[PATCH v3 2/9] perf vendor events: Broadwellde v9 events

From: Ian Rogers
Date: Fri Mar 24 2023 - 03:23:18 EST

Next message: Ian Rogers: "[PATCH v3 3/9] perf vendor events: Broadwellx v20 events"
Previous message: Yosry Ahmed: "Re: [RFC PATCH 1/7] cgroup: rstat: only disable interrupts for the percpu lock"
In reply to: Ian Rogers: "[PATCH v3 1/9] perf vendor events: Broadwell v27 events"
Next in thread: Ian Rogers: "[PATCH v3 3/9] perf vendor events: Broadwellx v20 events"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Updates descriptions and encodings. Adds BR_MISP_EXEC.INDIRECT events.

Signed-off-by: Ian Rogers <irogers@xxxxxxxxxx>
---
.../arch/x86/broadwellde/cache.json | 105 +++----
.../arch/x86/broadwellde/floating-point.json | 45 +--
.../arch/x86/broadwellde/frontend.json | 18 +-
.../arch/x86/broadwellde/memory.json | 64 +++--
.../arch/x86/broadwellde/pipeline.json | 79 +++---
.../arch/x86/broadwellde/uncore-cache.json | 72 ++---
.../arch/x86/broadwellde/uncore-memory.json | 256 +++++++++++++++++-
.../arch/x86/broadwellde/uncore-other.json | 27 +-
.../arch/x86/broadwellde/uncore-power.json | 10 +-
tools/perf/pmu-events/arch/x86/mapfile.csv | 2 +-
10 files changed, 495 insertions(+), 183 deletions(-)

diff --git a/tools/perf/pmu-events/arch/x86/broadwellde/cache.json b/tools/perf/pmu-events/arch/x86/broadwellde/cache.json
index fcc99fd22b0a..6784331ac1cb 100644
--- a/tools/perf/pmu-events/arch/x86/broadwellde/cache.json
+++ b/tools/perf/pmu-events/arch/x86/broadwellde/cache.json
@@ -8,7 +8,7 @@
"UMask": "0x1"
},
{
- "BriefDescription": "Cycles a demand request was blocked due to Fill Buffers inavailability.",
+ "BriefDescription": "Cycles a demand request was blocked due to Fill Buffers unavailability.",
"CounterMask": "1",
"EventCode": "0x48",
"EventName": "L1D_PEND_MISS.FB_FULL",
@@ -16,7 +16,7 @@
"UMask": "0x2"
},
{
- "BriefDescription": "L1D miss oustandings duration in cycles",
+ "BriefDescription": "L1D miss outstandings duration in cycles",
"EventCode": "0x48",
"EventName": "L1D_PEND_MISS.PENDING",
"PublicDescription": "This event counts duration of L1D miss outstanding, that is each cycle number of Fill Buffers (FB) outstanding required by Demand Reads. FB either is held by demand loads, or it is held by non-demand loads and gets hit at least once by demand. The valid outstanding interval is defined until the FB deallocation by one of the following ways: from FB allocation, if FB is allocated by demand; from the demand Hit FB, if it is allocated by hardware or software prefetch.\nNote: In the L1D, a Demand Read contains cacheable or noncacheable demand loads, including ones causing cache-line splits and reads due to page walks resulted from any request type.",
@@ -139,7 +139,7 @@
"EventCode": "0x24",
"EventName": "L2_RQSTS.CODE_RD_HIT",
"SampleAfterValue": "200003",
- "UMask": "0x44"
+ "UMask": "0xc4"
},
{
"BriefDescription": "L2 cache misses when fetching instructions.",
@@ -152,9 +152,9 @@
"BriefDescription": "Demand Data Read requests that hit L2 cache",
"EventCode": "0x24",
"EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT",
- "PublicDescription": "This event counts the number of demand Data Read requests that hit L2 cache. Only not rejected loads are counted.",
+ "PublicDescription": "Counts the number of demand Data Read requests, initiated by load instructions, that hit L2 cache.",
"SampleAfterValue": "200003",
- "UMask": "0x41"
+ "UMask": "0xc1"
},
{
"BriefDescription": "Demand Data Read miss L2, no rejects",
@@ -170,7 +170,7 @@
"EventName": "L2_RQSTS.L2_PF_HIT",
"PublicDescription": "This event counts the number of requests from the L2 hardware prefetchers that hit L2 cache. L3 prefetch new types.",
"SampleAfterValue": "200003",
- "UMask": "0x50"
+ "UMask": "0xd0"
},
{
"BriefDescription": "L2 prefetch requests that miss L2 cache",
@@ -199,7 +199,7 @@
"EventCode": "0x24",
"EventName": "L2_RQSTS.RFO_HIT",
"SampleAfterValue": "200003",
- "UMask": "0x42"
+ "UMask": "0xc2"
},
{
"BriefDescription": "RFO requests that miss L2 cache.",
@@ -297,61 +297,62 @@
"UMask": "0x4f"
},
{
- "BriefDescription": "Retired load uops which data sources were L3 and cross-core snoop hits in on-pkg core cache. (Precise Event - PEBS)",
+ "BriefDescription": "Retired load uops which data sources were L3 and cross-core snoop hits in on-pkg core cache.",
"Data_LA": "1",
"Errata": "BDM100",
"EventCode": "0xD2",
"EventName": "MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_HIT",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were L3 hit and a cross-core snoop hit in the on-pkg core cache.",
+ "PublicDescription": "This event counts retired load uops which data sources were L3 hit and a cross-core snoop hit in the on-pkg core cache.",
"SampleAfterValue": "20011",
"UMask": "0x2"
},
{
- "BriefDescription": "Retired load uops which data sources were HitM responses from shared L3. (Precise Event - PEBS)",
+ "BriefDescription": "Retired load uops which data sources were HitM responses from shared L3.",
"Data_LA": "1",
"Errata": "BDM100",
"EventCode": "0xD2",
"EventName": "MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_HITM",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were HitM responses from a core on same socket (shared L3).",
+ "PublicDescription": "This event counts retired load uops which data sources were HitM responses from a core on same socket (shared L3).",
"SampleAfterValue": "20011",
"UMask": "0x4"
},
{
- "BriefDescription": "Retired load uops which data sources were L3 hit and cross-core snoop missed in on-pkg core cache. (Precise Event - PEBS)",
+ "BriefDescription": "Retired load uops which data sources were L3 hit and cross-core snoop missed in on-pkg core cache.",
"Data_LA": "1",
"Errata": "BDM100",
"EventCode": "0xD2",
"EventName": "MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_MISS",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were L3 Hit and a cross-core snoop missed in the on-pkg core cache.",
+ "PublicDescription": "This event counts retired load uops which data sources were L3 Hit and a cross-core snoop missed in the on-pkg core cache.",
"SampleAfterValue": "20011",
"UMask": "0x1"
},
{
- "BriefDescription": "Retired load uops which data sources were hits in L3 without snoops required. (Precise Event - PEBS)",
+ "BriefDescription": "Retired load uops which data sources were hits in L3 without snoops required.",
"Data_LA": "1",
"Errata": "BDM100",
"EventCode": "0xD2",
"EventName": "MEM_LOAD_UOPS_L3_HIT_RETIRED.XSNP_NONE",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were hits in the last-level (L3) cache without snoops required.",
+ "PublicDescription": "This event counts retired load uops which data sources were hits in the last-level (L3) cache without snoops required.",
"SampleAfterValue": "100003",
"UMask": "0x8"
},
{
+ "BriefDescription": "Data from local DRAM either Snoop not needed or Snoop Miss (RspI)",
"Data_LA": "1",
"Errata": "BDE70, BDM100",
"EventCode": "0xD3",
"EventName": "MEM_LOAD_UOPS_L3_MISS_RETIRED.LOCAL_DRAM",
"PEBS": "1",
- "PublicDescription": "This event counts retired load uops where the data came from local DRAM. This does not include hardware prefetches. This is a precise event.",
+ "PublicDescription": "Retired load uop whose Data Source was: local DRAM either Snoop not needed or Snoop Miss (RspI).",
"SampleAfterValue": "100007",
"UMask": "0x1"
},
{
- "BriefDescription": "Retired load uop whose Data Source was: remote DRAM either Snoop not needed or Snoop Miss (RspI) (Precise Event)",
+ "BriefDescription": "Retired load uop whose Data Source was: remote DRAM either Snoop not needed or Snoop Miss (RspI)",
"Data_LA": "1",
"Errata": "BDE70",
"EventCode": "0xD3",
@@ -361,7 +362,7 @@
"UMask": "0x4"
},
{
- "BriefDescription": "Retired load uop whose Data Source was: forwarded from remote cache (Precise Event)",
+ "BriefDescription": "Retired load uop whose Data Source was: forwarded from remote cache",
"Data_LA": "1",
"Errata": "BDE70",
"EventCode": "0xD3",
@@ -371,7 +372,7 @@
"UMask": "0x20"
},
{
- "BriefDescription": "Retired load uop whose Data Source was: Remote cache HITM (Precise Event)",
+ "BriefDescription": "Retired load uop whose Data Source was: Remote cache HITM",
"Data_LA": "1",
"Errata": "BDE70",
"EventCode": "0xD3",
@@ -381,69 +382,69 @@
"UMask": "0x10"
},
{
- "BriefDescription": "Retired load uops which data sources were load uops missed L1 but hit FB due to preceding miss to the same cache line with data not ready. (Precise Event - PEBS)",
+ "BriefDescription": "Retired load uops which data sources were load uops missed L1 but hit FB due to preceding miss to the same cache line with data not ready.",
"Data_LA": "1",
"EventCode": "0xD1",
"EventName": "MEM_LOAD_UOPS_RETIRED.HIT_LFB",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were load uops missed L1 but hit a fill buffer due to a preceding miss to the same cache line with the data not ready.\nNote: Only two data-sources of L1/FB are applicable for AVX-256bit even though the corresponding AVX load could be serviced by a deeper level in the memory hierarchy. Data source is reported for the Low-half load.",
+ "PublicDescription": "This event counts retired load uops which data sources were load uops missed L1 but hit a fill buffer due to a preceding miss to the same cache line with the data not ready.\nNote: Only two data-sources of L1/FB are applicable for AVX-256bit even though the corresponding AVX load could be serviced by a deeper level in the memory hierarchy. Data source is reported for the Low-half load.",
"SampleAfterValue": "100003",
"UMask": "0x40"
},
{
- "BriefDescription": "Retired load uops with L1 cache hits as data sources. (Precise Event - PEBS)",
+ "BriefDescription": "Retired load uops with L1 cache hits as data sources.",
"Data_LA": "1",
"EventCode": "0xD1",
"EventName": "MEM_LOAD_UOPS_RETIRED.L1_HIT",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data source were hits in the nearest-level (L1) cache.\nNote: Only two data-sources of L1/FB are applicable for AVX-256bit even though the corresponding AVX load could be serviced by a deeper level in the memory hierarchy. Data source is reported for the Low-half load. This event also counts SW prefetches independent of the actual data source.",
+ "PublicDescription": "This event counts retired load uops which data sources were hits in the nearest-level (L1) cache.\nNote: Only two data-sources of L1/FB are applicable for AVX-256bit even though the corresponding AVX load could be serviced by a deeper level in the memory hierarchy. Data source is reported for the Low-half load. This event also counts SW prefetches independent of the actual data source.",
"SampleAfterValue": "2000003",
"UMask": "0x1"
},
{
- "BriefDescription": "Retired load uops misses in L1 cache as data sources. Uses PEBS.",
+ "BriefDescription": "Retired load uops misses in L1 cache as data sources.",
"Data_LA": "1",
"EventCode": "0xD1",
"EventName": "MEM_LOAD_UOPS_RETIRED.L1_MISS",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were misses in the nearest-level (L1) cache. Counting excludes unknown and UC data source.",
+ "PublicDescription": "This event counts retired load uops which data sources were misses in the nearest-level (L1) cache. Counting excludes unknown and UC data source.",
"SampleAfterValue": "100003",
"UMask": "0x8"
},
{
- "BriefDescription": "Retired load uops with L2 cache hits as data sources. (Precise Event - PEBS)",
+ "BriefDescription": "Retired load uops with L2 cache hits as data sources.",
"Data_LA": "1",
"Errata": "BDM35",
"EventCode": "0xD1",
"EventName": "MEM_LOAD_UOPS_RETIRED.L2_HIT",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were hits in the mid-level (L2) cache.",
+ "PublicDescription": "This event counts retired load uops which data sources were hits in the mid-level (L2) cache.",
"SampleAfterValue": "100003",
"UMask": "0x2"
},
{
- "BriefDescription": "Retired load uops with L2 cache misses as data sources. Uses PEBS.",
+ "BriefDescription": "Miss in mid-level (L2) cache. Excludes Unknown data-source.",
"Data_LA": "1",
"EventCode": "0xD1",
"EventName": "MEM_LOAD_UOPS_RETIRED.L2_MISS",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were misses in the mid-level (L2) cache. Counting excludes unknown and UC data source.",
+ "PublicDescription": "This event counts retired load uops which data sources were misses in the mid-level (L2) cache. Counting excludes unknown and UC data source.",
"SampleAfterValue": "50021",
"UMask": "0x10"
},
{
- "BriefDescription": "Hit in last-level (L3) cache. Excludes Unknown data-source. (Precise Event - PEBS)",
+ "BriefDescription": "Retired load uops which data sources were data hits in L3 without snoops required.",
"Data_LA": "1",
"Errata": "BDM100",
"EventCode": "0xD1",
"EventName": "MEM_LOAD_UOPS_RETIRED.L3_HIT",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts retired load uops which data sources were data hits in the last-level (L3) cache without snoops required.",
+ "PublicDescription": "This event counts retired load uops which data sources were data hits in the last-level (L3) cache without snoops required.",
"SampleAfterValue": "50021",
"UMask": "0x4"
},
{
- "BriefDescription": "Miss in last-level (L3) cache. Excludes Unknown data-source. (Precise Event - PEBS).",
+ "BriefDescription": "Miss in last-level (L3) cache. Excludes Unknown data-source.",
"Data_LA": "1",
"Errata": "BDM100, BDE70",
"EventCode": "0xD1",
@@ -453,73 +454,73 @@
"UMask": "0x20"
},
{
- "BriefDescription": "All retired load uops. (Precise Event - PEBS)",
+ "BriefDescription": "Retired load uops.",
"Data_LA": "1",
"EventCode": "0xD0",
"EventName": "MEM_UOPS_RETIRED.ALL_LOADS",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts load uops retired to the architected path with a filter on bits 0 and 1 applied.\nNote: This event ?ounts AVX-256bit load/store double-pump memory uops as a single uop at retirement. This event also counts SW prefetches.",
+ "PublicDescription": "Counts all retired load uops. This event accounts for SW prefetch uops of PREFETCHNTA or PREFETCHT0/1/2 or PREFETCHW.",
"SampleAfterValue": "2000003",
"UMask": "0x81"
},
{
- "BriefDescription": "Retired store uops that split across a cacheline boundary. (Precise Event - PEBS)",
+ "BriefDescription": "Retired store uops.",
"Data_LA": "1",
"EventCode": "0xD0",
"EventName": "MEM_UOPS_RETIRED.ALL_STORES",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts store uops retired to the architected path with a filter on bits 0 and 1 applied.\nNote: This event ?ounts AVX-256bit load/store double-pump memory uops as a single uop at retirement.",
+ "PublicDescription": "Counts all retired store uops.",
"SampleAfterValue": "2000003",
"UMask": "0x82"
},
{
- "BriefDescription": "Retired load uops with locked access. (Precise Event - PEBS)",
+ "BriefDescription": "Retired load uops with locked access.",
"Data_LA": "1",
"Errata": "BDM35",
"EventCode": "0xD0",
"EventName": "MEM_UOPS_RETIRED.LOCK_LOADS",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts load uops with locked access retired to the architected path.",
+ "PublicDescription": "This event counts load uops with locked access retired to the architected path.",
"SampleAfterValue": "100007",
"UMask": "0x21"
},
{
- "BriefDescription": "Retired load uops that split across a cacheline boundary.(Precise Event - PEBS)",
+ "BriefDescription": "Retired load uops that split across a cacheline boundary.",
"Data_LA": "1",
"EventCode": "0xD0",
"EventName": "MEM_UOPS_RETIRED.SPLIT_LOADS",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts line-splitted load uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
+ "PublicDescription": "This event counts line-splitted load uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
"SampleAfterValue": "100003",
"UMask": "0x41"
},
{
- "BriefDescription": "Retired store uops that split across a cacheline boundary. (Precise Event - PEBS)",
+ "BriefDescription": "Retired store uops that split across a cacheline boundary.",
"Data_LA": "1",
"EventCode": "0xD0",
"EventName": "MEM_UOPS_RETIRED.SPLIT_STORES",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts line-splitted store uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
+ "PublicDescription": "This event counts line-splitted store uops retired to the architected path. A line split is across 64B cache-line which includes a page split (4K).",
"SampleAfterValue": "100003",
"UMask": "0x42"
},
{
- "BriefDescription": "Retired load uops that miss the STLB. (Precise Event - PEBS)",
+ "BriefDescription": "Retired load uops that miss the STLB.",
"Data_LA": "1",
"EventCode": "0xD0",
"EventName": "MEM_UOPS_RETIRED.STLB_MISS_LOADS",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts load uops with true STLB miss retired to the architected path. True STLB miss is an uop triggering page walk that gets completed without blocks, and later gets retired. This page walk can end up with or without a fault.",
+ "PublicDescription": "This event counts load uops with true STLB miss retired to the architected path. True STLB miss is an uop triggering page walk that gets completed without blocks, and later gets retired. This page walk can end up with or without a fault.",
"SampleAfterValue": "100003",
"UMask": "0x11"
},
{
- "BriefDescription": "Retired store uops that miss the STLB. (Precise Event - PEBS)",
+ "BriefDescription": "Retired store uops that miss the STLB.",
"Data_LA": "1",
"EventCode": "0xD0",
"EventName": "MEM_UOPS_RETIRED.STLB_MISS_STORES",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts store uops true STLB miss retired to the architected path. True STLB miss is an uop triggering page walk that gets completed without blocks, and later gets retired. This page walk can end up with or without a fault.",
+ "PublicDescription": "This event counts store uops with true STLB miss retired to the architected path. True STLB miss is an uop triggering page walk that gets completed without blocks, and later gets retired. This page walk can end up with or without a fault.",
"SampleAfterValue": "100003",
"UMask": "0x12"
},
@@ -532,10 +533,18 @@
"UMask": "0x8"
},
{
- "BriefDescription": "Cacheable and noncachaeble code read requests",
+ "BriefDescription": "Any memory transaction that reached the SQ.",
+ "EventCode": "0xb0",
+ "EventName": "OFFCORE_REQUESTS.ALL_REQUESTS",
+ "PublicDescription": "This event counts memory transactions reached the super queue including requests initiated by the core, all L3 prefetches, page walks, and so on.",
+ "SampleAfterValue": "100003",
+ "UMask": "0x80"
+ },
+ {
+ "BriefDescription": "Cacheable and non-cacheable code read requests",
"EventCode": "0xB0",
"EventName": "OFFCORE_REQUESTS.DEMAND_CODE_RD",
- "PublicDescription": "This event counts both cacheable and noncachaeble code read requests.",
+ "PublicDescription": "This event counts both cacheable and non-cacheable code read requests.",
"SampleAfterValue": "100003",
"UMask": "0x2"
},
diff --git a/tools/perf/pmu-events/arch/x86/broadwellde/floating-point.json b/tools/perf/pmu-events/arch/x86/broadwellde/floating-point.json
index 0b3f026158e2..e4826dc7f797 100644
--- a/tools/perf/pmu-events/arch/x86/broadwellde/floating-point.json
+++ b/tools/perf/pmu-events/arch/x86/broadwellde/floating-point.json
@@ -1,70 +1,77 @@
[
{
- "BriefDescription": "Number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired. Each count represents 2 computations. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
- "EventCode": "0xC7",
+ "BriefDescription": "Number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 2 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+ "EventCode": "0xc7",
"EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE",
+ "PublicDescription": "Number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 2 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
"SampleAfterValue": "2000003",
"UMask": "0x4"
},
{
- "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired. Each count represents 4 computations. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
- "EventCode": "0xC7",
+ "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 4 calculations per element.",
+ "EventCode": "0xc7",
"EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE",
+ "PublicDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
"SampleAfterValue": "2000003",
"UMask": "0x8"
},
{
- "BriefDescription": "Number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired. Each count represents 4 computations. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
- "EventCode": "0xC7",
+ "BriefDescription": "Number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 4 calculations per element.",
+ "EventCode": "0xc7",
"EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE",
+ "PublicDescription": "Number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
"SampleAfterValue": "2000003",
"UMask": "0x10"
},
{
- "BriefDescription": "Number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired. Each count represents 8 computations. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
+ "BriefDescription": "Number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 8 calculations per element.",
"EventCode": "0xc7",
"EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE",
+ "PublicDescription": "Number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
"SampleAfterValue": "2000003",
"UMask": "0x20"
},
{
- "BriefDescription": "Number of SSE/AVX computational double precision floating-point instructions retired. Applies to SSE* and AVX*scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element. ?.",
- "EventCode": "0xC7",
+ "BriefDescription": "Number of SSE/AVX computational double precision floating-point instructions retired; some instructions will count twice as noted below. Applies to SSE* and AVX* scalar and packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
+ "EventCode": "0xc7",
"EventName": "FP_ARITH_INST_RETIRED.DOUBLE",
"SampleAfterValue": "2000006",
"UMask": "0x15"
},
{
- "BriefDescription": "Number of SSE/AVX computational packed floating-point instructions retired. Applies to SSE* and AVX*, packed, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RSQRT RCP SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
- "EventCode": "0xC7",
+ "BriefDescription": "Number of SSE/AVX computational packed floating-point instructions retired; some instructions will count twice as noted below. Applies to SSE* and AVX* packed double and single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
+ "EventCode": "0xc7",
"EventName": "FP_ARITH_INST_RETIRED.PACKED",
"SampleAfterValue": "2000004",
"UMask": "0x3c"
},
{
- "BriefDescription": "Number of SSE/AVX computational scalar floating-point instructions retired. Applies to SSE* and AVX* scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RSQRT RCP SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
- "EventCode": "0xC7",
+ "BriefDescription": "Number of SSE/AVX computational scalar floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computation operation. Applies to SSE* and AVX* scalar double and single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
+ "EventCode": "0xc7",
"EventName": "FP_ARITH_INST_RETIRED.SCALAR",
+ "PublicDescription": "Number of SSE/AVX computational scalar single precision and double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
"SampleAfterValue": "2000003",
"UMask": "0x3"
},
{
- "BriefDescription": "Number of SSE/AVX computational scalar double precision floating-point instructions retired. Each count represents 1 computation. Applies to SSE* and AVX* scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
- "EventCode": "0xC7",
+ "BriefDescription": "Number of SSE/AVX computational scalar double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
+ "EventCode": "0xc7",
"EventName": "FP_ARITH_INST_RETIRED.SCALAR_DOUBLE",
+ "PublicDescription": "Number of SSE/AVX computational scalar double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
"SampleAfterValue": "2000003",
"UMask": "0x1"
},
{
- "BriefDescription": "Number of SSE/AVX computational scalar single precision floating-point instructions retired. Each count represents 1 computation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
- "EventCode": "0xC7",
+ "BriefDescription": "Number of SSE/AVX computational scalar single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
+ "EventCode": "0xc7",
"EventName": "FP_ARITH_INST_RETIRED.SCALAR_SINGLE",
+ "PublicDescription": "Number of SSE/AVX computational scalar single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
"SampleAfterValue": "2000003",
"UMask": "0x2"
},
{
- "BriefDescription": "Number of SSE/AVX computational single precision floating-point instructions retired. Applies to SSE* and AVX*scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RCP RSQRT SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element. ?.",
- "EventCode": "0xC7",
+ "BriefDescription": "Number of SSE/AVX computational single precision floating-point instructions retired; some instructions will count twice as noted below. Applies to SSE* and AVX* scalar and packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
+ "EventCode": "0xc7",
"EventName": "FP_ARITH_INST_RETIRED.SINGLE",
"SampleAfterValue": "2000005",
"UMask": "0x2a"
diff --git a/tools/perf/pmu-events/arch/x86/broadwellde/frontend.json b/tools/perf/pmu-events/arch/x86/broadwellde/frontend.json
index d0f6678609ae..bd5da39564e1 100644
--- a/tools/perf/pmu-events/arch/x86/broadwellde/frontend.json
+++ b/tools/perf/pmu-events/arch/x86/broadwellde/frontend.json
@@ -125,16 +125,16 @@
"UMask": "0x4"
},
{
- "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+ "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy",
"CounterMask": "1",
"EventCode": "0x79",
"EventName": "IDQ.MS_CYCLES",
- "PublicDescription": "This event counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) while the Microcode Sequenser (MS) is busy. Counting includes uops that may bypass the IDQ. Uops maybe initiated by Decode Stream Buffer (DSB) or MITE.",
+ "PublicDescription": "This event counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) while the Microcode Sequencer (MS) is busy. Counting includes uops that may bypass the IDQ. Uops maybe initiated by Decode Stream Buffer (DSB) or MITE.",
"SampleAfterValue": "2000003",
"UMask": "0x30"
},
{
- "BriefDescription": "Cycles when uops initiated by Decode Stream Buffer (DSB) are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+ "BriefDescription": "Cycles when uops initiated by Decode Stream Buffer (DSB) are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy",
"CounterMask": "1",
"EventCode": "0x79",
"EventName": "IDQ.MS_DSB_CYCLES",
@@ -143,7 +143,7 @@
"UMask": "0x10"
},
{
- "BriefDescription": "Deliveries to Instruction Decode Queue (IDQ) initiated by Decode Stream Buffer (DSB) while Microcode Sequenser (MS) is busy",
+ "BriefDescription": "Deliveries to Instruction Decode Queue (IDQ) initiated by Decode Stream Buffer (DSB) while Microcode Sequencer (MS) is busy",
"CounterMask": "1",
"EdgeDetect": "1",
"EventCode": "0x79",
@@ -153,7 +153,7 @@
"UMask": "0x10"
},
{
- "BriefDescription": "Uops initiated by Decode Stream Buffer (DSB) that are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+ "BriefDescription": "Uops initiated by Decode Stream Buffer (DSB) that are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy",
"EventCode": "0x79",
"EventName": "IDQ.MS_DSB_UOPS",
"PublicDescription": "This event counts the number of uops initiated by Decode Stream Buffer (DSB) that are being delivered to Instruction Decode Queue (IDQ) while the Microcode Sequencer (MS) is busy. Counting includes uops that may bypass the IDQ.",
@@ -161,10 +161,10 @@
"UMask": "0x10"
},
{
- "BriefDescription": "Uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+ "BriefDescription": "Uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy",
"EventCode": "0x79",
"EventName": "IDQ.MS_MITE_UOPS",
- "PublicDescription": "This event counts the number of uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while the Microcode Sequenser (MS) is busy. Counting includes uops that may bypass the IDQ.",
+ "PublicDescription": "This event counts the number of uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while the Microcode Sequencer (MS) is busy. Counting includes uops that may bypass the IDQ.",
"SampleAfterValue": "2000003",
"UMask": "0x20"
},
@@ -178,10 +178,10 @@
"UMask": "0x30"
},
{
- "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+ "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) while Microcode Sequencer (MS) is busy",
"EventCode": "0x79",
"EventName": "IDQ.MS_UOPS",
- "PublicDescription": "This event counts the total number of uops delivered to Instruction Decode Queue (IDQ) while the Microcode Sequenser (MS) is busy. Counting includes uops that may bypass the IDQ. Uops maybe initiated by Decode Stream Buffer (DSB) or MITE.",
+ "PublicDescription": "This event counts the total number of uops delivered to Instruction Decode Queue (IDQ) while the Microcode Sequencer (MS) is busy. Counting includes uops that may bypass the IDQ. Uops maybe initiated by Decode Stream Buffer (DSB) or MITE.",
"SampleAfterValue": "2000003",
"UMask": "0x30"
},
diff --git a/tools/perf/pmu-events/arch/x86/broadwellde/memory.json b/tools/perf/pmu-events/arch/x86/broadwellde/memory.json
index 12cc384d7f18..041b6ff4062e 100644
--- a/tools/perf/pmu-events/arch/x86/broadwellde/memory.json
+++ b/tools/perf/pmu-events/arch/x86/broadwellde/memory.json
@@ -1,10 +1,10 @@
[
{
- "BriefDescription": "Number of times HLE abort was triggered (PEBS)",
+ "BriefDescription": "Number of times HLE abort was triggered",
"EventCode": "0xc8",
"EventName": "HLE_RETIRED.ABORTED",
"PEBS": "1",
- "PublicDescription": "Number of times HLE abort was triggered (PEBS).",
+ "PublicDescription": "Number of times HLE abort was triggered.",
"SampleAfterValue": "2000003",
"UMask": "0x4"
},
@@ -73,98 +73,106 @@
"UMask": "0x2"
},
{
- "BriefDescription": "Loads with latency value being above 128",
+ "BriefDescription": "Randomly selected loads with latency value being above 128",
+ "Data_LA": "1",
"Errata": "BDM100, BDM35",
- "EventCode": "0xCD",
+ "EventCode": "0xcd",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_128",
"MSRIndex": "0x3F6",
"MSRValue": "0x80",
"PEBS": "2",
- "PublicDescription": "This event counts loads with latency value being above 128.",
+ "PublicDescription": "Counts randomly selected loads with latency value being above 128.",
"SampleAfterValue": "1009",
"UMask": "0x1"
},
{
- "BriefDescription": "Loads with latency value being above 16",
+ "BriefDescription": "Randomly selected loads with latency value being above 16",
+ "Data_LA": "1",
"Errata": "BDM100, BDM35",
- "EventCode": "0xCD",
+ "EventCode": "0xcd",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_16",
"MSRIndex": "0x3F6",
"MSRValue": "0x10",
"PEBS": "2",
- "PublicDescription": "This event counts loads with latency value being above 16.",
+ "PublicDescription": "Counts randomly selected loads with latency value being above 16.",
"SampleAfterValue": "20011",
"UMask": "0x1"
},
{
- "BriefDescription": "Loads with latency value being above 256",
+ "BriefDescription": "Randomly selected loads with latency value being above 256",
+ "Data_LA": "1",
"Errata": "BDM100, BDM35",
- "EventCode": "0xCD",
+ "EventCode": "0xcd",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_256",
"MSRIndex": "0x3F6",
"MSRValue": "0x100",
"PEBS": "2",
- "PublicDescription": "This event counts loads with latency value being above 256.",
+ "PublicDescription": "Counts randomly selected loads with latency value being above 256.",
"SampleAfterValue": "503",
"UMask": "0x1"
},
{
- "BriefDescription": "Loads with latency value being above 32",
+ "BriefDescription": "Randomly selected loads with latency value being above 32",
+ "Data_LA": "1",
"Errata": "BDM100, BDM35",
- "EventCode": "0xCD",
+ "EventCode": "0xcd",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_32",
"MSRIndex": "0x3F6",
"MSRValue": "0x20",
"PEBS": "2",
- "PublicDescription": "This event counts loads with latency value being above 32.",
+ "PublicDescription": "Counts randomly selected loads with latency value being above 32.",
"SampleAfterValue": "100007",
"UMask": "0x1"
},
{
- "BriefDescription": "Loads with latency value being above 4",
+ "BriefDescription": "Randomly selected loads with latency value being above 4",
+ "Data_LA": "1",
"Errata": "BDM100, BDM35",
- "EventCode": "0xCD",
+ "EventCode": "0xcd",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_4",
"MSRIndex": "0x3F6",
"MSRValue": "0x4",
"PEBS": "2",
- "PublicDescription": "This event counts loads with latency value being above four.",
+ "PublicDescription": "Counts randomly selected loads with latency value being above four.",
"SampleAfterValue": "100003",
"UMask": "0x1"
},
{
- "BriefDescription": "Loads with latency value being above 512",
+ "BriefDescription": "Randomly selected loads with latency value being above 512",
+ "Data_LA": "1",
"Errata": "BDM100, BDM35",
- "EventCode": "0xCD",
+ "EventCode": "0xcd",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_512",
"MSRIndex": "0x3F6",
"MSRValue": "0x200",
"PEBS": "2",
- "PublicDescription": "This event counts loads with latency value being above 512.",
+ "PublicDescription": "Counts randomly selected loads with latency value being above 512.",
"SampleAfterValue": "101",
"UMask": "0x1"
},
{
- "BriefDescription": "Loads with latency value being above 64",
+ "BriefDescription": "Randomly selected loads with latency value being above 64",
+ "Data_LA": "1",
"Errata": "BDM100, BDM35",
- "EventCode": "0xCD",
+ "EventCode": "0xcd",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_64",
"MSRIndex": "0x3F6",
"MSRValue": "0x40",
"PEBS": "2",
- "PublicDescription": "This event counts loads with latency value being above 64.",
+ "PublicDescription": "Counts randomly selected loads with latency value being above 64.",
"SampleAfterValue": "2003",
"UMask": "0x1"
},
{
- "BriefDescription": "Loads with latency value being above 8",
+ "BriefDescription": "Randomly selected loads with latency value being above 8",
+ "Data_LA": "1",
"Errata": "BDM100, BDM35",
- "EventCode": "0xCD",
+ "EventCode": "0xcd",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_8",
"MSRIndex": "0x3F6",
"MSRValue": "0x8",
"PEBS": "2",
- "PublicDescription": "This event counts loads with latency value being above eight.",
+ "PublicDescription": "Counts randomly selected loads with latency value being above eight.",
"SampleAfterValue": "50021",
"UMask": "0x1"
},
@@ -185,11 +193,11 @@
"UMask": "0x2"
},
{
- "BriefDescription": "Number of times RTM abort was triggered (PEBS)",
+ "BriefDescription": "Number of times RTM abort was triggered",
"EventCode": "0xc9",
"EventName": "RTM_RETIRED.ABORTED",
"PEBS": "1",
- "PublicDescription": "Number of times RTM abort was triggered (PEBS).",
+ "PublicDescription": "Number of times RTM abort was triggered .",
"SampleAfterValue": "2000003",
"UMask": "0x4"
},
diff --git a/tools/perf/pmu-events/arch/x86/broadwellde/pipeline.json b/tools/perf/pmu-events/arch/x86/broadwellde/pipeline.json
index 9e7d66b07f01..9a902d2160e6 100644
--- a/tools/perf/pmu-events/arch/x86/broadwellde/pipeline.json
+++ b/tools/perf/pmu-events/arch/x86/broadwellde/pipeline.json
@@ -129,11 +129,11 @@
"UMask": "0x4"
},
{
- "BriefDescription": "Conditional branch instructions retired. (Precise Event - PEBS)",
+ "BriefDescription": "Conditional branch instructions retired.",
"EventCode": "0xC4",
"EventName": "BR_INST_RETIRED.CONDITIONAL",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts conditional branch instructions retired.",
+ "PublicDescription": "This event counts conditional branch instructions retired.",
"SampleAfterValue": "400009",
"UMask": "0x1"
},
@@ -147,38 +147,38 @@
"UMask": "0x40"
},
{
- "BriefDescription": "Direct and indirect near call instructions retired. (Precise Event - PEBS)",
+ "BriefDescription": "Direct and indirect near call instructions retired.",
"EventCode": "0xC4",
"EventName": "BR_INST_RETIRED.NEAR_CALL",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts both direct and indirect near call instructions retired.",
+ "PublicDescription": "This event counts both direct and indirect near call instructions retired.",
"SampleAfterValue": "100007",
"UMask": "0x2"
},
{
- "BriefDescription": "Direct and indirect macro near call instructions retired (captured in ring 3). (Precise Event - PEBS)",
+ "BriefDescription": "Direct and indirect macro near call instructions retired (captured in ring 3).",
"EventCode": "0xC4",
"EventName": "BR_INST_RETIRED.NEAR_CALL_R3",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts both direct and indirect macro near call instructions retired (captured in ring 3).",
+ "PublicDescription": "This event counts both direct and indirect macro near call instructions retired (captured in ring 3).",
"SampleAfterValue": "100007",
"UMask": "0x2"
},
{
- "BriefDescription": "Return instructions retired. (Precise Event - PEBS)",
+ "BriefDescription": "Return instructions retired.",
"EventCode": "0xC4",
"EventName": "BR_INST_RETIRED.NEAR_RETURN",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts return instructions retired.",
+ "PublicDescription": "This event counts return instructions retired.",
"SampleAfterValue": "100007",
"UMask": "0x8"
},
{
- "BriefDescription": "Taken branch instructions retired. (Precise Event - PEBS)",
+ "BriefDescription": "Taken branch instructions retired.",
"EventCode": "0xC4",
"EventName": "BR_INST_RETIRED.NEAR_TAKEN",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts taken branch instructions retired.",
+ "PublicDescription": "This event counts taken branch instructions retired.",
"SampleAfterValue": "400009",
"UMask": "0x20"
},
@@ -214,6 +214,14 @@
"SampleAfterValue": "200003",
"UMask": "0xc4"
},
+ {
+ "BriefDescription": "Speculative mispredicted indirect branches",
+ "EventCode": "0x89",
+ "EventName": "BR_MISP_EXEC.INDIRECT",
+ "PublicDescription": "Counts speculatively miss-predicted indirect branches at execution time. Counts for indirect near CALL or JMP instructions (RET excluded).",
+ "SampleAfterValue": "200003",
+ "UMask": "0xe4"
+ },
{
"BriefDescription": "Not taken speculative and retired mispredicted macro conditional branches",
"EventCode": "0x89",
@@ -270,29 +278,29 @@
"UMask": "0x4"
},
{
- "BriefDescription": "Mispredicted conditional branch instructions retired. (Precise Event - PEBS)",
+ "BriefDescription": "Mispredicted conditional branch instructions retired.",
"EventCode": "0xC5",
"EventName": "BR_MISP_RETIRED.CONDITIONAL",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts mispredicted conditional branch instructions retired.",
+ "PublicDescription": "This event counts mispredicted conditional branch instructions retired.",
"SampleAfterValue": "400009",
"UMask": "0x1"
},
{
- "BriefDescription": "number of near branch instructions retired that were mispredicted and taken. (Precise Event - PEBS).",
+ "BriefDescription": "number of near branch instructions retired that were mispredicted and taken.",
"EventCode": "0xC5",
"EventName": "BR_MISP_RETIRED.NEAR_TAKEN",
"PEBS": "1",
- "PublicDescription": "Number of near branch instructions retired that were mispredicted and taken. (Precise Event - PEBS).",
+ "PublicDescription": "Number of near branch instructions retired that were mispredicted and taken.",
"SampleAfterValue": "400009",
"UMask": "0x20"
},
{
- "BriefDescription": "This event counts the number of mispredicted ret instructions retired.(Precise Event)",
+ "BriefDescription": "This event counts the number of mispredicted ret instructions retired. Non PEBS",
"EventCode": "0xC5",
"EventName": "BR_MISP_RETIRED.RET",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts mispredicted return instructions retired.",
+ "PublicDescription": "This event counts mispredicted return instructions retired.",
"SampleAfterValue": "100007",
"UMask": "0x8"
},
@@ -300,7 +308,7 @@
"BriefDescription": "Count XClk pulses when this thread is unhalted and the other thread is halted.",
"EventCode": "0x3c",
"EventName": "CPU_CLK_THREAD_UNHALTED.ONE_THREAD_ACTIVE",
- "SampleAfterValue": "2000003",
+ "SampleAfterValue": "100003",
"UMask": "0x2"
},
{
@@ -308,7 +316,7 @@
"EventCode": "0x3C",
"EventName": "CPU_CLK_THREAD_UNHALTED.REF_XCLK",
"PublicDescription": "This is a fixed-frequency event programmed to general counters. It counts when the core is unhalted at 100 Mhz.",
- "SampleAfterValue": "2000003",
+ "SampleAfterValue": "100003",
"UMask": "0x1"
},
{
@@ -316,14 +324,14 @@
"BriefDescription": "Reference cycles when the at least one thread on the physical core is unhalted (counts at 100 MHz rate).",
"EventCode": "0x3C",
"EventName": "CPU_CLK_THREAD_UNHALTED.REF_XCLK_ANY",
- "SampleAfterValue": "2000003",
+ "SampleAfterValue": "100003",
"UMask": "0x1"
},
{
"BriefDescription": "Count XClk pulses when this thread is unhalted and the other thread is halted.",
"EventCode": "0x3C",
"EventName": "CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE",
- "SampleAfterValue": "2000003",
+ "SampleAfterValue": "100003",
"UMask": "0x2"
},
{
@@ -338,7 +346,7 @@
"EventCode": "0x3C",
"EventName": "CPU_CLK_UNHALTED.REF_XCLK",
"PublicDescription": "Reference cycles when the thread is unhalted (counts at 100 MHz rate).",
- "SampleAfterValue": "2000003",
+ "SampleAfterValue": "100003",
"UMask": "0x1"
},
{
@@ -346,7 +354,7 @@
"BriefDescription": "Reference cycles when the at least one thread on the physical core is unhalted (counts at 100 MHz rate).",
"EventCode": "0x3C",
"EventName": "CPU_CLK_UNHALTED.REF_XCLK_ANY",
- "SampleAfterValue": "2000003",
+ "SampleAfterValue": "100003",
"UMask": "0x1"
},
{
@@ -500,7 +508,7 @@
"BriefDescription": "Stalls caused by changing prefix length of the instruction.",
"EventCode": "0x87",
"EventName": "ILD_STALL.LCP",
- "PublicDescription": "This event counts stalls occured due to changing prefix length (66, 67 or REX.W when they change the length of the decoded instruction). Occurrences counting is proportional to the number of prefixes in a 16B-line. This may result in the following penalties: three-cycle penalty for each LCP in a 16-byte chunk.",
+ "PublicDescription": "This event counts stalls occurred due to changing prefix length (66, 67 or REX.W when they change the length of the decoded instruction). Occurrences counting is proportional to the number of prefixes in a 16B-line. This may result in the following penalties: three-cycle penalty for each LCP in a 16-byte chunk.",
"SampleAfterValue": "2000003",
"UMask": "0x1"
},
@@ -681,9 +689,9 @@
},
{
"BriefDescription": "Resource-related stall cycles",
- "EventCode": "0xA2",
+ "EventCode": "0xa2",
"EventName": "RESOURCE_STALLS.ANY",
- "PublicDescription": "This event counts resource-related stall cycles. Reasons for stalls can be as follows:\n - *any* u-arch structure got full (LB, SB, RS, ROB, BOB, LM, Physical Register Reclaim Table (PRRT), or Physical History Table (PHT) slots)\n - *any* u-arch structure got empty (like INT/SIMD FreeLists)\n - FPU control word (FPCW), MXCSR\nand others. This counts cycles that the pipeline backend blocked uop delivery from the front end.",
+ "PublicDescription": "This event counts resource-related stall cycles.",
"SampleAfterValue": "2000003",
"UMask": "0x1"
},
@@ -909,7 +917,7 @@
},
{
"AnyThread": "1",
- "BriefDescription": "Cycles per core when uops are exectuted in port 0.",
+ "BriefDescription": "Cycles per core when uops are executed in port 0.",
"EventCode": "0xA1",
"EventName": "UOPS_EXECUTED_PORT.PORT_0_CORE",
"SampleAfterValue": "2000003",
@@ -925,7 +933,7 @@
},
{
"AnyThread": "1",
- "BriefDescription": "Cycles per core when uops are exectuted in port 1.",
+ "BriefDescription": "Cycles per core when uops are executed in port 1.",
"EventCode": "0xA1",
"EventName": "UOPS_EXECUTED_PORT.PORT_1_CORE",
"SampleAfterValue": "2000003",
@@ -973,7 +981,7 @@
},
{
"AnyThread": "1",
- "BriefDescription": "Cycles per core when uops are exectuted in port 4.",
+ "BriefDescription": "Cycles per core when uops are executed in port 4.",
"EventCode": "0xA1",
"EventName": "UOPS_EXECUTED_PORT.PORT_4_CORE",
"SampleAfterValue": "2000003",
@@ -989,7 +997,7 @@
},
{
"AnyThread": "1",
- "BriefDescription": "Cycles per core when uops are exectuted in port 5.",
+ "BriefDescription": "Cycles per core when uops are executed in port 5.",
"EventCode": "0xA1",
"EventName": "UOPS_EXECUTED_PORT.PORT_5_CORE",
"SampleAfterValue": "2000003",
@@ -1005,7 +1013,7 @@
},
{
"AnyThread": "1",
- "BriefDescription": "Cycles per core when uops are exectuted in port 6.",
+ "BriefDescription": "Cycles per core when uops are executed in port 6.",
"EventCode": "0xA1",
"EventName": "UOPS_EXECUTED_PORT.PORT_6_CORE",
"SampleAfterValue": "2000003",
@@ -1068,21 +1076,20 @@
"UMask": "0x1"
},
{
- "BriefDescription": "Actually retired uops. (Precise Event - PEBS)",
- "Data_LA": "1",
+ "BriefDescription": "Actually retired uops.",
"EventCode": "0xC2",
"EventName": "UOPS_RETIRED.ALL",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts all actually retired uops. Counting increments by two for micro-fused uops, and by one for macro-fused and other uops. Maximal increment value for one cycle is eight.",
+ "PublicDescription": "This event counts all actually retired uops. Counting increments by two for micro-fused uops, and by one for macro-fused and other uops. Maximal increment value for one cycle is eight.",
"SampleAfterValue": "2000003",
"UMask": "0x1"
},
{
- "BriefDescription": "Retirement slots used. (Precise Event - PEBS)",
+ "BriefDescription": "Retirement slots used.",
"EventCode": "0xC2",
"EventName": "UOPS_RETIRED.RETIRE_SLOTS",
"PEBS": "1",
- "PublicDescription": "This is a precise version (that is, uses PEBS) of the event that counts the number of retirement slots used.",
+ "PublicDescription": "This event counts the number of retirement slots used.",
"SampleAfterValue": "2000003",
"UMask": "0x2"
},
@@ -1098,7 +1105,7 @@
},
{
"BriefDescription": "Cycles with less than 10 actually retired uops.",
- "CounterMask": "10",
+ "CounterMask": "16",
"EventCode": "0xC2",
"EventName": "UOPS_RETIRED.TOTAL_CYCLES",
"Invert": "1",
diff --git a/tools/perf/pmu-events/arch/x86/broadwellde/uncore-cache.json b/tools/perf/pmu-events/arch/x86/broadwellde/uncore-cache.json
index b8c9845308b2..2bf23ef7bfac 100644
--- a/tools/perf/pmu-events/arch/x86/broadwellde/uncore-cache.json
+++ b/tools/perf/pmu-events/arch/x86/broadwellde/uncore-cache.json
@@ -78,7 +78,7 @@
"EventCode": "0x34",
"EventName": "UNC_C_LLC_LOOKUP.WRITE",
"PerPkg": "1",
- "PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set umask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:18] bits correspond to [FMESI] state.; Writeback transactions from L2 to the LLC This includes all write transactions -- both Cachable and UC.",
+ "PublicDescription": "Counts the number of times the LLC was accessed - this includes code, data, prefetches and hints coming from L2. This has numerous filters available. Note the non-standard filtering equation. This event will count requests that lookup the cache multiple times with multiple increments. One must ALWAYS set umask bit 0 and select a state or states to match. Otherwise, the event will count nothing. CBoGlCtrl[22:18] bits correspond to [FMESI] state.; Writeback transactions from L2 to the LLC This includes all write transactions -- both Cacheable and UC.",
"UMask": "0x5",
"Unit": "CBO"
},
@@ -968,7 +968,7 @@
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.ALL",
"PerPkg": "1",
- "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions inserted into the TOR. This includes requests that reside in the TOR for a short time, such as LLC Hits that do not need to snoop cores or requests that get rejected and have to be retried through one of the ingress queues. The TOR is more commonly a bottleneck in skews with smaller core counts, where the ratio of RTIDs to TOR entries is larger. Note that there are reserved TOR entries for various request types, so it is possible that a given request type be blocked with an occupancy that is less than 20. Also note that generally requests will not be able to arbitrate into the TOR pipeline if there are no available TOR slots.",
+ "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions inserted into the TOR. This includes requests that reside in the TOR for a short time, such as LLC Hits that do not need to snoop cores or requests that get rejected and have to be retried through one of the ingress queues. The TOR is more commonly a bottleneck in skews with smaller core counts, where the ratio of RTIDs to TOR entries is larger. Note that there are reserved TOR entries for various request types, so it is possible that a given request type be blocked with an occupancy that is less than 20. Also note that generally requests will not be able to arbitrate into the TOR pipeline if there are no available TOR slots.",
"UMask": "0x8",
"Unit": "CBO"
},
@@ -977,7 +977,7 @@
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.EVICTION",
"PerPkg": "1",
- "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Eviction transactions inserted into the TOR. Evictions can be quick, such as when the line is in the F, S, or E states and no core valid bits are set. They can also be longer if either CV bits are set (so the cores need to be snooped) and/or if there is a HitM (in which case it is necessary to write the request out to memory).",
+ "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Eviction transactions inserted into the TOR. Evictions can be quick, such as when the line is in the F, S, or E states and no core valid bits are set. They can also be longer if either CV bits are set (so the cores need to be snooped) and/or if there is a HitM (in which case it is necessary to write the request out to memory).",
"UMask": "0x4",
"Unit": "CBO"
},
@@ -986,7 +986,7 @@
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.LOCAL",
"PerPkg": "1",
- "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions inserted into the TOR that are satisifed by locally HOMed memory.",
+ "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions inserted into the TOR that are satisfied by locally HOMed memory.",
"UMask": "0x28",
"Unit": "CBO"
},
@@ -995,7 +995,7 @@
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.LOCAL_OPCODE",
"PerPkg": "1",
- "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions, satisifed by an opcode, inserted into the TOR that are satisifed by locally HOMed memory.",
+ "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions, satisfied by an opcode, inserted into the TOR that are satisfied by locally HOMed memory.",
"UMask": "0x21",
"Unit": "CBO"
},
@@ -1004,7 +1004,7 @@
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.MISS_LOCAL",
"PerPkg": "1",
- "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that are satisifed by locally HOMed memory.",
+ "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that are satisfied by locally HOMed memory.",
"UMask": "0x2a",
"Unit": "CBO"
},
@@ -1013,7 +1013,7 @@
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.MISS_LOCAL_OPCODE",
"PerPkg": "1",
- "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions, satisifed by an opcode, inserted into the TOR that are satisifed by locally HOMed memory.",
+ "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions, satisfied by an opcode, inserted into the TOR that are satisfied by locally HOMed memory.",
"UMask": "0x23",
"Unit": "CBO"
},
@@ -1022,7 +1022,7 @@
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.MISS_OPCODE",
"PerPkg": "1",
- "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that match an opcode.",
+ "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that match an opcode.",
"UMask": "0x3",
"Unit": "CBO"
},
@@ -1031,7 +1031,7 @@
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.MISS_REMOTE",
"PerPkg": "1",
- "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that are satisifed by remote caches or remote memory.",
+ "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that are satisfied by remote caches or remote memory.",
"UMask": "0x8a",
"Unit": "CBO"
},
@@ -1040,7 +1040,7 @@
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.MISS_REMOTE_OPCODE",
"PerPkg": "1",
- "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions, satisifed by an opcode, inserted into the TOR that are satisifed by remote caches or remote memory.",
+ "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions, satisfied by an opcode, inserted into the TOR that are satisfied by remote caches or remote memory.",
"UMask": "0x83",
"Unit": "CBO"
},
@@ -1049,7 +1049,7 @@
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_ALL",
"PerPkg": "1",
- "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All NID matched (matches an RTID destination) transactions inserted into the TOR. The NID is programmed in Cn_MSR_PMON_BOX_FILTER.nid. In conjunction with STATE = I, it is possible to monitor misses to specific NIDs in the system.",
+ "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All NID matched (matches an RTID destination) transactions inserted into the TOR. The NID is programmed in Cn_MSR_PMON_BOX_FILTER.nid. In conjunction with STATE = I, it is possible to monitor misses to specific NIDs in the system.",
"UMask": "0x48",
"Unit": "CBO"
},
@@ -1058,7 +1058,7 @@
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_EVICTION",
"PerPkg": "1",
- "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; NID matched eviction transactions inserted into the TOR.",
+ "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; NID matched eviction transactions inserted into the TOR.",
"UMask": "0x44",
"Unit": "CBO"
},
@@ -1067,7 +1067,7 @@
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_MISS_ALL",
"PerPkg": "1",
- "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All NID matched miss requests that were inserted into the TOR.",
+ "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All NID matched miss requests that were inserted into the TOR.",
"UMask": "0x4a",
"Unit": "CBO"
},
@@ -1076,7 +1076,7 @@
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_MISS_OPCODE",
"PerPkg": "1",
- "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that match a NID and an opcode.",
+ "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Miss transactions inserted into the TOR that match a NID and an opcode.",
"UMask": "0x43",
"Unit": "CBO"
},
@@ -1085,7 +1085,7 @@
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_OPCODE",
"PerPkg": "1",
- "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Transactions inserted into the TOR that match a NID and an opcode.",
+ "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Transactions inserted into the TOR that match a NID and an opcode.",
"UMask": "0x41",
"Unit": "CBO"
},
@@ -1094,7 +1094,7 @@
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.NID_WB",
"PerPkg": "1",
- "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; NID matched write transactions inserted into the TOR.",
+ "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; NID matched write transactions inserted into the TOR.",
"UMask": "0x50",
"Unit": "CBO"
},
@@ -1103,7 +1103,7 @@
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.OPCODE",
"PerPkg": "1",
- "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Transactions inserted into the TOR that match an opcode (matched by Cn_MSR_PMON_BOX_FILTER.opc)",
+ "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Transactions inserted into the TOR that match an opcode (matched by Cn_MSR_PMON_BOX_FILTER.opc)",
"UMask": "0x1",
"Unit": "CBO"
},
@@ -1112,7 +1112,7 @@
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.REMOTE",
"PerPkg": "1",
- "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions inserted into the TOR that are satisifed by remote caches or remote memory.",
+ "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions inserted into the TOR that are satisfied by remote caches or remote memory.",
"UMask": "0x88",
"Unit": "CBO"
},
@@ -1121,7 +1121,7 @@
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.REMOTE_OPCODE",
"PerPkg": "1",
- "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions, satisifed by an opcode, inserted into the TOR that are satisifed by remote caches or remote memory.",
+ "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; All transactions, satisfied by an opcode, inserted into the TOR that are satisfied by remote caches or remote memory.",
"UMask": "0x81",
"Unit": "CBO"
},
@@ -1130,7 +1130,7 @@
"EventCode": "0x35",
"EventName": "UNC_C_TOR_INSERTS.WB",
"PerPkg": "1",
- "PublicDescription": "Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Write transactions inserted into the TOR. This does not include RFO, but actual operations that contain data being sent from the core.",
+ "PublicDescription": "Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182).; Write transactions inserted into the TOR. This does not include RFO, but actual operations that contain data being sent from the core.",
"UMask": "0x10",
"Unit": "CBO"
},
@@ -1166,7 +1166,7 @@
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.LOCAL_OPCODE",
"PerPkg": "1",
- "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding transactions, satisifed by an opcode, in the TOR that are satisifed by locally HOMed memory.",
+ "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding transactions, satisfied by an opcode, in the TOR that are satisfied by locally HOMed memory.",
"UMask": "0x21",
"Unit": "CBO"
},
@@ -1193,7 +1193,7 @@
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.MISS_LOCAL_OPCODE",
"PerPkg": "1",
- "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss transactions, satisifed by an opcode, in the TOR that are satisifed by locally HOMed memory.",
+ "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss transactions, satisfied by an opcode, in the TOR that are satisfied by locally HOMed memory.",
"UMask": "0x23",
"Unit": "CBO"
},
@@ -1220,7 +1220,7 @@
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.MISS_REMOTE_OPCODE",
"PerPkg": "1",
- "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss transactions, satisifed by an opcode, in the TOR that are satisifed by remote caches or remote memory.",
+ "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding Miss transactions, satisfied by an opcode, in the TOR that are satisfied by remote caches or remote memory.",
"UMask": "0x83",
"Unit": "CBO"
},
@@ -1301,7 +1301,7 @@
"EventCode": "0x36",
"EventName": "UNC_C_TOR_OCCUPANCY.REMOTE_OPCODE",
"PerPkg": "1",
- "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding transactions, satisifed by an opcode, in the TOR that are satisifed by remote caches or remote memory.",
+ "PublicDescription": "For each cycle, this event accumulates the number of valid entries in the TOR that match qualifications specified by the subevent. There are a number of subevent 'filters' but only a subset of the subevent combinations are valid. Subevents that require an opcode or NID match require the Cn_MSR_PMON_BOX_FILTER.{opc, nid} field to be set. If, for example, one wanted to count DRD Local Misses, one should select MISS_OPC_MATCH and set Cn_MSR_PMON_BOX_FILTER.opc to DRD (0x182); Number of outstanding transactions, satisfied by an opcode, in the TOR that are satisfied by remote caches or remote memory.",
"UMask": "0x81",
"Unit": "CBO"
},
@@ -1388,7 +1388,7 @@
"EventCode": "0x2",
"EventName": "UNC_C_TxR_INSERTS.BL_CORE",
"PerPkg": "1",
- "PublicDescription": "Number of allocations into the Cbo Egress. The Egress is used to queue up requests destined for the ring.; Ring transactions from the Corebo destined for the BL ring. This is commonly used for transfering writeback data to the cache.",
+ "PublicDescription": "Number of allocations into the Cbo Egress. The Egress is used to queue up requests destined for the ring.; Ring transactions from the Corebo destined for the BL ring. This is commonly used for transferring writeback data to the cache.",
"UMask": "0x40",
"Unit": "CBO"
},
@@ -1535,7 +1535,7 @@
"EventCode": "0x41",
"EventName": "UNC_H_DIRECTORY_LAT_OPT",
"PerPkg": "1",
- "PublicDescription": "Directory Latency Optimization Data Return Path Taken. When directory mode is enabled and the directory retuned for a read is Dir=I, then data can be returned using a faster path if certain conditions are met (credits, free pipeline, etc).",
+ "PublicDescription": "Directory Latency Optimization Data Return Path Taken. When directory mode is enabled and the directory returned for a read is Dir=I, then data can be returned using a faster path if certain conditions are met (credits, free pipeline, etc).",
"Unit": "HA"
},
{
@@ -2647,7 +2647,7 @@
"EventCode": "0x21",
"EventName": "UNC_H_SNOOP_RESP.RSPSFWD",
"PerPkg": "1",
- "PublicDescription": "Counts the total number of RspI snoop responses received. Whenever a snoops are issued, one or more snoop responses will be returned depending on the topology of the system. In systems larger than 2s, when multiple snoops are returned this will count all the snoops that are received. For example, if 3 snoops were issued and returned RspI, RspS, and RspSFwd; then each of these sub-events would increment by 1.; Filters for a snoop response of RspSFwd. This is returned when a remote caching agent forwards data but holds on to its currentl copy. This is common for data and code reads that hit in a remote socket in E or F state.",
+ "PublicDescription": "Counts the total number of RspI snoop responses received. Whenever a snoops are issued, one or more snoop responses will be returned depending on the topology of the system. In systems larger than 2s, when multiple snoops are returned this will count all the snoops that are received. For example, if 3 snoops were issued and returned RspI, RspS, and RspSFwd; then each of these sub-events would increment by 1.; Filters for a snoop response of RspSFwd. This is returned when a remote caching agent forwards data but holds on to its current copy. This is common for data and code reads that hit in a remote socket in E or F state.",
"UMask": "0x8",
"Unit": "HA"
},
@@ -2719,7 +2719,7 @@
"EventCode": "0x60",
"EventName": "UNC_H_SNP_RESP_RECV_LOCAL.RSPSFWD",
"PerPkg": "1",
- "PublicDescription": "Number of snoop responses received for a Local request; Filters for a snoop response of RspSFwd. This is returned when a remote caching agent forwards data but holds on to its currentl copy. This is common for data and code reads that hit in a remote socket in E or F state.",
+ "PublicDescription": "Number of snoop responses received for a Local request; Filters for a snoop response of RspSFwd. This is returned when a remote caching agent forwards data but holds on to its current copy. This is common for data and code reads that hit in a remote socket in E or F state.",
"UMask": "0x8",
"Unit": "HA"
},
@@ -2931,7 +2931,7 @@
"Unit": "HA"
},
{
- "BriefDescription": "Tracker Occupancy Accumultor; Local InvItoE Requests",
+ "BriefDescription": "Tracker Occupancy Accumulator; Local InvItoE Requests",
"EventCode": "0x4",
"EventName": "UNC_H_TRACKER_OCCUPANCY.INVITOE_LOCAL",
"PerPkg": "1",
@@ -2940,7 +2940,7 @@
"Unit": "HA"
},
{
- "BriefDescription": "Tracker Occupancy Accumultor; Remote InvItoE Requests",
+ "BriefDescription": "Tracker Occupancy Accumulator; Remote InvItoE Requests",
"EventCode": "0x4",
"EventName": "UNC_H_TRACKER_OCCUPANCY.INVITOE_REMOTE",
"PerPkg": "1",
@@ -2949,7 +2949,7 @@
"Unit": "HA"
},
{
- "BriefDescription": "Tracker Occupancy Accumultor; Local Read Requests",
+ "BriefDescription": "Tracker Occupancy Accumulator; Local Read Requests",
"EventCode": "0x4",
"EventName": "UNC_H_TRACKER_OCCUPANCY.READS_LOCAL",
"PerPkg": "1",
@@ -2958,7 +2958,7 @@
"Unit": "HA"
},
{
- "BriefDescription": "Tracker Occupancy Accumultor; Remote Read Requests",
+ "BriefDescription": "Tracker Occupancy Accumulator; Remote Read Requests",
"EventCode": "0x4",
"EventName": "UNC_H_TRACKER_OCCUPANCY.READS_REMOTE",
"PerPkg": "1",
@@ -2967,7 +2967,7 @@
"Unit": "HA"
},
{
- "BriefDescription": "Tracker Occupancy Accumultor; Local Write Requests",
+ "BriefDescription": "Tracker Occupancy Accumulator; Local Write Requests",
"EventCode": "0x4",
"EventName": "UNC_H_TRACKER_OCCUPANCY.WRITES_LOCAL",
"PerPkg": "1",
@@ -2976,7 +2976,7 @@
"Unit": "HA"
},
{
- "BriefDescription": "Tracker Occupancy Accumultor; Remote Write Requests",
+ "BriefDescription": "Tracker Occupancy Accumulator; Remote Write Requests",
"EventCode": "0x4",
"EventName": "UNC_H_TRACKER_OCCUPANCY.WRITES_REMOTE",
"PerPkg": "1",
@@ -2985,7 +2985,7 @@
"Unit": "HA"
},
{
- "BriefDescription": "Data Pending Occupancy Accumultor; Local Requests",
+ "BriefDescription": "Data Pending Occupancy Accumulator; Local Requests",
"EventCode": "0x5",
"EventName": "UNC_H_TRACKER_PENDING_OCCUPANCY.LOCAL",
"PerPkg": "1",
@@ -2994,7 +2994,7 @@
"Unit": "HA"
},
{
- "BriefDescription": "Data Pending Occupancy Accumultor; Remote Requests",
+ "BriefDescription": "Data Pending Occupancy Accumulator; Remote Requests",
"EventCode": "0x5",
"EventName": "UNC_H_TRACKER_PENDING_OCCUPANCY.REMOTE",
"PerPkg": "1",
diff --git a/tools/perf/pmu-events/arch/x86/broadwellde/uncore-memory.json b/tools/perf/pmu-events/arch/x86/broadwellde/uncore-memory.json
index c3f2f6c2ac74..a764234a3584 100644
--- a/tools/perf/pmu-events/arch/x86/broadwellde/uncore-memory.json
+++ b/tools/perf/pmu-events/arch/x86/broadwellde/uncore-memory.json
@@ -166,7 +166,7 @@
"EventCode": "0x9",
"EventName": "UNC_M_ECC_CORRECTABLE_ERRORS",
"PerPkg": "1",
- "PublicDescription": "Counts the number of ECC errors detected and corrected by the iMC on this channel. This counter is only useful with ECC DRAM devices. This count will increment one time for each correction regardless of the number of bits corrected. The iMC can correct up to 4 bit errors in independent channel mode and 8 bit erros in lockstep mode.",
+ "PublicDescription": "Counts the number of ECC errors detected and corrected by the iMC on this channel. This counter is only useful with ECC DRAM devices. This count will increment one time for each correction regardless of the number of bits corrected. The iMC can correct up to 4 bit errors in independent channel mode and 8 bit errors in lockstep mode.",
"Unit": "iMC"
},
{
@@ -302,6 +302,7 @@
"Unit": "iMC"
},
{
+ "BriefDescription": "UNC_M_POWER_PCU_THROTTLING",
"EventCode": "0x42",
"EventName": "UNC_M_POWER_PCU_THROTTLING",
"PerPkg": "1",
@@ -487,6 +488,7 @@
"EventCode": "0xB0",
"EventName": "UNC_M_RD_CAS_RANK0.ALLBANKS",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : All Banks",
"UMask": "0x10",
"Unit": "iMC"
},
@@ -495,6 +497,7 @@
"EventCode": "0xB0",
"EventName": "UNC_M_RD_CAS_RANK0.BANK0",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 0",
"Unit": "iMC"
},
{
@@ -502,6 +505,7 @@
"EventCode": "0xB0",
"EventName": "UNC_M_RD_CAS_RANK0.BANK1",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 1",
"UMask": "0x1",
"Unit": "iMC"
},
@@ -510,6 +514,7 @@
"EventCode": "0xB0",
"EventName": "UNC_M_RD_CAS_RANK0.BANK10",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 10",
"UMask": "0xa",
"Unit": "iMC"
},
@@ -518,6 +523,7 @@
"EventCode": "0xB0",
"EventName": "UNC_M_RD_CAS_RANK0.BANK11",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 11",
"UMask": "0xb",
"Unit": "iMC"
},
@@ -526,6 +532,7 @@
"EventCode": "0xB0",
"EventName": "UNC_M_RD_CAS_RANK0.BANK12",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 12",
"UMask": "0xc",
"Unit": "iMC"
},
@@ -534,6 +541,7 @@
"EventCode": "0xB0",
"EventName": "UNC_M_RD_CAS_RANK0.BANK13",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 13",
"UMask": "0xd",
"Unit": "iMC"
},
@@ -542,6 +550,7 @@
"EventCode": "0xB0",
"EventName": "UNC_M_RD_CAS_RANK0.BANK14",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 14",
"UMask": "0xe",
"Unit": "iMC"
},
@@ -550,6 +559,7 @@
"EventCode": "0xB0",
"EventName": "UNC_M_RD_CAS_RANK0.BANK15",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 15",
"UMask": "0xf",
"Unit": "iMC"
},
@@ -558,6 +568,7 @@
"EventCode": "0xB0",
"EventName": "UNC_M_RD_CAS_RANK0.BANK2",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 2",
"UMask": "0x2",
"Unit": "iMC"
},
@@ -566,6 +577,7 @@
"EventCode": "0xB0",
"EventName": "UNC_M_RD_CAS_RANK0.BANK3",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 3",
"UMask": "0x3",
"Unit": "iMC"
},
@@ -574,6 +586,7 @@
"EventCode": "0xB0",
"EventName": "UNC_M_RD_CAS_RANK0.BANK4",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 4",
"UMask": "0x4",
"Unit": "iMC"
},
@@ -582,6 +595,7 @@
"EventCode": "0xB0",
"EventName": "UNC_M_RD_CAS_RANK0.BANK5",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 5",
"UMask": "0x5",
"Unit": "iMC"
},
@@ -590,6 +604,7 @@
"EventCode": "0xB0",
"EventName": "UNC_M_RD_CAS_RANK0.BANK6",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 6",
"UMask": "0x6",
"Unit": "iMC"
},
@@ -598,6 +613,7 @@
"EventCode": "0xB0",
"EventName": "UNC_M_RD_CAS_RANK0.BANK7",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 7",
"UMask": "0x7",
"Unit": "iMC"
},
@@ -606,6 +622,7 @@
"EventCode": "0xB0",
"EventName": "UNC_M_RD_CAS_RANK0.BANK8",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 8",
"UMask": "0x8",
"Unit": "iMC"
},
@@ -614,6 +631,7 @@
"EventCode": "0xB0",
"EventName": "UNC_M_RD_CAS_RANK0.BANK9",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 9",
"UMask": "0x9",
"Unit": "iMC"
},
@@ -622,6 +640,7 @@
"EventCode": "0xB0",
"EventName": "UNC_M_RD_CAS_RANK0.BANKG0",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank Group 0 (Banks 0-3)",
"UMask": "0x11",
"Unit": "iMC"
},
@@ -630,6 +649,7 @@
"EventCode": "0xB0",
"EventName": "UNC_M_RD_CAS_RANK0.BANKG1",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank Group 1 (Banks 4-7)",
"UMask": "0x12",
"Unit": "iMC"
},
@@ -638,6 +658,7 @@
"EventCode": "0xB0",
"EventName": "UNC_M_RD_CAS_RANK0.BANKG2",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank Group 2 (Banks 8-11)",
"UMask": "0x13",
"Unit": "iMC"
},
@@ -646,6 +667,7 @@
"EventCode": "0xB0",
"EventName": "UNC_M_RD_CAS_RANK0.BANKG3",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank Group 3 (Banks 12-15)",
"UMask": "0x14",
"Unit": "iMC"
},
@@ -654,6 +676,7 @@
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.ALLBANKS",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : All Banks",
"UMask": "0x10",
"Unit": "iMC"
},
@@ -662,6 +685,7 @@
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANK0",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 0",
"Unit": "iMC"
},
{
@@ -669,6 +693,7 @@
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANK1",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 1",
"UMask": "0x1",
"Unit": "iMC"
},
@@ -677,6 +702,7 @@
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANK10",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 10",
"UMask": "0xa",
"Unit": "iMC"
},
@@ -685,6 +711,7 @@
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANK11",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 11",
"UMask": "0xb",
"Unit": "iMC"
},
@@ -693,6 +720,7 @@
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANK12",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 12",
"UMask": "0xc",
"Unit": "iMC"
},
@@ -701,6 +729,7 @@
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANK13",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 13",
"UMask": "0xd",
"Unit": "iMC"
},
@@ -709,6 +738,7 @@
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANK14",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 14",
"UMask": "0xe",
"Unit": "iMC"
},
@@ -717,6 +747,7 @@
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANK15",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 15",
"UMask": "0xf",
"Unit": "iMC"
},
@@ -725,6 +756,7 @@
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANK2",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 2",
"UMask": "0x2",
"Unit": "iMC"
},
@@ -733,6 +765,7 @@
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANK3",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 3",
"UMask": "0x3",
"Unit": "iMC"
},
@@ -741,6 +774,7 @@
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANK4",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 4",
"UMask": "0x4",
"Unit": "iMC"
},
@@ -749,6 +783,7 @@
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANK5",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 5",
"UMask": "0x5",
"Unit": "iMC"
},
@@ -757,6 +792,7 @@
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANK6",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 6",
"UMask": "0x6",
"Unit": "iMC"
},
@@ -765,6 +801,7 @@
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANK7",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 7",
"UMask": "0x7",
"Unit": "iMC"
},
@@ -773,6 +810,7 @@
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANK8",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 8",
"UMask": "0x8",
"Unit": "iMC"
},
@@ -781,6 +819,7 @@
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANK9",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 9",
"UMask": "0x9",
"Unit": "iMC"
},
@@ -789,6 +828,7 @@
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANKG0",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank Group 0 (Banks 0-3)",
"UMask": "0x11",
"Unit": "iMC"
},
@@ -797,6 +837,7 @@
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANKG1",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank Group 1 (Banks 4-7)",
"UMask": "0x12",
"Unit": "iMC"
},
@@ -805,6 +846,7 @@
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANKG2",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank Group 2 (Banks 8-11)",
"UMask": "0x13",
"Unit": "iMC"
},
@@ -813,6 +855,7 @@
"EventCode": "0xB1",
"EventName": "UNC_M_RD_CAS_RANK1.BANKG3",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank Group 3 (Banks 12-15)",
"UMask": "0x14",
"Unit": "iMC"
},
@@ -821,6 +864,7 @@
"EventCode": "0xB2",
"EventName": "UNC_M_RD_CAS_RANK2.BANK0",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 0",
"Unit": "iMC"
},
{
@@ -828,6 +872,7 @@
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.ALLBANKS",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : All Banks",
"UMask": "0x10",
"Unit": "iMC"
},
@@ -836,6 +881,7 @@
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANK0",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 0",
"Unit": "iMC"
},
{
@@ -843,6 +889,7 @@
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANK1",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 1",
"UMask": "0x1",
"Unit": "iMC"
},
@@ -851,6 +898,7 @@
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANK10",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 10",
"UMask": "0xa",
"Unit": "iMC"
},
@@ -859,6 +907,7 @@
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANK11",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 11",
"UMask": "0xb",
"Unit": "iMC"
},
@@ -867,6 +916,7 @@
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANK12",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 12",
"UMask": "0xc",
"Unit": "iMC"
},
@@ -875,6 +925,7 @@
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANK13",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 13",
"UMask": "0xd",
"Unit": "iMC"
},
@@ -883,6 +934,7 @@
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANK14",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 14",
"UMask": "0xe",
"Unit": "iMC"
},
@@ -891,6 +943,7 @@
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANK15",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 15",
"UMask": "0xf",
"Unit": "iMC"
},
@@ -899,6 +952,7 @@
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANK2",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 2",
"UMask": "0x2",
"Unit": "iMC"
},
@@ -907,6 +961,7 @@
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANK3",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 3",
"UMask": "0x3",
"Unit": "iMC"
},
@@ -915,6 +970,7 @@
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANK4",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 4",
"UMask": "0x4",
"Unit": "iMC"
},
@@ -923,6 +979,7 @@
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANK5",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 5",
"UMask": "0x5",
"Unit": "iMC"
},
@@ -931,6 +988,7 @@
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANK6",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 6",
"UMask": "0x6",
"Unit": "iMC"
},
@@ -939,6 +997,7 @@
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANK7",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 7",
"UMask": "0x7",
"Unit": "iMC"
},
@@ -947,6 +1006,7 @@
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANK8",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 8",
"UMask": "0x8",
"Unit": "iMC"
},
@@ -955,6 +1015,7 @@
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANK9",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 9",
"UMask": "0x9",
"Unit": "iMC"
},
@@ -963,6 +1024,7 @@
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANKG0",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank Group 0 (Banks 0-3)",
"UMask": "0x11",
"Unit": "iMC"
},
@@ -971,6 +1033,7 @@
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANKG1",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank Group 1 (Banks 4-7)",
"UMask": "0x12",
"Unit": "iMC"
},
@@ -979,6 +1042,7 @@
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANKG2",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank Group 2 (Banks 8-11)",
"UMask": "0x13",
"Unit": "iMC"
},
@@ -987,6 +1051,7 @@
"EventCode": "0xB4",
"EventName": "UNC_M_RD_CAS_RANK4.BANKG3",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank Group 3 (Banks 12-15)",
"UMask": "0x14",
"Unit": "iMC"
},
@@ -995,6 +1060,7 @@
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.ALLBANKS",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : All Banks",
"UMask": "0x10",
"Unit": "iMC"
},
@@ -1003,6 +1069,7 @@
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANK0",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 0",
"Unit": "iMC"
},
{
@@ -1010,6 +1077,7 @@
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANK1",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 1",
"UMask": "0x1",
"Unit": "iMC"
},
@@ -1018,6 +1086,7 @@
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANK10",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 10",
"UMask": "0xa",
"Unit": "iMC"
},
@@ -1026,6 +1095,7 @@
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANK11",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 11",
"UMask": "0xb",
"Unit": "iMC"
},
@@ -1034,6 +1104,7 @@
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANK12",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 12",
"UMask": "0xc",
"Unit": "iMC"
},
@@ -1042,6 +1113,7 @@
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANK13",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 13",
"UMask": "0xd",
"Unit": "iMC"
},
@@ -1050,6 +1122,7 @@
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANK14",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 14",
"UMask": "0xe",
"Unit": "iMC"
},
@@ -1058,6 +1131,7 @@
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANK15",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 15",
"UMask": "0xf",
"Unit": "iMC"
},
@@ -1066,6 +1140,7 @@
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANK2",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 2",
"UMask": "0x2",
"Unit": "iMC"
},
@@ -1074,6 +1149,7 @@
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANK3",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 3",
"UMask": "0x3",
"Unit": "iMC"
},
@@ -1082,6 +1158,7 @@
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANK4",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 4",
"UMask": "0x4",
"Unit": "iMC"
},
@@ -1090,6 +1167,7 @@
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANK5",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 5",
"UMask": "0x5",
"Unit": "iMC"
},
@@ -1098,6 +1176,7 @@
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANK6",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 6",
"UMask": "0x6",
"Unit": "iMC"
},
@@ -1106,6 +1185,7 @@
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANK7",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 7",
"UMask": "0x7",
"Unit": "iMC"
},
@@ -1114,6 +1194,7 @@
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANK8",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 8",
"UMask": "0x8",
"Unit": "iMC"
},
@@ -1122,6 +1203,7 @@
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANK9",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 9",
"UMask": "0x9",
"Unit": "iMC"
},
@@ -1130,6 +1212,7 @@
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANKG0",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank Group 0 (Banks 0-3)",
"UMask": "0x11",
"Unit": "iMC"
},
@@ -1138,6 +1221,7 @@
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANKG1",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank Group 1 (Banks 4-7)",
"UMask": "0x12",
"Unit": "iMC"
},
@@ -1146,6 +1230,7 @@
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANKG2",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank Group 2 (Banks 8-11)",
"UMask": "0x13",
"Unit": "iMC"
},
@@ -1154,6 +1239,7 @@
"EventCode": "0xB5",
"EventName": "UNC_M_RD_CAS_RANK5.BANKG3",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank Group 3 (Banks 12-15)",
"UMask": "0x14",
"Unit": "iMC"
},
@@ -1162,6 +1248,7 @@
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.ALLBANKS",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : All Banks",
"UMask": "0x10",
"Unit": "iMC"
},
@@ -1170,6 +1257,7 @@
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANK0",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 0",
"Unit": "iMC"
},
{
@@ -1177,6 +1265,7 @@
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANK1",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 1",
"UMask": "0x1",
"Unit": "iMC"
},
@@ -1185,6 +1274,7 @@
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANK10",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 10",
"UMask": "0xa",
"Unit": "iMC"
},
@@ -1193,6 +1283,7 @@
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANK11",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 11",
"UMask": "0xb",
"Unit": "iMC"
},
@@ -1201,6 +1292,7 @@
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANK12",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 12",
"UMask": "0xc",
"Unit": "iMC"
},
@@ -1209,6 +1301,7 @@
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANK13",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 13",
"UMask": "0xd",
"Unit": "iMC"
},
@@ -1217,6 +1310,7 @@
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANK14",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 14",
"UMask": "0xe",
"Unit": "iMC"
},
@@ -1225,6 +1319,7 @@
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANK15",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 15",
"UMask": "0xf",
"Unit": "iMC"
},
@@ -1233,6 +1328,7 @@
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANK2",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 2",
"UMask": "0x2",
"Unit": "iMC"
},
@@ -1241,6 +1337,7 @@
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANK3",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 3",
"UMask": "0x3",
"Unit": "iMC"
},
@@ -1249,6 +1346,7 @@
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANK4",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 4",
"UMask": "0x4",
"Unit": "iMC"
},
@@ -1257,6 +1355,7 @@
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANK5",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 5",
"UMask": "0x5",
"Unit": "iMC"
},
@@ -1265,6 +1364,7 @@
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANK6",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 6",
"UMask": "0x6",
"Unit": "iMC"
},
@@ -1273,6 +1373,7 @@
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANK7",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 7",
"UMask": "0x7",
"Unit": "iMC"
},
@@ -1281,6 +1382,7 @@
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANK8",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 8",
"UMask": "0x8",
"Unit": "iMC"
},
@@ -1289,6 +1391,7 @@
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANK9",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 9",
"UMask": "0x9",
"Unit": "iMC"
},
@@ -1297,6 +1400,7 @@
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANKG0",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank Group 0 (Banks 0-3)",
"UMask": "0x11",
"Unit": "iMC"
},
@@ -1305,6 +1409,7 @@
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANKG1",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank Group 1 (Banks 4-7)",
"UMask": "0x12",
"Unit": "iMC"
},
@@ -1313,6 +1418,7 @@
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANKG2",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank Group 2 (Banks 8-11)",
"UMask": "0x13",
"Unit": "iMC"
},
@@ -1321,6 +1427,7 @@
"EventCode": "0xB6",
"EventName": "UNC_M_RD_CAS_RANK6.BANKG3",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank Group 3 (Banks 12-15)",
"UMask": "0x14",
"Unit": "iMC"
},
@@ -1329,6 +1436,7 @@
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.ALLBANKS",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : All Banks",
"UMask": "0x10",
"Unit": "iMC"
},
@@ -1337,6 +1445,7 @@
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANK0",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 0",
"Unit": "iMC"
},
{
@@ -1344,6 +1453,7 @@
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANK1",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 1",
"UMask": "0x1",
"Unit": "iMC"
},
@@ -1352,6 +1462,7 @@
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANK10",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 10",
"UMask": "0xa",
"Unit": "iMC"
},
@@ -1360,6 +1471,7 @@
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANK11",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 11",
"UMask": "0xb",
"Unit": "iMC"
},
@@ -1368,6 +1480,7 @@
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANK12",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 12",
"UMask": "0xc",
"Unit": "iMC"
},
@@ -1376,6 +1489,7 @@
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANK13",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 13",
"UMask": "0xd",
"Unit": "iMC"
},
@@ -1384,6 +1498,7 @@
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANK14",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 14",
"UMask": "0xe",
"Unit": "iMC"
},
@@ -1392,6 +1507,7 @@
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANK15",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 15",
"UMask": "0xf",
"Unit": "iMC"
},
@@ -1400,6 +1516,7 @@
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANK2",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 2",
"UMask": "0x2",
"Unit": "iMC"
},
@@ -1408,6 +1525,7 @@
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANK3",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 3",
"UMask": "0x3",
"Unit": "iMC"
},
@@ -1416,6 +1534,7 @@
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANK4",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 4",
"UMask": "0x4",
"Unit": "iMC"
},
@@ -1424,6 +1543,7 @@
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANK5",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 5",
"UMask": "0x5",
"Unit": "iMC"
},
@@ -1432,6 +1552,7 @@
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANK6",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 6",
"UMask": "0x6",
"Unit": "iMC"
},
@@ -1440,6 +1561,7 @@
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANK7",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 7",
"UMask": "0x7",
"Unit": "iMC"
},
@@ -1448,6 +1570,7 @@
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANK8",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 8",
"UMask": "0x8",
"Unit": "iMC"
},
@@ -1456,6 +1579,7 @@
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANK9",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank 9",
"UMask": "0x9",
"Unit": "iMC"
},
@@ -1464,6 +1588,7 @@
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANKG0",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank Group 0 (Banks 0-3)",
"UMask": "0x11",
"Unit": "iMC"
},
@@ -1472,6 +1597,7 @@
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANKG1",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank Group 1 (Banks 4-7)",
"UMask": "0x12",
"Unit": "iMC"
},
@@ -1480,6 +1606,7 @@
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANKG2",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank Group 2 (Banks 8-11)",
"UMask": "0x13",
"Unit": "iMC"
},
@@ -1488,6 +1615,7 @@
"EventCode": "0xB7",
"EventName": "UNC_M_RD_CAS_RANK7.BANKG3",
"PerPkg": "1",
+ "PublicDescription": "RD_CAS Access to Rank 0 : Bank Group 3 (Banks 12-15)",
"UMask": "0x14",
"Unit": "iMC"
},
@@ -1598,6 +1726,7 @@
"EventCode": "0xB8",
"EventName": "UNC_M_WR_CAS_RANK0.ALLBANKS",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : All Banks",
"UMask": "0x10",
"Unit": "iMC"
},
@@ -1606,6 +1735,7 @@
"EventCode": "0xB8",
"EventName": "UNC_M_WR_CAS_RANK0.BANK0",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 0",
"Unit": "iMC"
},
{
@@ -1613,6 +1743,7 @@
"EventCode": "0xB8",
"EventName": "UNC_M_WR_CAS_RANK0.BANK1",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 1",
"UMask": "0x1",
"Unit": "iMC"
},
@@ -1621,6 +1752,7 @@
"EventCode": "0xB8",
"EventName": "UNC_M_WR_CAS_RANK0.BANK10",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 10",
"UMask": "0xa",
"Unit": "iMC"
},
@@ -1629,6 +1761,7 @@
"EventCode": "0xB8",
"EventName": "UNC_M_WR_CAS_RANK0.BANK11",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 11",
"UMask": "0xb",
"Unit": "iMC"
},
@@ -1637,6 +1770,7 @@
"EventCode": "0xB8",
"EventName": "UNC_M_WR_CAS_RANK0.BANK12",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 12",
"UMask": "0xc",
"Unit": "iMC"
},
@@ -1645,6 +1779,7 @@
"EventCode": "0xB8",
"EventName": "UNC_M_WR_CAS_RANK0.BANK13",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 13",
"UMask": "0xd",
"Unit": "iMC"
},
@@ -1653,6 +1788,7 @@
"EventCode": "0xB8",
"EventName": "UNC_M_WR_CAS_RANK0.BANK14",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 14",
"UMask": "0xe",
"Unit": "iMC"
},
@@ -1661,6 +1797,7 @@
"EventCode": "0xB8",
"EventName": "UNC_M_WR_CAS_RANK0.BANK15",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 15",
"UMask": "0xf",
"Unit": "iMC"
},
@@ -1669,6 +1806,7 @@
"EventCode": "0xB8",
"EventName": "UNC_M_WR_CAS_RANK0.BANK2",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 2",
"UMask": "0x2",
"Unit": "iMC"
},
@@ -1677,6 +1815,7 @@
"EventCode": "0xB8",
"EventName": "UNC_M_WR_CAS_RANK0.BANK3",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 3",
"UMask": "0x3",
"Unit": "iMC"
},
@@ -1685,6 +1824,7 @@
"EventCode": "0xB8",
"EventName": "UNC_M_WR_CAS_RANK0.BANK4",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 4",
"UMask": "0x4",
"Unit": "iMC"
},
@@ -1693,6 +1833,7 @@
"EventCode": "0xB8",
"EventName": "UNC_M_WR_CAS_RANK0.BANK5",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 5",
"UMask": "0x5",
"Unit": "iMC"
},
@@ -1701,6 +1842,7 @@
"EventCode": "0xB8",
"EventName": "UNC_M_WR_CAS_RANK0.BANK6",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 6",
"UMask": "0x6",
"Unit": "iMC"
},
@@ -1709,6 +1851,7 @@
"EventCode": "0xB8",
"EventName": "UNC_M_WR_CAS_RANK0.BANK7",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 7",
"UMask": "0x7",
"Unit": "iMC"
},
@@ -1717,6 +1860,7 @@
"EventCode": "0xB8",
"EventName": "UNC_M_WR_CAS_RANK0.BANK8",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 8",
"UMask": "0x8",
"Unit": "iMC"
},
@@ -1725,6 +1869,7 @@
"EventCode": "0xB8",
"EventName": "UNC_M_WR_CAS_RANK0.BANK9",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 9",
"UMask": "0x9",
"Unit": "iMC"
},
@@ -1733,6 +1878,7 @@
"EventCode": "0xB8",
"EventName": "UNC_M_WR_CAS_RANK0.BANKG0",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank Group 0 (Banks 0-3)",
"UMask": "0x11",
"Unit": "iMC"
},
@@ -1741,6 +1887,7 @@
"EventCode": "0xB8",
"EventName": "UNC_M_WR_CAS_RANK0.BANKG1",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank Group 1 (Banks 4-7)",
"UMask": "0x12",
"Unit": "iMC"
},
@@ -1749,6 +1896,7 @@
"EventCode": "0xB8",
"EventName": "UNC_M_WR_CAS_RANK0.BANKG2",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank Group 2 (Banks 8-11)",
"UMask": "0x13",
"Unit": "iMC"
},
@@ -1757,6 +1905,7 @@
"EventCode": "0xB8",
"EventName": "UNC_M_WR_CAS_RANK0.BANKG3",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank Group 3 (Banks 12-15)",
"UMask": "0x14",
"Unit": "iMC"
},
@@ -1765,6 +1914,7 @@
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.ALLBANKS",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : All Banks",
"UMask": "0x10",
"Unit": "iMC"
},
@@ -1773,6 +1923,7 @@
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANK0",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 0",
"Unit": "iMC"
},
{
@@ -1780,6 +1931,7 @@
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANK1",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 1",
"UMask": "0x1",
"Unit": "iMC"
},
@@ -1788,6 +1940,7 @@
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANK10",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 10",
"UMask": "0xa",
"Unit": "iMC"
},
@@ -1796,6 +1949,7 @@
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANK11",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 11",
"UMask": "0xb",
"Unit": "iMC"
},
@@ -1804,6 +1958,7 @@
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANK12",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 12",
"UMask": "0xc",
"Unit": "iMC"
},
@@ -1812,6 +1967,7 @@
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANK13",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 13",
"UMask": "0xd",
"Unit": "iMC"
},
@@ -1820,6 +1976,7 @@
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANK14",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 14",
"UMask": "0xe",
"Unit": "iMC"
},
@@ -1828,6 +1985,7 @@
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANK15",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 15",
"UMask": "0xf",
"Unit": "iMC"
},
@@ -1836,6 +1994,7 @@
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANK2",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 2",
"UMask": "0x2",
"Unit": "iMC"
},
@@ -1844,6 +2003,7 @@
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANK3",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 3",
"UMask": "0x3",
"Unit": "iMC"
},
@@ -1852,6 +2012,7 @@
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANK4",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 4",
"UMask": "0x4",
"Unit": "iMC"
},
@@ -1860,6 +2021,7 @@
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANK5",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 5",
"UMask": "0x5",
"Unit": "iMC"
},
@@ -1868,6 +2030,7 @@
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANK6",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 6",
"UMask": "0x6",
"Unit": "iMC"
},
@@ -1876,6 +2039,7 @@
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANK7",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 7",
"UMask": "0x7",
"Unit": "iMC"
},
@@ -1884,6 +2048,7 @@
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANK8",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 8",
"UMask": "0x8",
"Unit": "iMC"
},
@@ -1892,6 +2057,7 @@
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANK9",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 9",
"UMask": "0x9",
"Unit": "iMC"
},
@@ -1900,6 +2066,7 @@
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANKG0",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank Group 0 (Banks 0-3)",
"UMask": "0x11",
"Unit": "iMC"
},
@@ -1908,6 +2075,7 @@
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANKG1",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank Group 1 (Banks 4-7)",
"UMask": "0x12",
"Unit": "iMC"
},
@@ -1916,6 +2084,7 @@
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANKG2",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank Group 2 (Banks 8-11)",
"UMask": "0x13",
"Unit": "iMC"
},
@@ -1924,6 +2093,7 @@
"EventCode": "0xB9",
"EventName": "UNC_M_WR_CAS_RANK1.BANKG3",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank Group 3 (Banks 12-15)",
"UMask": "0x14",
"Unit": "iMC"
},
@@ -1932,6 +2102,7 @@
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.ALLBANKS",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : All Banks",
"UMask": "0x10",
"Unit": "iMC"
},
@@ -1940,6 +2111,7 @@
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANK0",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 0",
"Unit": "iMC"
},
{
@@ -1947,6 +2119,7 @@
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANK1",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 1",
"UMask": "0x1",
"Unit": "iMC"
},
@@ -1955,6 +2128,7 @@
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANK10",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 10",
"UMask": "0xa",
"Unit": "iMC"
},
@@ -1963,6 +2137,7 @@
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANK11",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 11",
"UMask": "0xb",
"Unit": "iMC"
},
@@ -1971,6 +2146,7 @@
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANK12",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 12",
"UMask": "0xc",
"Unit": "iMC"
},
@@ -1979,6 +2155,7 @@
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANK13",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 13",
"UMask": "0xd",
"Unit": "iMC"
},
@@ -1987,6 +2164,7 @@
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANK14",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 14",
"UMask": "0xe",
"Unit": "iMC"
},
@@ -1995,6 +2173,7 @@
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANK15",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 15",
"UMask": "0xf",
"Unit": "iMC"
},
@@ -2003,6 +2182,7 @@
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANK2",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 2",
"UMask": "0x2",
"Unit": "iMC"
},
@@ -2011,6 +2191,7 @@
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANK3",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 3",
"UMask": "0x3",
"Unit": "iMC"
},
@@ -2019,6 +2200,7 @@
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANK4",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 4",
"UMask": "0x4",
"Unit": "iMC"
},
@@ -2027,6 +2209,7 @@
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANK5",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 5",
"UMask": "0x5",
"Unit": "iMC"
},
@@ -2035,6 +2218,7 @@
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANK6",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 6",
"UMask": "0x6",
"Unit": "iMC"
},
@@ -2043,6 +2227,7 @@
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANK7",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 7",
"UMask": "0x7",
"Unit": "iMC"
},
@@ -2051,6 +2236,7 @@
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANK8",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 8",
"UMask": "0x8",
"Unit": "iMC"
},
@@ -2059,6 +2245,7 @@
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANK9",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 9",
"UMask": "0x9",
"Unit": "iMC"
},
@@ -2067,6 +2254,7 @@
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANKG0",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank Group 0 (Banks 0-3)",
"UMask": "0x11",
"Unit": "iMC"
},
@@ -2075,6 +2263,7 @@
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANKG1",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank Group 1 (Banks 4-7)",
"UMask": "0x12",
"Unit": "iMC"
},
@@ -2083,6 +2272,7 @@
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANKG2",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank Group 2 (Banks 8-11)",
"UMask": "0x13",
"Unit": "iMC"
},
@@ -2091,6 +2281,7 @@
"EventCode": "0xBC",
"EventName": "UNC_M_WR_CAS_RANK4.BANKG3",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank Group 3 (Banks 12-15)",
"UMask": "0x14",
"Unit": "iMC"
},
@@ -2099,6 +2290,7 @@
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.ALLBANKS",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : All Banks",
"UMask": "0x10",
"Unit": "iMC"
},
@@ -2107,6 +2299,7 @@
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANK0",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 0",
"Unit": "iMC"
},
{
@@ -2114,6 +2307,7 @@
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANK1",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 1",
"UMask": "0x1",
"Unit": "iMC"
},
@@ -2122,6 +2316,7 @@
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANK10",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 10",
"UMask": "0xa",
"Unit": "iMC"
},
@@ -2130,6 +2325,7 @@
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANK11",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 11",
"UMask": "0xb",
"Unit": "iMC"
},
@@ -2138,6 +2334,7 @@
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANK12",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 12",
"UMask": "0xc",
"Unit": "iMC"
},
@@ -2146,6 +2343,7 @@
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANK13",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 13",
"UMask": "0xd",
"Unit": "iMC"
},
@@ -2154,6 +2352,7 @@
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANK14",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 14",
"UMask": "0xe",
"Unit": "iMC"
},
@@ -2162,6 +2361,7 @@
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANK15",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 15",
"UMask": "0xf",
"Unit": "iMC"
},
@@ -2170,6 +2370,7 @@
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANK2",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 2",
"UMask": "0x2",
"Unit": "iMC"
},
@@ -2178,6 +2379,7 @@
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANK3",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 3",
"UMask": "0x3",
"Unit": "iMC"
},
@@ -2186,6 +2388,7 @@
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANK4",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 4",
"UMask": "0x4",
"Unit": "iMC"
},
@@ -2194,6 +2397,7 @@
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANK5",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 5",
"UMask": "0x5",
"Unit": "iMC"
},
@@ -2202,6 +2406,7 @@
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANK6",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 6",
"UMask": "0x6",
"Unit": "iMC"
},
@@ -2210,6 +2415,7 @@
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANK7",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 7",
"UMask": "0x7",
"Unit": "iMC"
},
@@ -2218,6 +2424,7 @@
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANK8",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 8",
"UMask": "0x8",
"Unit": "iMC"
},
@@ -2226,6 +2433,7 @@
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANK9",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 9",
"UMask": "0x9",
"Unit": "iMC"
},
@@ -2234,6 +2442,7 @@
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANKG0",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank Group 0 (Banks 0-3)",
"UMask": "0x11",
"Unit": "iMC"
},
@@ -2242,6 +2451,7 @@
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANKG1",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank Group 1 (Banks 4-7)",
"UMask": "0x12",
"Unit": "iMC"
},
@@ -2250,6 +2460,7 @@
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANKG2",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank Group 2 (Banks 8-11)",
"UMask": "0x13",
"Unit": "iMC"
},
@@ -2258,6 +2469,7 @@
"EventCode": "0xBD",
"EventName": "UNC_M_WR_CAS_RANK5.BANKG3",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank Group 3 (Banks 12-15)",
"UMask": "0x14",
"Unit": "iMC"
},
@@ -2266,6 +2478,7 @@
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.ALLBANKS",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : All Banks",
"UMask": "0x10",
"Unit": "iMC"
},
@@ -2274,6 +2487,7 @@
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANK0",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 0",
"Unit": "iMC"
},
{
@@ -2281,6 +2495,7 @@
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANK1",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 1",
"UMask": "0x1",
"Unit": "iMC"
},
@@ -2289,6 +2504,7 @@
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANK10",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 10",
"UMask": "0xa",
"Unit": "iMC"
},
@@ -2297,6 +2513,7 @@
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANK11",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 11",
"UMask": "0xb",
"Unit": "iMC"
},
@@ -2305,6 +2522,7 @@
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANK12",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 12",
"UMask": "0xc",
"Unit": "iMC"
},
@@ -2313,6 +2531,7 @@
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANK13",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 13",
"UMask": "0xd",
"Unit": "iMC"
},
@@ -2321,6 +2540,7 @@
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANK14",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 14",
"UMask": "0xe",
"Unit": "iMC"
},
@@ -2329,6 +2549,7 @@
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANK15",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 15",
"UMask": "0xf",
"Unit": "iMC"
},
@@ -2337,6 +2558,7 @@
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANK2",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 2",
"UMask": "0x2",
"Unit": "iMC"
},
@@ -2345,6 +2567,7 @@
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANK3",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 3",
"UMask": "0x3",
"Unit": "iMC"
},
@@ -2353,6 +2576,7 @@
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANK4",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 4",
"UMask": "0x4",
"Unit": "iMC"
},
@@ -2361,6 +2585,7 @@
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANK5",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 5",
"UMask": "0x5",
"Unit": "iMC"
},
@@ -2369,6 +2594,7 @@
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANK6",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 6",
"UMask": "0x6",
"Unit": "iMC"
},
@@ -2377,6 +2603,7 @@
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANK7",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 7",
"UMask": "0x7",
"Unit": "iMC"
},
@@ -2385,6 +2612,7 @@
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANK8",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 8",
"UMask": "0x8",
"Unit": "iMC"
},
@@ -2393,6 +2621,7 @@
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANK9",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 9",
"UMask": "0x9",
"Unit": "iMC"
},
@@ -2401,6 +2630,7 @@
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANKG0",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank Group 0 (Banks 0-3)",
"UMask": "0x11",
"Unit": "iMC"
},
@@ -2409,6 +2639,7 @@
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANKG1",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank Group 1 (Banks 4-7)",
"UMask": "0x12",
"Unit": "iMC"
},
@@ -2417,6 +2648,7 @@
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANKG2",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank Group 2 (Banks 8-11)",
"UMask": "0x13",
"Unit": "iMC"
},
@@ -2425,6 +2657,7 @@
"EventCode": "0xBE",
"EventName": "UNC_M_WR_CAS_RANK6.BANKG3",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank Group 3 (Banks 12-15)",
"UMask": "0x14",
"Unit": "iMC"
},
@@ -2433,6 +2666,7 @@
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.ALLBANKS",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : All Banks",
"UMask": "0x10",
"Unit": "iMC"
},
@@ -2441,6 +2675,7 @@
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANK0",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 0",
"Unit": "iMC"
},
{
@@ -2448,6 +2683,7 @@
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANK1",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 1",
"UMask": "0x1",
"Unit": "iMC"
},
@@ -2456,6 +2692,7 @@
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANK10",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 10",
"UMask": "0xa",
"Unit": "iMC"
},
@@ -2464,6 +2701,7 @@
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANK11",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 11",
"UMask": "0xb",
"Unit": "iMC"
},
@@ -2472,6 +2710,7 @@
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANK12",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 12",
"UMask": "0xc",
"Unit": "iMC"
},
@@ -2480,6 +2719,7 @@
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANK13",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 13",
"UMask": "0xd",
"Unit": "iMC"
},
@@ -2488,6 +2728,7 @@
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANK14",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 14",
"UMask": "0xe",
"Unit": "iMC"
},
@@ -2496,6 +2737,7 @@
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANK15",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 15",
"UMask": "0xf",
"Unit": "iMC"
},
@@ -2504,6 +2746,7 @@
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANK2",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 2",
"UMask": "0x2",
"Unit": "iMC"
},
@@ -2512,6 +2755,7 @@
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANK3",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 3",
"UMask": "0x3",
"Unit": "iMC"
},
@@ -2520,6 +2764,7 @@
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANK4",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 4",
"UMask": "0x4",
"Unit": "iMC"
},
@@ -2528,6 +2773,7 @@
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANK5",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 5",
"UMask": "0x5",
"Unit": "iMC"
},
@@ -2536,6 +2782,7 @@
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANK6",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 6",
"UMask": "0x6",
"Unit": "iMC"
},
@@ -2544,6 +2791,7 @@
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANK7",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 7",
"UMask": "0x7",
"Unit": "iMC"
},
@@ -2552,6 +2800,7 @@
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANK8",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 8",
"UMask": "0x8",
"Unit": "iMC"
},
@@ -2560,6 +2809,7 @@
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANK9",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank 9",
"UMask": "0x9",
"Unit": "iMC"
},
@@ -2568,6 +2818,7 @@
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANKG0",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank Group 0 (Banks 0-3)",
"UMask": "0x11",
"Unit": "iMC"
},
@@ -2576,6 +2827,7 @@
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANKG1",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank Group 1 (Banks 4-7)",
"UMask": "0x12",
"Unit": "iMC"
},
@@ -2584,6 +2836,7 @@
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANKG2",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank Group 2 (Banks 8-11)",
"UMask": "0x13",
"Unit": "iMC"
},
@@ -2592,6 +2845,7 @@
"EventCode": "0xBF",
"EventName": "UNC_M_WR_CAS_RANK7.BANKG3",
"PerPkg": "1",
+ "PublicDescription": "WR_CAS Access to Rank 0 : Bank Group 3 (Banks 12-15)",
"UMask": "0x14",
"Unit": "iMC"
}
diff --git a/tools/perf/pmu-events/arch/x86/broadwellde/uncore-other.json b/tools/perf/pmu-events/arch/x86/broadwellde/uncore-other.json
index 753b381b77fe..fea3dea67f38 100644
--- a/tools/perf/pmu-events/arch/x86/broadwellde/uncore-other.json
+++ b/tools/perf/pmu-events/arch/x86/broadwellde/uncore-other.json
@@ -101,6 +101,7 @@
"EventCode": "0x14",
"EventName": "UNC_I_MISC0.2ND_ATOMIC_INSERT",
"PerPkg": "1",
+ "PublicDescription": "Counts Timeouts - Set 0 : Cache Inserts of Atomic Transactions as Secondary",
"UMask": "0x10",
"Unit": "IRP"
},
@@ -109,6 +110,7 @@
"EventCode": "0x14",
"EventName": "UNC_I_MISC0.2ND_RD_INSERT",
"PerPkg": "1",
+ "PublicDescription": "Counts Timeouts - Set 0 : Cache Inserts of Read Transactions as Secondary",
"UMask": "0x4",
"Unit": "IRP"
},
@@ -117,6 +119,7 @@
"EventCode": "0x14",
"EventName": "UNC_I_MISC0.2ND_WR_INSERT",
"PerPkg": "1",
+ "PublicDescription": "Counts Timeouts - Set 0 : Cache Inserts of Write Transactions as Secondary",
"UMask": "0x8",
"Unit": "IRP"
},
@@ -125,6 +128,7 @@
"EventCode": "0x14",
"EventName": "UNC_I_MISC0.FAST_REJ",
"PerPkg": "1",
+ "PublicDescription": "Counts Timeouts - Set 0 : Fastpath Rejects",
"UMask": "0x2",
"Unit": "IRP"
},
@@ -133,6 +137,7 @@
"EventCode": "0x14",
"EventName": "UNC_I_MISC0.FAST_REQ",
"PerPkg": "1",
+ "PublicDescription": "Counts Timeouts - Set 0 : Fastpath Requests",
"UMask": "0x1",
"Unit": "IRP"
},
@@ -141,6 +146,7 @@
"EventCode": "0x14",
"EventName": "UNC_I_MISC0.FAST_XFER",
"PerPkg": "1",
+ "PublicDescription": "Counts Timeouts - Set 0 : Fastpath Transfers From Primary to Secondary",
"UMask": "0x20",
"Unit": "IRP"
},
@@ -149,6 +155,7 @@
"EventCode": "0x14",
"EventName": "UNC_I_MISC0.PF_ACK_HINT",
"PerPkg": "1",
+ "PublicDescription": "Counts Timeouts - Set 0 : Prefetch Ack Hints From Primary to Secondary",
"UMask": "0x40",
"Unit": "IRP"
},
@@ -175,6 +182,7 @@
"EventCode": "0x15",
"EventName": "UNC_I_MISC1.LOST_FWD",
"PerPkg": "1",
+ "PublicDescription": "Misc Events - Set 1 : Lost Forward : Snoop pulled away ownership before a write was committed",
"UMask": "0x10",
"Unit": "IRP"
},
@@ -241,6 +249,7 @@
"Unit": "IRP"
},
{
+ "BriefDescription": "UNC_I_RxR_BL_DRS_CYCLES_FULL",
"EventCode": "0x4",
"EventName": "UNC_I_RxR_BL_DRS_CYCLES_FULL",
"PerPkg": "1",
@@ -256,6 +265,7 @@
"Unit": "IRP"
},
{
+ "BriefDescription": "UNC_I_RxR_BL_DRS_OCCUPANCY",
"EventCode": "0x7",
"EventName": "UNC_I_RxR_BL_DRS_OCCUPANCY",
"PerPkg": "1",
@@ -263,6 +273,7 @@
"Unit": "IRP"
},
{
+ "BriefDescription": "UNC_I_RxR_BL_NCB_CYCLES_FULL",
"EventCode": "0x5",
"EventName": "UNC_I_RxR_BL_NCB_CYCLES_FULL",
"PerPkg": "1",
@@ -278,6 +289,7 @@
"Unit": "IRP"
},
{
+ "BriefDescription": "UNC_I_RxR_BL_NCB_OCCUPANCY",
"EventCode": "0x8",
"EventName": "UNC_I_RxR_BL_NCB_OCCUPANCY",
"PerPkg": "1",
@@ -285,6 +297,7 @@
"Unit": "IRP"
},
{
+ "BriefDescription": "UNC_I_RxR_BL_NCS_CYCLES_FULL",
"EventCode": "0x6",
"EventName": "UNC_I_RxR_BL_NCS_CYCLES_FULL",
"PerPkg": "1",
@@ -300,6 +313,7 @@
"Unit": "IRP"
},
{
+ "BriefDescription": "UNC_I_RxR_BL_NCS_OCCUPANCY",
"EventCode": "0x9",
"EventName": "UNC_I_RxR_BL_NCS_OCCUPANCY",
"PerPkg": "1",
@@ -311,6 +325,7 @@
"EventCode": "0x17",
"EventName": "UNC_I_SNOOP_RESP.HIT_ES",
"PerPkg": "1",
+ "PublicDescription": "Snoop Responses : Hit E or S",
"UMask": "0x4",
"Unit": "IRP"
},
@@ -319,6 +334,7 @@
"EventCode": "0x17",
"EventName": "UNC_I_SNOOP_RESP.HIT_I",
"PerPkg": "1",
+ "PublicDescription": "Snoop Responses : Hit I",
"UMask": "0x2",
"Unit": "IRP"
},
@@ -327,6 +343,7 @@
"EventCode": "0x17",
"EventName": "UNC_I_SNOOP_RESP.HIT_M",
"PerPkg": "1",
+ "PublicDescription": "Snoop Responses : Hit M",
"UMask": "0x8",
"Unit": "IRP"
},
@@ -335,6 +352,7 @@
"EventCode": "0x17",
"EventName": "UNC_I_SNOOP_RESP.MISS",
"PerPkg": "1",
+ "PublicDescription": "Snoop Responses : Miss",
"UMask": "0x1",
"Unit": "IRP"
},
@@ -343,6 +361,7 @@
"EventCode": "0x17",
"EventName": "UNC_I_SNOOP_RESP.SNPCODE",
"PerPkg": "1",
+ "PublicDescription": "Snoop Responses : SnpCode",
"UMask": "0x10",
"Unit": "IRP"
},
@@ -351,6 +370,7 @@
"EventCode": "0x17",
"EventName": "UNC_I_SNOOP_RESP.SNPDATA",
"PerPkg": "1",
+ "PublicDescription": "Snoop Responses : SnpData",
"UMask": "0x20",
"Unit": "IRP"
},
@@ -359,6 +379,7 @@
"EventCode": "0x17",
"EventName": "UNC_I_SNOOP_RESP.SNPINV",
"PerPkg": "1",
+ "PublicDescription": "Snoop Responses : SnpInv",
"UMask": "0x40",
"Unit": "IRP"
},
@@ -453,7 +474,7 @@
"EventCode": "0xD",
"EventName": "UNC_I_TxR_REQUEST_OCCUPANCY",
"PerPkg": "1",
- "PublicDescription": "Accumultes the number of outstanding outbound requests from the IRP to the switch (towards the devices). This can be used in conjuection with the allocations event in order to calculate average latency of outbound requests.",
+ "PublicDescription": "Accumulates the number of outstanding outbound requests from the IRP to the switch (towards the devices). This can be used in conjunction with the allocations event in order to calculate average latency of outbound requests.",
"Unit": "IRP"
},
{
@@ -465,6 +486,7 @@
"Unit": "R2PCIe"
},
{
+ "BriefDescription": "UNC_R2_IIO_CREDIT.ISOCH_QPI0",
"EventCode": "0x2D",
"EventName": "UNC_R2_IIO_CREDIT.ISOCH_QPI0",
"PerPkg": "1",
@@ -472,6 +494,7 @@
"Unit": "R2PCIe"
},
{
+ "BriefDescription": "UNC_R2_IIO_CREDIT.ISOCH_QPI1",
"EventCode": "0x2D",
"EventName": "UNC_R2_IIO_CREDIT.ISOCH_QPI1",
"PerPkg": "1",
@@ -479,6 +502,7 @@
"Unit": "R2PCIe"
},
{
+ "BriefDescription": "UNC_R2_IIO_CREDIT.PRQ_QPI0",
"EventCode": "0x2D",
"EventName": "UNC_R2_IIO_CREDIT.PRQ_QPI0",
"PerPkg": "1",
@@ -486,6 +510,7 @@
"Unit": "R2PCIe"
},
{
+ "BriefDescription": "UNC_R2_IIO_CREDIT.PRQ_QPI1",
"EventCode": "0x2D",
"EventName": "UNC_R2_IIO_CREDIT.PRQ_QPI1",
"PerPkg": "1",
diff --git a/tools/perf/pmu-events/arch/x86/broadwellde/uncore-power.json b/tools/perf/pmu-events/arch/x86/broadwellde/uncore-power.json
index 124b3fe2e0e1..83d20130c217 100644
--- a/tools/perf/pmu-events/arch/x86/broadwellde/uncore-power.json
+++ b/tools/perf/pmu-events/arch/x86/broadwellde/uncore-power.json
@@ -395,7 +395,7 @@
"EventCode": "0x80",
"EventName": "UNC_P_POWER_STATE_OCCUPANCY.CORES_C0",
"PerPkg": "1",
- "PublicDescription": "This is an occupancy event that tracks the number of cores that are in the chosen C-State. It can be used by itself to get the average number of cores in that C-state with threshholding to generate histograms, or with other PCU events and occupancy triggering to capture other details.",
+ "PublicDescription": "This is an occupancy event that tracks the number of cores that are in the chosen C-State. It can be used by itself to get the average number of cores in that C-state with thresholding to generate histograms, or with other PCU events and occupancy triggering to capture other details.",
"Unit": "PCU"
},
{
@@ -403,7 +403,7 @@
"EventCode": "0x80",
"EventName": "UNC_P_POWER_STATE_OCCUPANCY.CORES_C3",
"PerPkg": "1",
- "PublicDescription": "This is an occupancy event that tracks the number of cores that are in the chosen C-State. It can be used by itself to get the average number of cores in that C-state with threshholding to generate histograms, or with other PCU events and occupancy triggering to capture other details.",
+ "PublicDescription": "This is an occupancy event that tracks the number of cores that are in the chosen C-State. It can be used by itself to get the average number of cores in that C-state with thresholding to generate histograms, or with other PCU events and occupancy triggering to capture other details.",
"Unit": "PCU"
},
{
@@ -411,7 +411,7 @@
"EventCode": "0x80",
"EventName": "UNC_P_POWER_STATE_OCCUPANCY.CORES_C6",
"PerPkg": "1",
- "PublicDescription": "This is an occupancy event that tracks the number of cores that are in the chosen C-State. It can be used by itself to get the average number of cores in that C-state with threshholding to generate histograms, or with other PCU events and occupancy triggering to capture other details.",
+ "PublicDescription": "This is an occupancy event that tracks the number of cores that are in the chosen C-State. It can be used by itself to get the average number of cores in that C-state with thresholding to generate histograms, or with other PCU events and occupancy triggering to capture other details.",
"Unit": "PCU"
},
{
@@ -427,7 +427,7 @@
"EventCode": "0x9",
"EventName": "UNC_P_PROCHOT_INTERNAL_CYCLES",
"PerPkg": "1",
- "PublicDescription": "Counts the number of cycles that we are in Interal PROCHOT mode. This mode is triggered when a sensor on the die determines that we are too hot and must throttle to avoid damaging the chip.",
+ "PublicDescription": "Counts the number of cycles that we are in Internal PROCHOT mode. This mode is triggered when a sensor on the die determines that we are too hot and must throttle to avoid damaging the chip.",
"Unit": "PCU"
},
{
@@ -439,6 +439,7 @@
"Unit": "PCU"
},
{
+ "BriefDescription": "UNC_P_UFS_TRANSITIONS_RING_GV",
"EventCode": "0x79",
"EventName": "UNC_P_UFS_TRANSITIONS_RING_GV",
"PerPkg": "1",
@@ -450,6 +451,7 @@
"EventCode": "0x42",
"EventName": "UNC_P_VR_HOT_CYCLES",
"PerPkg": "1",
+ "PublicDescription": "VR Hot : Number of cycles that a CPU SVID VR is hot. Does not cover DRAM VRs",
"Unit": "PCU"
}
]
diff --git a/tools/perf/pmu-events/arch/x86/mapfile.csv b/tools/perf/pmu-events/arch/x86/mapfile.csv
index 70be860bcb53..4fa827c7f719 100644
--- a/tools/perf/pmu-events/arch/x86/mapfile.csv
+++ b/tools/perf/pmu-events/arch/x86/mapfile.csv
@@ -3,7 +3,7 @@ GenuineIntel-6-(97|9A|B7|BA|BF),v1.19,alderlake,core
GenuineIntel-6-BE,v1.19,alderlaken,core
GenuineIntel-6-(1C|26|27|35|36),v4,bonnell,core
GenuineIntel-6-(3D|47),v27,broadwell,core
-GenuineIntel-6-56,v7,broadwellde,core
+GenuineIntel-6-56,v9,broadwellde,core
GenuineIntel-6-4F,v19,broadwellx,core
GenuineIntel-6-55-[56789ABCDEF],v1.17,cascadelakex,core
GenuineIntel-6-9[6C],v1.03,elkhartlake,core
--
2.40.0.348.gf938b09366-goog

Next message: Ian Rogers: "[PATCH v3 3/9] perf vendor events: Broadwellx v20 events"
Previous message: Yosry Ahmed: "Re: [RFC PATCH 1/7] cgroup: rstat: only disable interrupts for the percpu lock"
In reply to: Ian Rogers: "[PATCH v3 1/9] perf vendor events: Broadwell v27 events"
Next in thread: Ian Rogers: "[PATCH v3 3/9] perf vendor events: Broadwellx v20 events"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]