Re: [PATCH v12 2/2] mfd: max597x: Add support for MAX5970 and MAX5978
From: Lee Jones
Date: Wed Mar 15 2023 - 13:47:44 EST
On Tue, 07 Mar 2023, Naresh Solanki wrote:
> From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
>
> Implement a regulator driver with IRQ support for fault management.
> Written against documentation [1] and [2] and tested on real hardware.
>
> Every channel has it's own regulator supply nammed 'vss1-supply' and
> 'vss2-supply'. The regulator supply is used to determine the output
> voltage, as the smart switch provides no output regulation.
> The driver requires the 'shunt-resistor-micro-ohms' to be present in
> the devicetree to properly calculate current related values.
>
> You must specify compatible devictree layout:
>
> regulator@3a {
> reg = <0x3a>;
> vss1-supply = <&p3v3>;
> compatible = "maxim,max5978";
>
> ...
>
> regulators {
> sw0_ref: SW0 {
> regulator-compatible = "SW0";
> shunt-resistor-micro-ohms = <12000>;
> ...
> }
> }
> }
>
> 1: https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf
> 2: https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf
>
> Signed-off-by: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
> Signed-off-by: Marcello Sylvester Bauer <sylv@xxxxxxx>
> Signed-off-by: Naresh Solanki <Naresh.Solanki@xxxxxxxxxxxxx>
> ...
> Changes in V12:
> - Use simple_mfd_i2c driver and remove previous implementation.
> - Remove newline
> - Use _MFD_MAX597X_H in header file
> - Successfull build need following patch from regulator:
> https://lore.kernel.org/r/20230216075302.68935-1-Naresh.Solanki@xxxxxxxxxxxxx
> https://lore.kernel.org/r/20230210163225.1208035-1-Naresh.Solanki@xxxxxxxxxxxxx
> ---
> drivers/mfd/Kconfig | 10 ++++
> drivers/mfd/simple-mfd-i2c.c | 13 +++++
> include/linux/mfd/max597x.h | 96 ++++++++++++++++++++++++++++++++++++
> 3 files changed, 119 insertions(+)
> create mode 100644 include/linux/mfd/max597x.h
Applied, thanks
--
Lee Jones [李琼斯]