Re: [PATCH v29 1/7] dt-bindings: mediatek: add ethdr definition for mt8195

From: Krzysztof Kozlowski
Date: Wed Mar 15 2023 - 03:16:53 EST


On 15/03/2023 04:45, Nancy Lin (林欣螢) wrote:

Trim the replies and remove unneeded context. You want to get the
attention of other people, not force them to read entire email.

>> + mediatek,gce-client-reg:>> + $ref: /schemas/types.yaml#/definitions/phandle-array
>> + description: The register of display function block to be set by
>> gce.
>> + There are 4 arguments in this property, gce node, subsys id,
>> offset and
>> + register size. The subsys id is defined in the gce header of
>> each chips
>> + include/dt-bindings/gce/<chip>-gce.h, mapping to the register
>> of display
>> + function block.
>> + items:
>> + items:
>> + - description: phandle of GCE
>> + - description: GCE subsys id
>> + - description: register offset
>> + - description: register size
>> + minItems: 7
>> + maxItems: 7
>> +
>
> Hi Rob and krzysztof,
>
> I got the two messages when running dt_binding_check [1]. This binding
> patch was sent previously in [2].
>
> If I remove the following items/minItems/maxItems in the mediatek,gce-
> client property, the two message disappear. I don't know what's wrong
> with the original syntax. Do you have any suggestions for this?
>
> - items:
> - items:
> - - description: phandle of GCE
> - - description: GCE subsys id
> - - description: register offset
> - - description: register size
> - minItems: 7
> - maxItems: 7
>
>
> [1].
> Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.examp
> le.dtb
> /proj/mtk19347/cros/src/third_party/kernel/v5.10/Documentation/devicetr
> ee/bindings/display/mediatek/mediatek,ethdr.example.dtb:
> hdr-engine@1c114000: mediatek,gce-client-reg:0: [4294967295, 7, 16384,
> 4096, 4294967295, 7, 20480, 4096, 4294967295, 7, 28672, 4096,
> 4294967295, 7, 36864, 4096, 4294967295, 7, 40960, 4096, 4294967295, 7,
> 45056, 4096, 4294967295, 7, 49152, 4096] is too long
> From schema:

This looks like known issue with phandles with variable number of
arguments. Either we add it to the exceptions or just define it in
reduced way like in other cases - only maxItems: 1 without describing items.


Best regards,
Krzysztof