Re: [PATCH v2 1/3] rtc: tps6594: add driver for TPS6594 PMIC RTC

[Esteban Blanc]

On Tue Mar 28, 2023 at 11:29 AM CEST, Alexandre Belloni wrote:
> Hello,
>
> On 28/03/2023 11:14:46+0200, Esteban Blanc wrote:
> > +	/* Start rtc */
> > +	ret = regmap_set_bits(tps->regmap, TPS6594_REG_RTC_CTRL_1,
> > +			      TPS6594_BIT_STOP_RTC);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	mdelay(100);
> > +
> > +	/*
> > +	 * RTC should be running now. Check if this is the case.
> > +	 * If not it might be a missing oscillator.
> > +	 */
> > +	ret = regmap_test_bits(tps->regmap, TPS6594_REG_RTC_STATUS,
> > +			       TPS6594_BIT_RUN);
> > +	if (ret < 0)
> > +		return ret;
> > +	if (ret == 0)
> > +		return -ENODEV;
> > +
> > +	/* Stop RTC until first call to `tps6594_rtc_set_time */
> > +	ret = regmap_clear_bits(tps->regmap, TPS6594_REG_RTC_CTRL_1,
> > +				TPS6594_BIT_STOP_RTC);
> > +	if (ret < 0)
> > +		return ret;
> > +
>
> This whole block must not be executed when the RTC is already running,
> else, you are stopping a perfectly running RTC.

I'm not sure to get your point. You mean that during probe, the driver
might encounter an RTC device that is already running with a correct
timestamp? How would this be possible? A previous bootstage or the
driver was removed then re-inserted again?

Thanks for your time,

-- 
Esteban Blanc
BayLibre