[PATCH] dt-bindings: ata: Drop unneeded quotes

From: Rob Herring
Date: Mon Mar 27 2023 - 13:01:18 EST


Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.

Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
Documentation/devicetree/bindings/ata/ahci-common.yaml | 6 +++---
Documentation/devicetree/bindings/ata/ahci-platform.yaml | 2 +-
.../devicetree/bindings/ata/renesas,rcar-sata.yaml | 4 ++--
3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/ata/ahci-common.yaml b/Documentation/devicetree/bindings/ata/ahci-common.yaml
index 94d72aeaad0f..7fdf40954a4c 100644
--- a/Documentation/devicetree/bindings/ata/ahci-common.yaml
+++ b/Documentation/devicetree/bindings/ata/ahci-common.yaml
@@ -59,7 +59,7 @@ properties:
const: sata-phy

hba-cap:
- $ref: '/schemas/types.yaml#/definitions/uint32'
+ $ref: /schemas/types.yaml#/definitions/uint32
description:
Bitfield of the HBA generic platform capabilities like Staggered
Spin-up or Mechanical Presence Switch support. It can be used to
@@ -67,7 +67,7 @@ properties:
in case if the system firmware hasn't done it.

ports-implemented:
- $ref: '/schemas/types.yaml#/definitions/uint32'
+ $ref: /schemas/types.yaml#/definitions/uint32
description:
Mask that indicates which ports the HBA supports. Useful if PI is not
programmed by the BIOS, which is true for some embedded SoC's.
@@ -110,7 +110,7 @@ $defs:
description: Power regulator for SATA port target device

hba-port-cap:
- $ref: '/schemas/types.yaml#/definitions/uint32'
+ $ref: /schemas/types.yaml#/definitions/uint32
description:
Bitfield of the HBA port-specific platform capabilities like Hot
plugging, eSATA, FIS-based Switching, etc (see AHCI specification
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.yaml b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
index 7dc2a2e8f598..6d9e33276ba7 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.yaml
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
@@ -34,7 +34,7 @@ select:
- compatible

allOf:
- - $ref: "ahci-common.yaml#"
+ - $ref: ahci-common.yaml#

properties:
compatible:
diff --git a/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
index c4e4a9eab658..fe0909554790 100644
--- a/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
+++ b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/ata/renesas,rcar-sata.yaml#";
-$schema: "http://devicetree.org/meta-schemas/core.yaml#";
+$id: http://devicetree.org/schemas/ata/renesas,rcar-sata.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Renesas R-Car Serial-ATA Interface

--
2.39.2