[PATCH net-next v5 3/8] octeon_ep: control mailbox for multiple PFs

[Veerasenareddy Burru]

Add control mailbox support for multiple PFs.
Update control mbox base address calculation based on PF function link.

Signed-off-by: Veerasenareddy Burru <vburru@xxxxxxxxxxx>
Signed-off-by: Abhijit Ayarekar <aayarekar@xxxxxxxxxxx>
---
v4 -> v5:
 * no change

v3 -> v4:
 * resovled review comments
   https://lore.kernel.org/all/Y+vJkPO1UZPDSFT2@boxer/
   - fixed rct violation.

v2 -> v3:
 * no change

v1 -> v2:
 * no change

 .../ethernet/marvell/octeon_ep/octep_cn9k_pf.c   | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/octeon_ep/octep_cn9k_pf.c b/drivers/net/ethernet/marvell/octeon_ep/octep_cn9k_pf.c
index adc2279bc66d..e2503c9bc8a1 100644
--- a/drivers/net/ethernet/marvell/octeon_ep/octep_cn9k_pf.c
+++ b/drivers/net/ethernet/marvell/octeon_ep/octep_cn9k_pf.c
@@ -13,6 +13,9 @@
 #include "octep_main.h"
 #include "octep_regs_cn9k_pf.h"
 
+#define CTRL_MBOX_MAX_PF	128
+#define CTRL_MBOX_SZ		((size_t)(0x400000 / CTRL_MBOX_MAX_PF))
+
 /* Names of Hardware non-queue generic interrupts */
 static char *cn93_non_ioq_msix_names[] = {
 	"epf_ire_rint",
@@ -198,7 +201,9 @@ static void octep_init_config_cn93_pf(struct octep_device *oct)
 {
 	struct octep_config *conf = oct->conf;
 	struct pci_dev *pdev = oct->pdev;
+	u8 link = 0;
 	u64 val;
+	int pos;
 
 	/* Read ring configuration:
 	 * PF ring count, number of VFs and rings per VF supported
@@ -234,7 +239,16 @@ static void octep_init_config_cn93_pf(struct octep_device *oct)
 	conf->msix_cfg.ioq_msix = conf->pf_ring_cfg.active_io_rings;
 	conf->msix_cfg.non_ioq_msix_names = cn93_non_ioq_msix_names;
 
-	conf->ctrl_mbox_cfg.barmem_addr = (void __iomem *)oct->mmio[2].hw_addr + (0x400000ull * 7);
+	pos = pci_find_ext_capability(oct->pdev, PCI_EXT_CAP_ID_SRIOV);
+	if (pos) {
+		pci_read_config_byte(oct->pdev,
+				     pos + PCI_SRIOV_FUNC_LINK,
+				     &link);
+		link = PCI_DEVFN(PCI_SLOT(oct->pdev->devfn), link);
+	}
+	conf->ctrl_mbox_cfg.barmem_addr = (void __iomem *)oct->mmio[2].hw_addr +
+					   (0x400000ull * 7) +
+					   (link * CTRL_MBOX_SZ);
 }
 
 /* Setup registers for a hardware Tx Queue  */
-- 
2.36.0