Re: [PATCH] perf/arm-cmn: Fix and refactor device mapping resource
From: Jing Zhang
Date: Wed Mar 29 2023 - 05:48:34 EST
在 2023/3/27 下午10:27, Robin Murphy 写道:
> On 2023-03-27 15:05, Will Deacon wrote:
>> [+Robin and Ilkka, as they contribute most to this driver]
>>
>> On Thu, Feb 16, 2023 at 04:17:50PM +0800, Jing Zhang wrote:
>>> The devm_platform_ioremap_resource() won't let the platform device
>>> claim resource when the ACPI companion device has already claimed it.
>>> If CMN-ANY except CMN600 is ACPI companion device, it will return
>>> -EBUSY in devm_platform_ioremap_resource(), and the driver cannot be
>>> successfully installed.
>>>
>>> So let ACPI companion device call arm_cmn_acpi_probe and not claim
>>> resource again. In addition, the arm_cmn_acpi_probe() and
>>> arm_cmn_of_probe() functions are refactored to make them compatible
>>> with both CMN600 and CMN-ANY.
>
> No, the whole point of CMN-600 probing being a special case is that the ACPI and DT bindings for CMN-600 are special cases. In ACPI, only ARMHC600 has the two nested memory resources; all the other models should only have one memory resource because one is all that is meaningful. See table 16 the document[1] in where the description of ROOTNODEBASE says "This field is specific to the CMN-600 device object."
>
> Similarly in DT, "arm,root-node" is only required for "arm,cmn-600" - it didn't seem worth overcomplicating the schema to actively disallow it for other models, but that is supposed to be implied by its description as "not relevant for newer CMN/CI products".
>
> If you're hitting this because you've written your ACPI DSDT incorrectly, it's a sign that you should fix your DSDT.
>
> Thanks,
> Robin.
>
> [1] https://developer.arm.com/documentation/den0093/latest/
>
Hi Robin,
Yes, I know what you mean, but if a new CMN PMU device design two resources like CMN600, it will fail to load driver.
the specification doesn't explicitly forbid giving two ranges for CMN700 although the example shows just one.
So in our SoC, CMN700 is designed with two resources similar to CMN600, and the overlap of resource addresses makes
the CMN driver unable to match my CMN700. The error log:
[ 12.016837] arm-cmn ARMHC700:00: can't request region for resource [mem 0x40000000-0x4fffffff]
[ 12.028230] arm-cmn: probe of ARMHC700:00 failed with error -16
[ 12.036832] arm-cmn ARMHC700:01: can't request region for resource [mem 0x40040000000-0x4004fffffff]
[ 12.051289] arm-cmn: probe of ARMHC700:01 failed with error -16
So this patch can compatible devices which has two memory resources and one memory resource, why not do it?
I resend this patch before and add more information about it. This patch still needs to be perfected,
I will improve it in the next version.
Link: https://lore.kernel.org/all/1679587838-80000-1-git-send-email-renyu.zj@xxxxxxxxxxxxxxxxx/
Thanks,
Jing
>>> Fixes: 61ec1d875812 ("perf/arm-cmn: Demarcate CMN-600 specifics")
>>> Signed-off-by: Jing Zhang <renyu.zj@xxxxxxxxxxxxxxxxx>
>>> ---
>>> drivers/perf/arm-cmn.c | 57 ++++++++++++++++++++++++++++++++------------------
>>> 1 file changed, 37 insertions(+), 20 deletions(-)
>>>
>>> diff --git a/drivers/perf/arm-cmn.c b/drivers/perf/arm-cmn.c
>>> index 1deb61b..beb3b37 100644
>>> --- a/drivers/perf/arm-cmn.c
>>> +++ b/drivers/perf/arm-cmn.c
>>> @@ -2206,7 +2206,7 @@ static int arm_cmn_discover(struct arm_cmn *cmn, unsigned int rgn_offset)
>>> return 0;
>>> }
>>> -static int arm_cmn600_acpi_probe(struct platform_device *pdev, struct arm_cmn *cmn)
>>> +static int arm_cmn_acpi_probe(struct platform_device *pdev, struct arm_cmn *cmn)
>>> {
>>> struct resource *cfg, *root;
>>> @@ -2214,12 +2214,21 @@ static int arm_cmn600_acpi_probe(struct platform_device *pdev, struct arm_cmn *c
>>> if (!cfg)
>>> return -EINVAL;
>>> - root = platform_get_resource(pdev, IORESOURCE_MEM, 1);
>>> - if (!root)
>>> - return -EINVAL;
>>> + /* If ACPI defines more than one resource, such as cmn-600, then there may be
>>> + * a deviation between ROOTNODEBASE and PERIPHBASE, and ROOTNODEBASE can
>>> + * be obtained from the second resource. Otherwise, it can be considered that
>>> + * ROOT NODE BASE is PERIPHBASE. This is compatible with cmn-600 and cmn-any.
>>> + */
>>> + if (pdev->num_resources > 1) {
>>> + root = platform_get_resource(pdev, IORESOURCE_MEM, 1);
>>> + if (!root)
>>> + return -EINVAL;
>>> - if (!resource_contains(cfg, root))
>>> - swap(cfg, root);
>>> + if (!resource_contains(cfg, root))
>>> + swap(cfg, root);
>>> + } else {
>>> + root = cfg;
>>> + }
>>> /*
>>> * Note that devm_ioremap_resource() is dumb and won't let the platform
>>> * device claim cfg when the ACPI companion device has already claimed
>>> @@ -2227,17 +2236,30 @@ static int arm_cmn600_acpi_probe(struct platform_device *pdev, struct arm_cmn *c
>>> * appropriate name, we don't really need to do it again here anyway.
>>> */
>>> cmn->base = devm_ioremap(cmn->dev, cfg->start, resource_size(cfg));
>>> - if (!cmn->base)
>>> - return -ENOMEM;
>>> + if (IS_ERR(cmn->base))
>>> + return PTR_ERR(cmn->base);
>>> return root->start - cfg->start;
>>> }
>>> -static int arm_cmn600_of_probe(struct device_node *np)
>>> +static int arm_cmn_of_probe(struct platform_device *pdev, struct arm_cmn *cmn)
>>> {
>>> u32 rootnode;
>>> + int ret;
>>> +
>>> + cmn->base = devm_platform_ioremap_resource(pdev, 0);
>>> + if (IS_ERR(cmn->base))
>>> + return PTR_ERR(cmn->base);
>>> - return of_property_read_u32(np, "arm,root-node", &rootnode) ?: rootnode;
>>> + /* If of_property_read_u32() return EINVAL, it means that device tree has
>>> + * not define root-node, and root-node will return 0, which is compatible
>>> + * with cmn-600 and cmn-any.
>>> + */
>>> + ret = of_property_read_u32(pdev->dev.of_node, "arm,root-node", &rootnode);
>>> + if (ret == -EINVAL)
>>> + return 0;
>>> +
>>> + return rootnode;
>>> }
>>> static int arm_cmn_probe(struct platform_device *pdev)
>>> @@ -2255,16 +2277,11 @@ static int arm_cmn_probe(struct platform_device *pdev)
>>> cmn->model = (unsigned long)device_get_match_data(cmn->dev);
>>> platform_set_drvdata(pdev, cmn);
>>> - if (cmn->model == CMN600 && has_acpi_companion(cmn->dev)) {
>>> - rootnode = arm_cmn600_acpi_probe(pdev, cmn);
>>> - } else {
>>> - rootnode = 0;
>>> - cmn->base = devm_platform_ioremap_resource(pdev, 0);
>>> - if (IS_ERR(cmn->base))
>>> - return PTR_ERR(cmn->base);
>>> - if (cmn->model == CMN600)
>>> - rootnode = arm_cmn600_of_probe(pdev->dev.of_node);
>>> - }
>>> + if (has_acpi_companion(cmn->dev))
>>> + rootnode = arm_cmn_acpi_probe(pdev, cmn);
>>> + else
>>> + rootnode = arm_cmn_of_probe(pdev, cmn);
>>> +
>>> if (rootnode < 0)
>>> return rootnode;
>>> --
>>> 1.8.3.1
>>>