[PATCH net 7/7] net: dsa: mt7530: remove pad_setup function pointer

[arinc9 . unal]

From: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>

The pad_setup function pointer was introduced with 88bdef8be9f6 ("net: dsa:
mt7530: Extend device data ready for adding a new hardware"). It was being
used to set up the core clock and port 6 of the MT7530 switch, and pll of
the MT7531 switch.

All of these were moved to more appropriate locations so this function
pointer hasn't got a use anymore. Remove it.

Fixes: 88bdef8be9f6 ("net: dsa: mt7530: Extend device data ready for adding a new hardware")
Tested-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
---
 drivers/net/dsa/mt7530.c | 30 ++----------------------------
 drivers/net/dsa/mt7530.h |  3 ---
 2 files changed, 2 insertions(+), 31 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 8d49803f7522..83dcd888f82b 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -493,12 +493,6 @@ mt7530_setup_port6(struct dsa_switch *ds, phy_interface_t interface)
 	return 0;
 }
 
-static int
-mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
-{
-	return 0;
-}
-
 static bool mt7531_dual_sgmii_supported(struct mt7530_priv *priv)
 {
 	u32 val;
@@ -508,12 +502,6 @@ static bool mt7531_dual_sgmii_supported(struct mt7530_priv *priv)
 	return (val & PAD_DUAL_SGMII_EN) != 0;
 }
 
-static int
-mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface)
-{
-	return 0;
-}
-
 static void
 mt7531_pll_setup(struct mt7530_priv *priv)
 {
@@ -2516,14 +2504,6 @@ static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port,
 	}
 }
 
-static int
-mt753x_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state)
-{
-	struct mt7530_priv *priv = ds->priv;
-
-	return priv->info->pad_setup(ds, state->interface);
-}
-
 static int
 mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
 		  phy_interface_t interface)
@@ -2798,8 +2778,6 @@ mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
 		if (priv->p6_interface == state->interface)
 			break;
 
-		mt753x_pad_setup(ds, state);
-
 		if (mt753x_mac_config(ds, port, mode, state) < 0)
 			goto unsupported;
 
@@ -3215,7 +3193,6 @@ static const struct mt753x_info mt753x_table[] = {
 		.phy_write_c22 = mt7530_phy_write_c22,
 		.phy_read_c45 = mt7530_phy_read_c45,
 		.phy_write_c45 = mt7530_phy_write_c45,
-		.pad_setup = mt7530_pad_clk_setup,
 		.mac_port_get_caps = mt7530_mac_port_get_caps,
 		.mac_port_config = mt7530_mac_config,
 	},
@@ -3227,7 +3204,6 @@ static const struct mt753x_info mt753x_table[] = {
 		.phy_write_c22 = mt7530_phy_write_c22,
 		.phy_read_c45 = mt7530_phy_read_c45,
 		.phy_write_c45 = mt7530_phy_write_c45,
-		.pad_setup = mt7530_pad_clk_setup,
 		.mac_port_get_caps = mt7530_mac_port_get_caps,
 		.mac_port_config = mt7530_mac_config,
 	},
@@ -3239,7 +3215,6 @@ static const struct mt753x_info mt753x_table[] = {
 		.phy_write_c22 = mt7531_ind_c22_phy_write,
 		.phy_read_c45 = mt7531_ind_c45_phy_read,
 		.phy_write_c45 = mt7531_ind_c45_phy_write,
-		.pad_setup = mt7531_pad_setup,
 		.cpu_port_config = mt7531_cpu_port_config,
 		.mac_port_get_caps = mt7531_mac_port_get_caps,
 		.mac_port_config = mt7531_mac_config,
@@ -3297,9 +3272,8 @@ mt7530_probe(struct mdio_device *mdiodev)
 	/* Sanity check if these required device operations are filled
 	 * properly.
 	 */
-	if (!priv->info->sw_setup || !priv->info->pad_setup ||
-	    !priv->info->phy_read_c22 || !priv->info->phy_write_c22 ||
-	    !priv->info->mac_port_get_caps ||
+	if (!priv->info->sw_setup || !priv->info->phy_read_c22 ||
+	    !priv->info->phy_write_c22 || !priv->info->mac_port_get_caps ||
 	    !priv->info->mac_port_config)
 		return -EINVAL;
 
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 6b2fc6290ea8..fd050d3110c6 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -754,8 +754,6 @@ struct mt753x_pcs {
  * @phy_write_c22:	Holding the way writing PHY port using C22
  * @phy_read_c45:	Holding the way reading PHY port using C45
  * @phy_write_c45:	Holding the way writing PHY port using C45
- * @pad_setup:		Holding the way setting up the bus pad for a certain
- *			MAC port
  * @phy_mode_supported:	Check if the PHY type is being supported on a certain
  *			port
  * @mac_port_validate:	Holding the way to set addition validate type for a
@@ -776,7 +774,6 @@ struct mt753x_info {
 			    int regnum);
 	int (*phy_write_c45)(struct mt7530_priv *priv, int port, int devad,
 			     int regnum, u16 val);
-	int (*pad_setup)(struct dsa_switch *ds, phy_interface_t interface);
 	int (*cpu_port_config)(struct dsa_switch *ds, int port);
 	void (*mac_port_get_caps)(struct dsa_switch *ds, int port,
 				  struct phylink_config *config);
-- 
2.37.2