[PATCH 2/2] ARM: dts: qcom: sdx55-fn980: Move "status" property to the end of node

[Manivannan Sadhasivam]

To align with rest of the devicetree files, let's move the "status"
property to the end of the nodes.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 .../boot/dts/qcom-sdx55-telit-fn980-tlb.dts   | 20 ++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
index b73b707342af..91d13c40496c 100644
--- a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
+++ b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts
@@ -243,21 +243,21 @@ &ipa {
 };
 
 &pcie_phy {
-	status = "okay";
-
 	vdda-phy-supply = <&vreg_l1e_bb_1p2>;
 	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
-};
 
-&pcie_ep {
 	status = "okay";
+};
 
+&pcie_ep {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_ep_clkreq_default &pcie_ep_perst_default
 		     &pcie_ep_wake_default>;
 
 	reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
 };
 
 &qpic_bam {
@@ -265,8 +265,6 @@ &qpic_bam {
 };
 
 &qpic_nand {
-	status = "okay";
-
 	nand@0 {
 		reg = <0>;
 
@@ -277,11 +275,13 @@ nand@0 {
 		secure-regions = /bits/ 64 <0x500000 0x500000
 					    0xa00000 0xb00000>;
 	};
+
+	status = "okay";
 };
 
 &remoteproc_mpss {
-	status = "okay";
 	memory-region = <&mpss_adsp_mem>;
+	status = "okay";
 };
 
 &tlmm {
@@ -308,16 +308,18 @@ pcie_ep_wake_default: pcie-ep-wake-default-state {
 };
 
 &usb_hsphy {
-	status = "okay";
 	vdda-pll-supply = <&vreg_l4e_bb_0p875>;
 	vdda33-supply = <&vreg_l10e_3p1>;
 	vdda18-supply = <&vreg_l5e_bb_1p7>;
+
+	status = "okay";
 };
 
 &usb_qmpphy {
-	status = "okay";
 	vdda-phy-supply = <&vreg_l4e_bb_0p875>;
 	vdda-pll-supply = <&vreg_l1e_bb_1p2>;
+
+	status = "okay";
 };
 
 &usb {
-- 
2.25.1