Re: [PATCH v7 5/6] cache: Add L2 cache management for Andes AX45MP RISC-V core

[Conor Dooley]

On Thu, Mar 30, 2023 at 09:42:16PM +0100, Prabhakar wrote:

> +STANDALONE CACHE CONTROLLER DRIVERS

> +F:	include/cache

This can go since the file no longer exists.

> +config AX45MP_L2_CACHE
> +	bool "Andes Technology AX45MP L2 Cache controller"
> +	depends on RISCV && RISCV_DMA_NONCOHERENT

This can just be depends on RISCV_DMA_NONCOHERENT, since that's only
defined on RISC-V.

> +static void ax45mp_get_l2_line_size(struct platform_device *pdev)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	struct device *dev = &pdev->dev;
> +	int ret;
> +
> +	ret = of_property_read_u32(np, "cache-line-size", &ax45mp_priv->ax45mp_cache_line_size);
> +	if (ret) {
> +		dev_err(dev, "Failed to get cache-line-size, defaulting to 64 bytes\n");
> +		ax45mp_priv->ax45mp_cache_line_size = AX45MP_CACHE_LINE_SIZE;
> +	}
> +
> +	if (ax45mp_priv->ax45mp_cache_line_size != AX45MP_CACHE_LINE_SIZE) {
> +		dev_err(dev, "Expected cache-line-size to be 64 bytes (found:%u). Defaulting to 64 bytes\n",
> +			ax45mp_priv->ax45mp_cache_line_size);
> +		ax45mp_priv->ax45mp_cache_line_size = AX45MP_CACHE_LINE_SIZE;
> +	}

I forget, why are we doing this defaulting rather than falling over
immediately if we detect the property is missing or wrong?

> +}

> +static const struct riscv_cache_ops ax45mp_cmo_ops = {
> +	.clean_range = &ax45mp_cpu_dma_wb_range,
> +	.inv_range = &ax45mp_cpu_dma_inval_range,
> +	.flush_range = &ax45mp_cpu_dma_flush_range,
> +};

I think it would be nice if your driver functions matched the names used
by the ops. (and as I said on the other patch, I think the ops should
match the cross-arch naming.

Otherwise, looks grand - although I think I was mostly happy with the
last revision too.a

Cheers,
Conor.

Attachment: signature.asc
Description: PGP signature