Re: [PATCH 0/5] can: tcan4x5x: Introduce tcan4552/4553

[Markus Schneider-Pargmann]

Hi Michal,

On Tue, Mar 14, 2023 at 07:26:59PM +0100, Michal Kubiak wrote:
> On Tue, Mar 14, 2023 at 04:11:56PM +0100, Markus Schneider-Pargmann wrote:
> > Hi Marc and everyone,
> > 
> > This series introduces two new chips tcan-4552 and tcan-4553. The
> > generic driver works in general but needs a few small changes. These are
> > caused by the removal of wake and state pins.
> > 
> > I included two patches from the optimization series and will remove them
> > from the optimization series. Hopefully it avoids conflicts and not
> > polute the other series with tcan4552/4553 stuff.
> > 
> > Best,
> > Markus
> > 
> > optimization series:
> > https://lore.kernel.org/lkml/20221221152537.751564-1-msp@xxxxxxxxxxxx
> > 
> > Markus Schneider-Pargmann (5):
> >   dt-bindings: can: tcan4x5x: Add tcan4552 and tcan4553 variants
> >   can: tcan4x5x: Remove reserved register 0x814 from writable table
> >   can: tcan4x5x: Check size of mram configuration
> >   can: tcan4x5x: Rename ID registers to match datasheet
> >   can: tcan4x5x: Add support for tcan4552/4553
> > 
> >  .../devicetree/bindings/net/can/tcan4x5x.txt  |  11 +-
> >  drivers/net/can/m_can/m_can.c                 |  16 +++
> >  drivers/net/can/m_can/m_can.h                 |   1 +
> >  drivers/net/can/m_can/tcan4x5x-core.c         | 122 ++++++++++++++----
> >  drivers/net/can/m_can/tcan4x5x-regmap.c       |   1 -
> >  5 files changed, 121 insertions(+), 30 deletions(-)
> >
> 
> The logic and coding style looks OK to me, but CAN-specific stuff should
> be reviewed by someone else.
> Just one nitpick in the last patch.
> 
> Thanks,
> Michal
> 
> For entire series:
> Reviewed-by: Michal Kubiak <michal.kubiak@xxxxxxxxx>

Thanks for your review, I fixed the nitpick.

Best,
Markus