Re: [PATCH v3 4/4] arm64: dts: qcom: Add Acer Aspire 1

[Nikita Travkin]

Krzysztof Kozlowski писал(а) 15.03.2023 21:09:
> On 15/03/2023 16:43, Nikita Travkin wrote:
>> Acer Aspire 1 is a WoA laptop based on Snapdragon 7c gen1 platform.
>>
>> The laptop design is similar to trogdor in the choice of primary
>> components but the specifics on usage of those differ slightly.
>>
>> Add the devicetree for the laptop with support for most of the
>> hardware present.
>>
>> Signed-off-by: Nikita Travkin <nikita@xxxxxxx>
>> ---
>> Changed in v2:
>>  - Various styling, ordering and node naming issues fixed. (Krzysztof)
>>
>> Changed in v3:
>>  - Kepp camcc on, wakeup on touchpad, minor style issues. (Konrad)
>> ---
>>  arch/arm64/boot/dts/qcom/Makefile             |   1 +
>>  .../boot/dts/qcom/sc7180-acer-aspire1.dts     | 859 ++++++++++++++++++
>>  2 files changed, 860 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index 89e23a74bc7f..4bd4b4079b17 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sa8155p-adp.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= sa8540p-ride.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= sa8775p-ride.dtb
>> +dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-acer-aspire1.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1-lte.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
>> new file mode 100644
>> index 000000000000..b4161f1f21a7
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
>> @@ -0,0 +1,859 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +
>> +/dts-v1/;
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>> +
>> +#include "sc7180.dtsi"
>> +
>> +#include "pm6150.dtsi"
>> +#include "pm6150l.dtsi"
>> +
>> +/delete-node/ &tz_mem;
>> +/delete-node/ &ipa_fw_mem;
>> +
>> +/ {
>> +	model = "Acer Aspire 1";
>> +	compatible = "acer,aspire1", "qcom,sc7180";
>> +	chassis-type = "laptop";
>> +
>> +	aliases {
>> +		bluetooth0 = &bluetooth;
>> +		hsuart0 = &uart3;
>> +		serial0 = &uart8;
>> +		wifi0 = &wifi;
>> +	};
>> +
>> +	chosen {
>> +		stdout-path = "serial0:115200n8";
>> +	};
>> +
>> +	reserved-memory {
> 
> I still don't think it is ordered by name.... "r" is definitely after "a".

Yes, as I said before, I want to separate the "special" DT spec nodes
(aliases, chosen, reserved-memory, ... that are defined in the
chapter 3 of the DT spec) from the other, device nodes.

I see them on the top on many other boards and I believe this separation
makes sense since those are not really devices but "more extended"
properties of the board as a whole.

If you still believe those must be mixed together and sorted, please 
explicitly let me know that and I will change the order.

Also, if there is any documentation that already enforces the order,
making clear that my opinion is wrong, I would appreciate you pointing
me to that.

Regards,
Nikita

> 
> Best regards,
> Krzysztof