[RESEND PATCH 3/4] staging: rtl8192e: add spaces around binary operators

[Khadija Kamran]

Use spaces around binary operators as suggested by Linux kernel coding
style.
Issues reported by checkpatch.pl for the following binary operators:
	+ , - , * , | , <<

Signed-off-by: Khadija Kamran <kamrankhadijadj@xxxxxxxxx>
---
 drivers/staging/rtl8192e/rtllib_rx.c | 54 ++++++++++++++--------------
 1 file changed, 27 insertions(+), 27 deletions(-)

diff --git a/drivers/staging/rtl8192e/rtllib_rx.c b/drivers/staging/rtl8192e/rtllib_rx.c
index 7144a0630ea6..f627dfe66d90 100644
--- a/drivers/staging/rtl8192e/rtllib_rx.c
+++ b/drivers/staging/rtl8192e/rtllib_rx.c
@@ -356,7 +356,7 @@ rtllib_rx_frame_decrypt_msdu(struct rtllib_device *ieee, struct sk_buff *skb,
 }

 /* this function is stolen from ipw2200 driver*/
-#define IEEE_PACKET_RETRY_TIME (5*HZ)
+#define IEEE_PACKET_RETRY_TIME (5 * HZ)
 static int is_duplicate_packet(struct rtllib_device *ieee,
 				      struct rtllib_hdr_4addr *header)
 {
@@ -936,7 +936,7 @@ static int rtllib_rx_check_duplicate(struct rtllib_device *ieee,

 		if (GetTs(ieee, (struct ts_common_info **)&pRxTS, hdr->addr2,
 			(u8)Frame_QoSTID((u8 *)(skb->data)), RX_DIR, true)) {
-			if ((fc & (1<<11)) && (frag == pRxTS->rx_last_frag_num) &&
+			if ((fc & (1 << 11)) && (frag == pRxTS->rx_last_frag_num) &&
 			    (WLAN_GET_SEQ_SEQ(sc) == pRxTS->rx_last_seq_num))
 				return -1;
 			pRxTS->rx_last_frag_num = frag;
@@ -1619,23 +1619,23 @@ static int rtllib_qos_convert_ac_to_parameters(struct rtllib_qos_parameter_info
 		case 1:
 			/* BIT(0) | BIT(3) */
 			if (acm)
-				qos_data->wmm_acm |= (0x01<<0)|(0x01<<3);
+				qos_data->wmm_acm |= (0x01 << 0) | (0x01 << 3);
 			break;
 		case 2:
 			/* BIT(4) | BIT(5) */
 			if (acm)
-				qos_data->wmm_acm |= (0x01<<4)|(0x01<<5);
+				qos_data->wmm_acm |= (0x01 << 4) | (0x01 << 5);
 			break;
 		case 3:
 			/* BIT(6) | BIT(7) */
 			if (acm)
-				qos_data->wmm_acm |= (0x01<<6)|(0x01<<7);
+				qos_data->wmm_acm |= (0x01 << 6) | (0x01 << 7);
 			break;
 		case 0:
 		default:
 			/* BIT(1) | BIT(2) */
 			if (acm)
-				qos_data->wmm_acm |= (0x01<<1)|(0x01<<2);
+				qos_data->wmm_acm |= (0x01 << 1) | (0x01 << 2);
 			break;
 		}

@@ -1979,7 +1979,7 @@ static void rtllib_parse_mife_generic(struct rtllib_device *ieee,
 	    info_element->data[3] == 0x04) {
 		netdev_dbg(ieee->dev, "MFIE_TYPE_WZC: %d bytes\n",
 			   info_element->len);
-		network->wzc_ie_len = min(info_element->len+2, MAX_WZC_IE_LEN);
+		network->wzc_ie_len = min(info_element->len + 2, MAX_WZC_IE_LEN);
 		memcpy(network->wzc_ie, info_element, network->wzc_ie_len);
 	}
 }
@@ -2139,10 +2139,10 @@ int rtllib_parse_info_param(struct rtllib_device *ieee,
 			if (info_element->data[2] & 1)
 				network->dtim_data |= RTLLIB_DTIM_MBCAST;

-			offset = (info_element->data[2] >> 1)*2;
+			offset = (info_element->data[2] >> 1) * 2;

-			if (ieee->assoc_id < 8*offset ||
-			    ieee->assoc_id > 8*(offset + info_element->len - 3))
+			if (ieee->assoc_id < 8 * offset ||
+			    ieee->assoc_id > 8 * (offset + info_element->len - 3))
 				break;

 			offset = (ieee->assoc_id / 8) - offset;
@@ -2357,7 +2357,7 @@ static inline int rtllib_network_init(
 	if (rtllib_is_empty_essid(network->ssid, network->ssid_len))
 		network->flags |= NETWORK_EMPTY_ESSID;
 	stats->signal = 30 + (stats->SignalStrength * 70) / 100;
-	stats->noise = rtllib_translate_todbm((u8)(100-stats->signal)) - 25;
+	stats->noise = rtllib_translate_todbm((u8)(100 - stats->signal)) - 25;

 	memcpy(&network->stats, stats, sizeof(network->stats));

@@ -2545,22 +2545,22 @@ static inline void rtllib_process_probe_response(
 		   "'%s' ( %pM ): %c%c%c%c %c%c%c%c-%c%c%c%c %c%c%c%c\n",
 		   escape_essid(info_element->data, info_element->len),
 		   beacon->header.addr3,
-		   (le16_to_cpu(beacon->capability) & (1<<0xf)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0xe)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0xd)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0xc)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0xb)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0xa)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0x9)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0x8)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0x7)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0x6)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0x5)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0x4)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0x3)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0x2)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0x1)) ? '1' : '0',
-		   (le16_to_cpu(beacon->capability) & (1<<0x0)) ? '1' : '0');
+		   (le16_to_cpu(beacon->capability) & (1 << 0xf)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0xe)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0xd)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0xc)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0xb)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0xa)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0x9)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0x8)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0x7)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0x6)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0x5)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0x4)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0x3)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0x2)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0x1)) ? '1' : '0',
+		   (le16_to_cpu(beacon->capability) & (1 << 0x0)) ? '1' : '0');

 	if (rtllib_network_init(ieee, beacon, network, stats)) {
 		netdev_dbg(ieee->dev, "Dropped '%s' ( %pM) via %s.\n",
--
2.34.1