[PATCH] clk: imx: composite-7ulp: Add some delay before deassert the reset

[Peng Fan (OSS)]

From: Jacky Bai <ping.bai@xxxxxxx>

Some of the PCCs on i.MX8ULP have a sw_rst bit to control
the peripheral reset through SW method. For peripherals like GPU
that need sync reset, some delay is necessary befere & after release
the reset to make sure the HW is reset into known status. So add
some delay before & after release reset.

This change will not impact i.MX7ULP function

Reviewed-by: Peng Fan <peng.fan@xxxxxxx>
Signed-off-by: Jacky Bai <ping.bai@xxxxxxx>
Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
---
 drivers/clk/imx/clk-composite-7ulp.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/clk/imx/clk-composite-7ulp.c b/drivers/clk/imx/clk-composite-7ulp.c
index 4eedd45dbaa8..f9fe968bd900 100644
--- a/drivers/clk/imx/clk-composite-7ulp.c
+++ b/drivers/clk/imx/clk-composite-7ulp.c
@@ -7,6 +7,7 @@
 
 #include <linux/bits.h>
 #include <linux/clk-provider.h>
+#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/slab.h>
@@ -37,6 +38,9 @@ static int pcc_gate_enable(struct clk_hw *hw)
 	if (ret)
 		return ret;
 
+	/* wait before release reset */
+	udelay(1);
+
 	spin_lock_irqsave(gate->lock, flags);
 	/*
 	 * release the sw reset for peripherals associated with
@@ -48,6 +52,9 @@ static int pcc_gate_enable(struct clk_hw *hw)
 
 	spin_unlock_irqrestore(gate->lock, flags);
 
+	/* wait sync reset done */
+	udelay(1);
+
 	return 0;
 }
 
-- 
2.37.1