Re: [PATCH v5 2/2] arm64: dts: mediatek: enable i2c0 for mt8365-evk board

[AngeloGioacchino Del Regno]

Il 27/03/23 10:27, Alexandre Mergnat ha scritto:
> Enable the I2C0 bus provides communication with:
> - The integrated RT9466 Switching Battery Charger.
> - The integrated MT6691 LP4X buck for VDDQ.
> - The integrated MT6691 LP4X buck for VDD2.
> - The pin header, to plug external I2C devices.
>
> Signed-off-by: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
> ---
>   arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 16 ++++++++++++++++
>   1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> index 4683704ea235..35cb142004a4 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> @@ -87,6 +87,13 @@ optee_reserved: optee@43200000 {
>   	};
>   };
>   
> +&i2c0 {
> +	clock-frequency = <100000>;
> +	pinctrl-0 = <&i2c0_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +};
> +
>   &pio {
>   	gpio_keys: gpio-keys-pins {
>   		pins {
> @@ -96,6 +103,15 @@ pins {
>   		};
>   	};
>   
> +	i2c0_pins: i2c0-pins {
> +		pins {
			pinmux = ...pins...
			bias-pull-up = <your-pull-up-adv-value>;
		};

...and please do *not* use the mediatek,pull-up-adv property: this is
supposed to be there only for older devicetrees and there's a replacement
for it.... unless you have any specific reason to do so (and if you do,
you should well explain that).

Besides, if you introduce the usage of that property in any 8365 devicetree,
the previously proposed 8365 pinctrl cleanup will become a bit harder to do.

Cheers,
Angelo