WARNING in isotp_tx_timer_handler and WARNING in print_tainted

From: Dae R. Jeong
Date: Sun Mar 26 2023 - 04:10:24 EST


Hi,

I am curious about the error handling logic in isotp_sendmsg() which
looks a bit unclear to me.

I was looking the `WARNING in isotp_tx_timer_handler` warning [1],
which was firstly addressed by a commit [2] but reoccured even after
the commit.
[1]: https://syzkaller.appspot.com/bug?id=4f492d593461a5e44d76dd9322e179d13191a8ef
[2]: c6adf659a8ba can: isotp: check CAN address family in isotp_bind()

I thought that the warning is caused by the concurrent execution of
two isotp_sendmsg() as described below (I'm not 100% sure though).

CPU1 CPU2
isotp_sendmsg() isotp_sendmsg()
----- -----
old_state = so->tx.state; // ISOTP_IDLE

cmpxchg(&so->tx.state, ISTOP_IDLE, ISOTP_SENDING) // success
...
so->tx.state = ISTOP_WAIT_FIRST_FC;
hrtimer_start(&so->txtimer);

cmpxchg(&so->tx.state, ISTOP_IDLE, ISOTP_SENDING) // failed
// if MSG_DONTWAIT is set in msg->msg_flags or
// a signal is delivered during wait_event_interruptible()
goto err_out;
err_out:
so->tx.state = old_state; // ISTOP_IDLE

isotp_tx_timer_handler()
-----
switch (so->tx.state) {
default:
WARN_ONCE();
}

Then, a commit [3] changed the logic of tx timer, and removed the
WARN_ONCE() statement. So I thought that the issue is completely
handled.
[3]: 4f027cba8216 can: isotp: split tx timer into transmission and timeout

But even after [3] is applied, I found a warning that seems related
occurred [4] (in the kernel commit: 478a351ce0d6).
[4]: https://syzkaller.appspot.com/bug?id=11d0e5f6fef53a0ea486bbd07ddd3cba66132150

So I wonder whether the `err_out` logic in isotp_sendmsg() is safe.
For me, it looks like isotp_sendmsg() can change so->tx.state to
ISTOP_IDLE at any time. It may not be a problem if all other locations
are aware of this. Is this an intended behavior?

Thank you in advance.


Best regards,
Dae R. Jeong