Re: [PATCH v3 4/5] usb: cdns3: add StarFive JH7110 USB driver.

[Minda Chen]

On 2023/3/23 17:29, Philipp Zabel wrote:
> On Mi, 2023-03-15 at 18:44 +0800, Minda Chen wrote:
>> There is a Cadence USB3 core for JH7110 SoCs, the cdns
>> core is the child of this USB wrapper module device.
>> 
>> Signed-off-by: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
>> ---
> [...]
>> diff --git a/drivers/usb/cdns3/cdns3-starfive.c b/drivers/usb/cdns3/cdns3-starfive.c
>> new file mode 100644
>> index 000000000000..a99f98f85235
>> --- /dev/null
>> +++ b/drivers/usb/cdns3/cdns3-starfive.c
>> @@ -0,0 +1,305 @@
> [...]
>> +static int cdns_clk_rst_init(struct cdns_starfive *data)
>> +{
>> +	int ret;
>> +
>> +	data->num_clks = devm_clk_bulk_get_all(data->dev, &data->clks);
>> +	if (data->num_clks < 0)
>> +		return dev_err_probe(data->dev, -ENODEV,
>> +			"Failed to get clocks\n");
>> +
>> +	ret = clk_bulk_prepare_enable(data->num_clks, data->clks);
>> +	if (ret)
>> +		return dev_err_probe(data->dev, ret,
>> +			"failed to enable clocks\n");
> 
> In general, it's better to acquire all resources first and only then
> start interacting with them, and to order all devm_ calls before non-
> devm calls to make sure cleanup is done in reverse order.
> 
> In this case you can switch clk_bulk_prepare_enable() with
> devm_reset_control_array_get_exclusive() and simplify the error path.
> 
OK, thanks
>> +	data->resets = devm_reset_control_array_get_exclusive(data->dev);
>> +	if (IS_ERR(data->resets)) {
>> +		ret = dev_err_probe(data->dev, PTR_ERR(data->resets),
>> +			"Failed to get resets");
>> +		goto err_clk_init;
>> +	}
>> +
>> +	ret = reset_control_deassert(data->resets);
>> +	if (ret) {
>> +		ret = dev_err_probe(data->dev, ret,
>> +			"failed to reset clocks\n");
>> +		goto err_clk_init;
>> +	}
>> +
>> +	return ret;
>> +
>> +err_clk_init:
>> +	clk_bulk_disable_unprepare(data->num_clks, data->clks);
>> +	return ret;
>> +}
> 
> regards
> Philipp