Re: [PATCH v2] extcon: usbc-tusb320: unregister typec port on driver removal
From: Chanwoo Choi
Date: Wed Mar 15 2023 - 16:50:23 EST
On 23. 3. 15. 23:15, Alvin Šipraga wrote:
> From: Alvin Šipraga <alsi@xxxxxxxxxxxxxxx>
>
> The driver can register a typec port if suitable firmware properties are
> present. But if the driver is removed through sysfs unbind, rmmod or
> similar, then it does not clean up after itself and the typec port
> device remains registered. This can be seen in sysfs, where stale typec
> ports get left over in /sys/class/typec.
>
> In order to fix this we have to add an i2c_driver remove function and
> call typec_unregister_port(), which is a no-op in the case where no
> typec port is created and the pointer remains NULL.
>
> In the process we should also put the fwnode_handle when the typec port
> isn't registered anymore, including if an error occurs during probe. The
> typec subsystem does not increase or decrease the reference counter for
> us, so we track it in the driver's private data.
>
> Note that the conditional check on TYPEC_PWR_MODE_PD was removed in the
> probe path because a call to tusb320_set_adv_pwr_mode() will perform an
> even more robust validation immediately after, hence there is no
> functional change here.
>
> Fixes: bf7571c00dca ("extcon: usbc-tusb320: Add USB TYPE-C support")
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Alvin Šipraga <alsi@xxxxxxxxxxxxxxx>
> ---
> v2: properly assign priv->connector_fwnode = connector;
> ---
> drivers/extcon/extcon-usbc-tusb320.c | 42 ++++++++++++++++++++++------
> 1 file changed, 34 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/extcon/extcon-usbc-tusb320.c b/drivers/extcon/extcon-usbc-tusb320.c
> index b408ce989c22..10dff1c512c4 100644
> --- a/drivers/extcon/extcon-usbc-tusb320.c
> +++ b/drivers/extcon/extcon-usbc-tusb320.c
> @@ -78,6 +78,7 @@ struct tusb320_priv {
> struct typec_capability cap;
> enum typec_port_type port_type;
> enum typec_pwr_opmode pwr_opmode;
> + struct fwnode_handle *connector_fwnode;
> };
>
> static const char * const tusb_attached_states[] = {
> @@ -391,27 +392,25 @@ static int tusb320_typec_probe(struct i2c_client *client,
> /* Type-C connector found. */
> ret = typec_get_fw_cap(&priv->cap, connector);
> if (ret)
> - return ret;
> + goto err_put;
>
> priv->port_type = priv->cap.type;
>
> /* This goes into register 0x8 field CURRENT_MODE_ADVERTISE */
> ret = fwnode_property_read_string(connector, "typec-power-opmode", &cap_str);
> if (ret)
> - return ret;
> + goto err_put;
>
> ret = typec_find_pwr_opmode(cap_str);
> if (ret < 0)
> - return ret;
> - if (ret == TYPEC_PWR_MODE_PD)
> - return -EINVAL;
> + goto err_put;
>
> priv->pwr_opmode = ret;
>
> /* Initialize the hardware with the devicetree settings. */
> ret = tusb320_set_adv_pwr_mode(priv);
> if (ret)
> - return ret;
> + goto err_put;
>
> priv->cap.revision = USB_TYPEC_REV_1_1;
> priv->cap.accessory[0] = TYPEC_ACCESSORY_AUDIO;
> @@ -422,10 +421,25 @@ static int tusb320_typec_probe(struct i2c_client *client,
> priv->cap.fwnode = connector;
>
> priv->port = typec_register_port(&client->dev, &priv->cap);
> - if (IS_ERR(priv->port))
> - return PTR_ERR(priv->port);
> + if (IS_ERR(priv->port)) {
> + ret = PTR_ERR(priv->port);
> + goto err_put;
> + }
> +
> + priv->connector_fwnode = connector;
>
> return 0;
> +
> +err_put:
> + fwnode_handle_put(connector);
> +
> + return ret;
> +}
> +
> +static void tusb320_typec_remove(struct tusb320_priv *priv)
> +{
> + typec_unregister_port(priv->port);
> + fwnode_handle_put(priv->connector_fwnode);
> }
>
> static int tusb320_probe(struct i2c_client *client)
> @@ -438,7 +452,9 @@ static int tusb320_probe(struct i2c_client *client)
> priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
> if (!priv)
> return -ENOMEM;
> +
> priv->dev = &client->dev;
> + i2c_set_clientdata(client, priv);
>
> priv->regmap = devm_regmap_init_i2c(client, &tusb320_regmap_config);
> if (IS_ERR(priv->regmap))
> @@ -489,10 +505,19 @@ static int tusb320_probe(struct i2c_client *client)
> tusb320_irq_handler,
> IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> client->name, priv);
> + if (ret)
> + tusb320_typec_remove(priv);
>
> return ret;
> }
>
> +static void tusb320_remove(struct i2c_client *client)
> +{
> + struct tusb320_priv *priv = i2c_get_clientdata(client);
> +
> + tusb320_typec_remove(priv);
> +}
> +
> static const struct of_device_id tusb320_extcon_dt_match[] = {
> { .compatible = "ti,tusb320", .data = &tusb320_ops, },
> { .compatible = "ti,tusb320l", .data = &tusb320l_ops, },
> @@ -502,6 +527,7 @@ MODULE_DEVICE_TABLE(of, tusb320_extcon_dt_match);
>
> static struct i2c_driver tusb320_extcon_driver = {
> .probe_new = tusb320_probe,
> + .remove = tusb320_remove,
> .driver = {
> .name = "extcon-tusb320",
> .of_match_table = tusb320_extcon_dt_match,
Applied it. Thanks.
--
Best Regards,
Samsung Electronics
Chanwoo Choi