[PATCH v2 1/5] ARM: dts: imx6dl-yapp4: Move phy reset into switch node

[Michal Vokáč]

Drop the phy-reset-duration and phy-reset-gpios deprecated properties and
move reset-gpios under the switch node.

Signed-off-by: Michal Vokáč <michal.vokac@xxxxxxxxx>
---
Changes in v2:
- new patch 

 arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index aacbf317feea..cb1972f8e8d2 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -106,8 +106,6 @@ &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <20>;
 	phy-supply = <&sw2_reg>;
 	status = "okay";
 
@@ -131,6 +129,7 @@ phy_port3: phy@2 {
 		switch@10 {
 			compatible = "qca,qca8334";
 			reg = <10>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 
 			switch_ports: ports {
 				#address-cells = <1>;
-- 
2.25.1