[PATCH 4/4] arm64: dts: msm8953: Pad regs to 8 digits
From: Adam Skladowski
Date: Sat Mar 25 2023 - 07:29:33 EST
Follow other dtses and pad regs to 8 digits.
Signed-off-by: Adam Skladowski <a39.skl@xxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8953.dtsi | 98 +++++++++++++--------------
1 file changed, 49 insertions(+), 49 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index 0a1bf1058cbf..684668170353 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -350,12 +350,12 @@ soc: soc@0 {
rpm_msg_ram: sram@60000 {
compatible = "qcom,rpm-msg-ram";
- reg = <0x60000 0x8000>;
+ reg = <0x00060000 0x8000>;
};
hsusb_phy: phy@79000 {
compatible = "qcom,msm8953-qusb2-phy";
- reg = <0x79000 0x180>;
+ reg = <0x00079000 0x180>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>,
@@ -378,8 +378,8 @@ rng@e3000 {
tsens0: thermal-sensor@4a9000 {
compatible = "qcom,msm8953-tsens", "qcom,tsens-v2";
- reg = <0x4a9000 0x1000>, /* TM */
- <0x4a8000 0x1000>; /* SROT */
+ reg = <0x004a9000 0x1000>, /* TM */
+ <0x004a8000 0x1000>; /* SROT */
#qcom,sensors = <16>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>;
@@ -389,12 +389,12 @@ tsens0: thermal-sensor@4a9000 {
restart@4ab000 {
compatible = "qcom,pshold";
- reg = <0x4ab000 0x4>;
+ reg = <0x004ab000 0x4>;
};
tlmm: pinctrl@1000000 {
compatible = "qcom,msm8953-pinctrl";
- reg = <0x1000000 0x300000>;
+ reg = <0x01000000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&tlmm 0 0 142>;
@@ -634,7 +634,7 @@ i2c_8_sleep: i2c-8-sleep-state {
gcc: clock-controller@1800000 {
compatible = "qcom,gcc-msm8953";
- reg = <0x1800000 0x80000>;
+ reg = <0x01800000 0x80000>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
@@ -654,25 +654,25 @@ gcc: clock-controller@1800000 {
tcsr_mutex: hwlock@1905000 {
compatible = "qcom,tcsr-mutex";
- reg = <0x1905000 0x20000>;
+ reg = <0x01905000 0x20000>;
#hwlock-cells = <1>;
};
tcsr: syscon@1937000 {
compatible = "qcom,tcsr-msm8953", "syscon";
- reg = <0x1937000 0x30000>;
+ reg = <0x01937000 0x30000>;
};
tcsr_phy_clk_scheme_sel: syscon@193f044 {
compatible = "qcom,tcsr-msm8953", "syscon";
- reg = <0x193f044 0x4>;
+ reg = <0x0193f044 0x4>;
};
mdss: display-subsystem@1a00000 {
compatible = "qcom,mdss";
- reg = <0x1a00000 0x1000>,
- <0x1ab0000 0x1040>;
+ reg = <0x01a00000 0x1000>,
+ <0x01ab0000 0x1040>;
reg-names = "mdss_phys",
"vbif_phys";
@@ -699,7 +699,7 @@ mdss: display-subsystem@1a00000 {
mdp: display-controller@1a01000 {
compatible = "qcom,msm8953-mdp5", "qcom,mdp5";
- reg = <0x1a01000 0x89000>;
+ reg = <0x01a01000 0x89000>;
reg-names = "mdp_phys";
interrupt-parent = <&mdss>;
@@ -740,7 +740,7 @@ mdp5_intf2_out: endpoint {
dsi0: dsi@1a94000 {
compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl";
- reg = <0x1a94000 0x400>;
+ reg = <0x01a94000 0x400>;
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
@@ -792,9 +792,9 @@ dsi0_out: endpoint {
dsi0_phy: phy@1a94400 {
compatible = "qcom,dsi-phy-14nm-8953";
- reg = <0x1a94400 0x100>,
- <0x1a94500 0x300>,
- <0x1a94800 0x188>;
+ reg = <0x01a94400 0x100>,
+ <0x01a94500 0x300>,
+ <0x01a94800 0x188>;
reg-names = "dsi_phy",
"dsi_phy_lane",
"dsi_pll";
@@ -810,7 +810,7 @@ dsi0_phy: phy@1a94400 {
dsi1: dsi@1a96000 {
compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl";
- reg = <0x1a96000 0x400>;
+ reg = <0x01a96000 0x400>;
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
@@ -859,9 +859,9 @@ dsi1_out: endpoint {
dsi1_phy: phy@1a96400 {
compatible = "qcom,dsi-phy-14nm-8953";
- reg = <0x1a96400 0x100>,
- <0x1a96500 0x300>,
- <0x1a96800 0x188>;
+ reg = <0x01a96400 0x100>,
+ <0x01a96500 0x300>,
+ <0x01a96800 0x188>;
reg-names = "dsi_phy",
"dsi_phy_lane",
"dsi_pll";
@@ -878,7 +878,7 @@ dsi1_phy: phy@1a96400 {
apps_iommu: iommu@1e00000 {
compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1";
- ranges = <0 0x1e20000 0x20000>;
+ ranges = <0 0x01e20000 0x20000>;
clocks = <&gcc GCC_SMMU_CFG_CLK>,
<&gcc GCC_APSS_TCU_ASYNC_CLK>;
@@ -914,11 +914,11 @@ iommu-ctx@16000 {
spmi_bus: spmi@200f000 {
compatible = "qcom,spmi-pmic-arb";
- reg = <0x200f000 0x1000>,
- <0x2400000 0x800000>,
- <0x2c00000 0x800000>,
- <0x3800000 0x200000>,
- <0x200a000 0x2100>;
+ reg = <0x0200f000 0x1000>,
+ <0x02400000 0x800000>,
+ <0x02c00000 0x800000>,
+ <0x03800000 0x200000>,
+ <0x0200a000 0x2100>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupt-names = "periph_irq";
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
@@ -933,7 +933,7 @@ spmi_bus: spmi@200f000 {
usb3: usb@70f8800 {
compatible = "qcom,msm8953-dwc3", "qcom,dwc3";
- reg = <0x70f8800 0x400>;
+ reg = <0x070f8800 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -983,7 +983,7 @@ usb3_dwc3: usb@7000000 {
sdhc_1: mmc@7824900 {
compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4";
- reg = <0x7824900 0x500>, <0x7824000 0x800>;
+ reg = <0x07824900 0x500>, <0x07824000 0x800>;
reg-names = "hc", "core";
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
@@ -1043,7 +1043,7 @@ opp-384000000 {
sdhc_2: mmc@7864900 {
compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4";
- reg = <0x7864900 0x500>, <0x7864000 0x800>;
+ reg = <0x07864900 0x500>, <0x07864000 0x800>;
reg-names = "hc", "core";
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
@@ -1098,7 +1098,7 @@ opp-200000000 {
uart_0: serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x78af000 0x200>;
+ reg = <0x078af000 0x200>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
@@ -1109,7 +1109,7 @@ uart_0: serial@78af000 {
i2c_1: i2c@78b5000 {
compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x78b5000 0x600>;
+ reg = <0x078b5000 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "iface";
clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
@@ -1127,7 +1127,7 @@ i2c_1: i2c@78b5000 {
i2c_2: i2c@78b6000 {
compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x78b6000 0x600>;
+ reg = <0x078b6000 0x600>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "iface";
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
@@ -1145,7 +1145,7 @@ i2c_2: i2c@78b6000 {
i2c_3: i2c@78b7000 {
compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x78b7000 0x600>;
+ reg = <0x078b7000 0x600>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "iface";
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
@@ -1162,7 +1162,7 @@ i2c_3: i2c@78b7000 {
i2c_4: i2c@78b8000 {
compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x78b8000 0x600>;
+ reg = <0x078b8000 0x600>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "iface";
clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
@@ -1179,7 +1179,7 @@ i2c_4: i2c@78b8000 {
i2c_5: i2c@7af5000 {
compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x7af5000 0x600>;
+ reg = <0x07af5000 0x600>;
interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "iface";
clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
@@ -1196,7 +1196,7 @@ i2c_5: i2c@7af5000 {
i2c_6: i2c@7af6000 {
compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x7af6000 0x600>;
+ reg = <0x07af6000 0x600>;
interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "iface";
clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
@@ -1213,7 +1213,7 @@ i2c_6: i2c@7af6000 {
i2c_7: i2c@7af7000 {
compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x7af7000 0x600>;
+ reg = <0x07af7000 0x600>;
interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "iface";
clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
@@ -1230,7 +1230,7 @@ i2c_7: i2c@7af7000 {
i2c_8: i2c@7af8000 {
compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x7af8000 0x600>;
+ reg = <0x07af8000 0x600>;
interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "iface";
clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
@@ -1254,13 +1254,13 @@ intc: interrupt-controller@b000000 {
apcs: mailbox@b011000 {
compatible = "qcom,msm8953-apcs-kpss-global", "syscon";
- reg = <0xb011000 0x1000>;
+ reg = <0x0b011000 0x1000>;
#mbox-cells = <1>;
};
timer@b120000 {
compatible = "arm,armv7-timer-mem";
- reg = <0xb120000 0x1000>;
+ reg = <0x0b120000 0x1000>;
#address-cells = <0x01>;
#size-cells = <0x01>;
ranges;
@@ -1269,49 +1269,49 @@ frame@b121000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb121000 0x1000>,
- <0xb122000 0x1000>;
+ reg = <0x0b121000 0x1000>,
+ <0x0b122000 0x1000>;
};
frame@b123000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb123000 0x1000>;
+ reg = <0x0b123000 0x1000>;
status = "disabled";
};
frame@b124000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb124000 0x1000>;
+ reg = <0x0b124000 0x1000>;
status = "disabled";
};
frame@b125000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb125000 0x1000>;
+ reg = <0x0b125000 0x1000>;
status = "disabled";
};
frame@b126000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb126000 0x1000>;
+ reg = <0x0b126000 0x1000>;
status = "disabled";
};
frame@b127000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb127000 0x1000>;
+ reg = <0x0b127000 0x1000>;
status = "disabled";
};
frame@b128000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xb128000 0x1000>;
+ reg = <0x0b128000 0x1000>;
status = "disabled";
};
};
--
2.25.1