[PATCH 2/2] drm/bridge: ps8640: Add a cache for EDID
From: Pin-yen Lin
Date: Tue Mar 14 2023 - 07:01:02 EST
When there are multiple EDID reads, the bridge will be repeatedly
enabled and disabled. Add a cache for EDID to speed this up.
Signed-off-by: Pin-yen Lin <treapking@xxxxxxxxxxxx>
---
drivers/gpu/drm/bridge/parade-ps8640.c | 61 ++++++++++++++++----------
1 file changed, 37 insertions(+), 24 deletions(-)
diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c
index 08de501c436e..4d594be8b89c 100644
--- a/drivers/gpu/drm/bridge/parade-ps8640.c
+++ b/drivers/gpu/drm/bridge/parade-ps8640.c
@@ -105,6 +105,7 @@ struct ps8640 {
struct gpio_desc *gpio_reset;
struct gpio_desc *gpio_powerdown;
struct device_link *link;
+ struct edid *edid;
bool pre_enabled;
bool need_post_hpd_delay;
};
@@ -543,34 +544,37 @@ static struct edid *ps8640_bridge_get_edid(struct drm_bridge *bridge,
{
struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
bool poweroff = !ps_bridge->pre_enabled;
- struct edid *edid;
- /*
- * When we end calling get_edid() triggered by an ioctl, i.e
- *
- * drm_mode_getconnector (ioctl)
- * -> drm_helper_probe_single_connector_modes
- * -> drm_bridge_connector_get_modes
- * -> ps8640_bridge_get_edid
- *
- * We need to make sure that what we need is enabled before reading
- * EDID, for this chip, we need to do a full poweron, otherwise it will
- * fail.
- */
- if (poweroff)
- drm_atomic_bridge_chain_pre_enable(bridge, connector->state->state);
+ if (!ps_bridge->edid) {
+ /*
+ * When we end calling get_edid() triggered by an ioctl, i.e
+ *
+ * drm_mode_getconnector (ioctl)
+ * -> drm_helper_probe_single_connector_modes
+ * -> drm_bridge_connector_get_modes
+ * -> ps8640_bridge_get_edid
+ *
+ * We need to make sure that what we need is enabled before
+ * reading EDID, for this chip, we need to do a full poweron,
+ * otherwise it will fail.
+ */
+ if (poweroff)
+ drm_atomic_bridge_chain_pre_enable(bridge,
+ connector->state->state);
- edid = drm_get_edid(connector,
- ps_bridge->page[PAGE0_DP_CNTL]->adapter);
+ ps_bridge->edid = drm_get_edid(connector,
+ ps_bridge->page[PAGE0_DP_CNTL]->adapter);
- /*
- * If we call the get_edid() function without having enabled the chip
- * before, return the chip to its original power state.
- */
- if (poweroff)
- drm_atomic_bridge_chain_post_disable(bridge, connector->state->state);
+ /*
+ * If we call the get_edid() function without having enabled the
+ * chip before, return the chip to its original power state.
+ */
+ if (poweroff)
+ drm_atomic_bridge_chain_post_disable(bridge,
+ connector->state->state);
+ }
- return edid;
+ return drm_edid_duplicate(ps_bridge->edid);
}
static void ps8640_runtime_disable(void *data)
@@ -767,6 +771,14 @@ static int ps8640_probe(struct i2c_client *client)
return ret;
}
+static void ps8640_remove(struct i2c_client *client)
+{
+ struct ps8640 *ps_bridge = i2c_get_clientdata(client);
+
+ kfree(ps_bridge->edid);
+ ps_bridge->edid = NULL;
+}
+
static const struct of_device_id ps8640_match[] = {
{ .compatible = "parade,ps8640" },
{ }
@@ -775,6 +787,7 @@ MODULE_DEVICE_TABLE(of, ps8640_match);
static struct i2c_driver ps8640_driver = {
.probe_new = ps8640_probe,
+ .remove = ps8640_remove,
.driver = {
.name = "ps8640",
.of_match_table = ps8640_match,
--
2.40.0.rc1.284.g88254d51c5-goog