Re: [PATCH] mmc: sdhci-of-esdhc: fix quirk to ignore command inhibit for data

[Adrian Hunter]

On 15/03/23 00:06, Georgii Kruglov wrote:
> If spec_reg is equal to 'SDHCI_PRESENT_STATE', esdhc_readl_fixup()
> fixes up register value and returns it immediately. As a result, the
> further block
> (spec_reg == SDHCI_PRESENT_STATE)
>     &&(esdhc->quirk_ignore_data_inhibit == true),
> is never executed.
> 
> The patch merges the second block into the first one.
> 
> Found by Linux Verification Center (linuxtesting.org) with SVACE.
> 
> Fixes: 1f1929f3f2fa ("mmc: sdhci-of-esdhc: add quirk to ignore command inhibit for data")
> Signed-off-by: Georgii Kruglov <georgy.kruglov@xxxxxxxxx>

Minor comment, otherwise:

Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>

> ---
>  drivers/mmc/host/sdhci-of-esdhc.c | 24 +++++++++++-------------
>  1 file changed, 11 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
> index 4712adac7f7c..cdbf1b6e1313 100644
> --- a/drivers/mmc/host/sdhci-of-esdhc.c
> +++ b/drivers/mmc/host/sdhci-of-esdhc.c
> @@ -133,6 +133,7 @@ static u32 esdhc_readl_fixup(struct sdhci_host *host,
>  			return ret;
>  		}
>  	}
> +
>  	/*
>  	 * The DAT[3:0] line signal levels and the CMD line signal level are
>  	 * not compatible with standard SDHC register. The line signal levels
> @@ -144,6 +145,16 @@ static u32 esdhc_readl_fixup(struct sdhci_host *host,
>  		ret = value & 0x000fffff;
>  		ret |= (value >> 4) & SDHCI_DATA_LVL_MASK;
>  		ret |= (value << 1) & SDHCI_CMD_LVL;
> +
> +		/*
> +		 * Some controllers have unreliable Data Line Active
> +		 * bit for commands with busy signal. This affects
> +		 * Command Inhibit (data) bit. Just ignore it since
> +		 * MMC core driver has already polled card status
> +		 * with CMD13 after any command with busy siganl.
> +		 */
> +		if (esdhc->quirk_ignore_data_inhibit == true)

Might as well drop the redundant '== true'

> +			ret &= ~SDHCI_DATA_INHIBIT;
>  		return ret;
>  	}
>  
> @@ -158,19 +169,6 @@ static u32 esdhc_readl_fixup(struct sdhci_host *host,
>  		return ret;
>  	}
>  
> -	/*
> -	 * Some controllers have unreliable Data Line Active
> -	 * bit for commands with busy signal. This affects
> -	 * Command Inhibit (data) bit. Just ignore it since
> -	 * MMC core driver has already polled card status
> -	 * with CMD13 after any command with busy siganl.
> -	 */
> -	if ((spec_reg == SDHCI_PRESENT_STATE) &&
> -	(esdhc->quirk_ignore_data_inhibit == true)) {
> -		ret = value & ~SDHCI_DATA_INHIBIT;
> -		return ret;
> -	}
> -
>  	ret = value;
>  	return ret;
>  }