[PATCH 1/5] arm64: dts: qcom: msm8916-thwc-ufi001c: add function to pin config

[Krzysztof Kozlowski]

Bindings require pin configuration nodes to have the function, even if
it is GPIO:

  msm8916-thwc-ufi001c.dtb: pinctrl@1000000: sim-ctrl-default-state: 'oneOf' conditional failed, one must be fixed:
    'esim-sel-pins', 'sim-en-pins', 'sim-sel-pins' do not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
index 8433c9710b1c..978f0abcdf8f 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts
@@ -44,18 +44,21 @@ &msmgpio {
 	sim_ctrl_default: sim-ctrl-default-state {
 		esim-sel-pins {
 			pins = "gpio0", "gpio3";
+			function = "gpio";
 			bias-disable;
 			output-low;
 		};
 
 		sim-en-pins {
 			pins = "gpio1";
+			function = "gpio";
 			bias-disable;
 			output-low;
 		};
 
 		sim-sel-pins {
 			pins = "gpio2";
+			function = "gpio";
 			bias-disable;
 			output-high;
 		};
-- 
2.34.1