Re: [PATCH v2] PCI: imx6: Save and restore MSI control of RC in suspend and resume

From: Lorenzo Pieralisi
Date: Tue Mar 14 2023 - 06:34:22 EST


On Tue, Mar 14, 2023 at 03:24:28AM +0000, Hongxing Zhu wrote:
> > -----Original Message-----
> > From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
> > Sent: 2023年3月14日 1:49
> > To: Hongxing Zhu <hongxing.zhu@xxxxxxx>
> > Cc: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>; l.stach@xxxxxxxxxxxxxx;
> > bhelgaas@xxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx;
> > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> > kernel@xxxxxxxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx>
> > Subject: Re: [PATCH v2] PCI: imx6: Save and restore MSI control of RC in
> > suspend and resume
> >
> > On Mon, Mar 13, 2023 at 02:50:31AM +0000, Hongxing Zhu wrote:
> > > > -----Original Message-----
> > > > From: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
> > > > Sent: 2023年3月11日 0:14
> > > > To: Hongxing Zhu <hongxing.zhu@xxxxxxx>
> > > > Cc: l.stach@xxxxxxxxxxxxxx; bhelgaas@xxxxxxxxxx;
> > > > linux-pci@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> > > > linux-kernel@xxxxxxxxxxxxxxx; kernel@xxxxxxxxxxxxxx; dl-linux-imx
> > > > <linux-imx@xxxxxxx>
> > > > Subject: Re: [PATCH v2] PCI: imx6: Save and restore MSI control of
> > > > RC in suspend and resume
> > > >
> > > > On Mon, Jan 09, 2023 at 02:08:06AM +0000, Hongxing Zhu wrote:
> > > > > > -----Original Message-----
> > > > > > From: Lorenzo Pieralisi <lpieralisi@xxxxxxxxxx>
> > > > > > Sent: 2022年12月30日 23:06
> > > > > > To: Hongxing Zhu <hongxing.zhu@xxxxxxx>; l.stach@xxxxxxxxxxxxxx;
> > > > > > bhelgaas@xxxxxxxxxx
> > > > > > Cc: linux-pci@xxxxxxxxxxxxxxx;
> > > > > > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> > > > > > linux-kernel@xxxxxxxxxxxxxxx; kernel@xxxxxxxxxxxxxx;
> > > > > > dl-linux-imx <linux-imx@xxxxxxx>
> > > > > > Subject: Re: [PATCH v2] PCI: imx6: Save and restore MSI control
> > > > > > of RC in suspend and resume
> > > > > >
> > > > > > On Thu, Dec 08, 2022 at 02:05:34PM +0800, Richard Zhu wrote:
> > > > > > > The MSI Enable bit controls delivery of MSI interrupts from
> > > > > > > components below the Root Port. This bit might lost during the
> > > > > > > suspend, should be re-stored during resume.
> > > > > > >
> > > > > > > Save the MSI control during suspend, and restore it in resume.
> > > > > >
> > > > > > I believe that what Lucas and Bjorn asked on v1 is still not answered.
> > > > > >
> > > > > > The root port is a PCI device, why do we need to save and
> > > > > > restore the MSI cap on top of what PCI core already does ? The
> > > > > > RP should be enumerated as a PCI device and therefore I expect
> > > > > > the MSI cap to be saved/restored in the suspend/resume execution.
> > > > > >
> > > > > > I don't think there is anything iMX6 specific in this.
> > > > > Hi Lorenzo:
> > > > > Thanks for your comments.
> > > > > Sorry to reply late, since I got a high fever in the past days.
> > > > >
> > > > > Based on i.MX6QP SABRESD board and XHCI PCIe2USB3.0 device, the
> > > > > MSI cap save/restore of PCI core is not executed(dev->msi_enabled
> > > > > is
> > > > > zero) during my suspend/resume tests.
> > > >
> > > > I still do not understand. The register you are saving/restoring in
> > > > the RC is not the root port Message control field in the root port
> > > > MSI capability, it is a separate register that controls the root
> > > > complex MSI forwarding, is that correct ?
> > > >
> > > > The root port MSI capability does not control the root complex
> > > > forwarding of MSIs TLPs.
> > > >
> > > > So the bits you are saving and restoring IIUC should be MMIO space
> > > > in the root complex, dressed as an MSI capability, that has nothing
> > > > to do with the root port MSI capability.
> > > >
> > > > Is that correct ?
> > >
> > > It's not a separate register.
> > >
> > > The bit I manipulated is the MSI Enable bit of the Message Control
> > > Register for MSI (Offset 02h) contained in the MSI-capability of Root
> > > Complex.
> > >
> > > In addition, on i.MX6, the MSI Enable bit controls delivery of MSI
> > > interrupts from components below the Root Port.
> > >
> > > So, set MSI Enable in imx6q-pcie to let the MSI from downstream
> > > components works.
> >
> > My confusion is about this "MSI Capability" found by
> > "dw_pcie_find_capability(pci, PCI_CAP_ID_MSI)" in your patch.
> >
> > The i.MX6 manual might refer to that as an "MSI Capability" but as far as I
> > know, the PCIe base spec doesn't document a Root Complex MSI Capability.
> >
> > I don't think it's the same as the one documented in PCIe r6.0, sec 7.7.2. I
> > think it's different because:
> >
> > (1) I *think* "pci" here refers to the RC, not to a Root Port.
> >
> > (2) The semantics are different. The MSI-X Enable bit in 7.7.2 only
> > determines whether the Function itself is permitted to use MSI-X.
> > It has nothing to do with devices *below* a Root Port can use MSI-X.
> > It also has nothing to do with whether a Root Port can forward MSI
> > transactions from those downstream devices.
> >
> > This part of my confusion could be easily resolved via a comment.
> >
> > I do have a follow-on question, though: the patch seems to enable
> > MSI-related functionality using a register in the DesignWare IP, not something
> > in the i.MX6-specific IP. If that's true, why don't other DesignWare-based
> > drivers need something similar?
> Hi Bjorn:
> Thanks a lot for you reply.
> This behavior is specific for i.MX PCIe.

Which behaviour ? It can't be the root port MSI capability, that would
be a HW bug (ie disabling root port MSIs would imply disabling MSIs for all
downstream components).

> i.MX PCIe designer use this MSI_EN bit to control the MSI trigger when
> integrate Design Ware PCIe IP.

Fair enough but that can't be the MSI Enable bit in the Root Port MSI
capability "Message Control" field I am afraid.

It is what Bjorn mentioned quite clearly, a root complex configuration
register dressed as an MSI capability, the root complex is not a PCI
device; either that or that's an HW bug.

Lorenzo

> So, the other DesignWare-base PCIe driver doesn't need this beahvior.
>
> Best Regards
> Richard Zhu
> >
> > > > > It seems that some device might shutdown msi when do the suspend
> > > > operations.
> > > > > >
> > > > > > Would you mind investigating it please ?
> > > > > Sure, I did further investigation on i.MX6QP platform.
> > > > > The MSI_EN bit of RC MSI capability would be cleared to zero, when
> > > > > PCIE_RESET(BIT29 of IOMUXC_GPR1) is toggled (assertion 1b'1,
> > > > > then de-assertion 1b'0).
> > > > >
> > > > > Verification steps:
> > > > > MSI_EN of RC is set to 1b'1 when system is boot up.
> > > > > ./memtool 1ffc050 1
> > > > > 0x01FFC050: 01017005
> > > > >
> > > > > Toggle PCIe reset of i.MX6QP.
> > > > > root@imx6qpdlsolox:~# ./memtool 20e0004=68691005 Writing 32-bit
> > > > > value
> > > > > 0x68691005 to address 0x020E0004 root@imx6qpdlsolox:~# ./memtool
> > > > > 20e0004=48691005 Writing 32-bit value 0x48691005 to address
> > > > 0x020E0004
> > > > >
> > > > > The MSI_EN bit of RC had been cleared to 1b'0.
> > > > > ./memtool 1ffc050 1
> > > > > 0x01FFC050: 01807005
> > > > >
> > > > > This is why I used to reply to Bjorn the MSI_EN of RC is cleared
> > > > > when RESETs are toggled during the imx6_pcie_host_init() in
> > > > > imx6_pcie_resume_noirq() callback.
> > > > >
> > > > > Best Regards
> > > > > Richard Zhu
> > > > > >
> > > > > > Lorenzo
> > > > > >
> > > > > > > Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx>
> > > > > > > ---
> > > > > > > Changes v1-->v2:
> > > > > > > New create one save/restore function, used save the setting in
> > > > > > > suspend and restore the configuration in resume.
> > > > > > > v1
> > > > > > > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2
> > > > > > > F%2F
> > > > > > >
> > > >
> > patc%2F&data=05%7C01%7Chongxing.zhu%40nxp.com%7C24971d8de9b54b
> > > > 0b10
> > > > > > >
> > > >
> > ad08db2182774d%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6
> > > > 38140
> > > > > > >
> > > >
> > 616456052078%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJ
> > > > QIjoiV
> > > > > > >
> > > >
> > 2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=vE
> > > > tRxL
> > > > > > > BVi5lYmpwTNZfafMms3263LZXodneLChjEaOM%3D&reserved=0
> > > > > > >
> > > > > >
> > > >
> > hwork.kernel.org%2Fproject%2Flinux-pci%2Fpatch%2F1667289595-12440-1-
> > > > > > g
> > > > > > i
> > > > > > >
> > > > > >
> > > >
> > t-send-email-hongxing.zhu%40nxp.com%2F&data=05%7C01%7Chongxing.zhu
> > > > > > %40n
> > > > > > >
> > > > > >
> > > >
> > xp.com%7C3aeb1d128f854dad1a5608daea77706d%7C686ea1d3bc2b4c6fa9
> > > > 2
> > > > > > cd99c5c
> > > > > > >
> > > > > >
> > > >
> > 301635%7C0%7C0%7C638080095954881374%7CUnknown%7CTWFpbGZsb3
> > > > > > d8eyJWIjoiMC
> > > > > > >
> > > > > >
> > > >
> > 4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000
> > > > %
> > > > > > 7C%7C%
> > > > > > >
> > > > > >
> > > >
> > 7C&sdata=V8yVvvpTKGoR1UyQP5HD2IdlSjJdznBeD12bdI67dEI%3D&reserved
> > > > =
> > > > > > 0
> > > > > > >
> > > > > > > ---
> > > > > > > drivers/pci/controller/dwc/pci-imx6.c | 23
> > > > > > > +++++++++++++++++++++++
> > > > > > > 1 file changed, 23 insertions(+)
> > > > > > >
> > > > > > > diff --git a/drivers/pci/controller/dwc/pci-imx6.c
> > > > > > > b/drivers/pci/controller/dwc/pci-imx6.c
> > > > > > > index 1dde5c579edc..aa3096890c3b 100644
> > > > > > > --- a/drivers/pci/controller/dwc/pci-imx6.c
> > > > > > > +++ b/drivers/pci/controller/dwc/pci-imx6.c
> > > > > > > @@ -76,6 +76,7 @@ struct imx6_pcie {
> > > > > > > struct clk *pcie;
> > > > > > > struct clk *pcie_aux;
> > > > > > > struct regmap *iomuxc_gpr;
> > > > > > > + u16 msi_ctrl;
> > > > > > > u32 controller_id;
> > > > > > > struct reset_control *pciephy_reset;
> > > > > > > struct reset_control *apps_reset;
> > > > > > > @@ -1042,6 +1043,26 @@ static void imx6_pcie_pm_turnoff(struct
> > > > > > imx6_pcie *imx6_pcie)
> > > > > > > usleep_range(1000, 10000);
> > > > > > > }
> > > > > > >
> > > > > > > +static void imx6_pcie_msi_save_restore(struct imx6_pcie
> > > > > > > +*imx6_pcie, bool save) {
> > > > > > > + u8 offset;
> > > > > > > + u16 val;
> > > > > > > + struct dw_pcie *pci = imx6_pcie->pci;
> > > > > > > +
> > > > > > > + if (pci_msi_enabled()) {
> > > > > > > + offset = dw_pcie_find_capability(pci, PCI_CAP_ID_MSI);
> > > > > > > + if (save) {
> > > > > > > + val = dw_pcie_readw_dbi(pci, offset +
> > PCI_MSI_FLAGS);
> > > > > > > + imx6_pcie->msi_ctrl = val;
> > > > > > > + } else {
> > > > > > > + dw_pcie_dbi_ro_wr_en(pci);
> > > > > > > + val = imx6_pcie->msi_ctrl;
> > > > > > > + dw_pcie_writew_dbi(pci, offset + PCI_MSI_FLAGS,
> > val);
> > > > > > > + dw_pcie_dbi_ro_wr_dis(pci);
> > > > > > > + }
> > > > > > > + }
> > > > > > > +}
> > > > > > > +
> > > > > > > static int imx6_pcie_suspend_noirq(struct device *dev) {
> > > > > > > struct imx6_pcie *imx6_pcie = dev_get_drvdata(dev); @@
> > > > > > > -1050,6
> > > > > > > +1071,7 @@ static int imx6_pcie_suspend_noirq(struct device
> > > > > > > +*dev)
> > > > > > > if (!(imx6_pcie->drvdata->flags &
> > > > > > IMX6_PCIE_FLAG_SUPPORTS_SUSPEND))
> > > > > > > return 0;
> > > > > > >
> > > > > > > + imx6_pcie_msi_save_restore(imx6_pcie, true);
> > > > > > > imx6_pcie_pm_turnoff(imx6_pcie);
> > > > > > > imx6_pcie_stop_link(imx6_pcie->pci);
> > > > > > > imx6_pcie_host_exit(pp);
> > > > > > > @@ -1069,6 +1091,7 @@ static int imx6_pcie_resume_noirq(struct
> > > > > > > device
> > > > > > *dev)
> > > > > > > ret = imx6_pcie_host_init(pp);
> > > > > > > if (ret)
> > > > > > > return ret;
> > > > > > > + imx6_pcie_msi_save_restore(imx6_pcie, false);
> > > > > > > dw_pcie_setup_rc(pp);
> > > > > > >
> > > > > > > if (imx6_pcie->link_is_up)
> > > > > > > --
> > > > > > > 2.25.1