Re: [PATCH -next V17 4/7] riscv: entry: Convert to generic entry
From: Conor Dooley
Date: Fri Mar 31 2023 - 14:56:06 EST
On Fri, Mar 31, 2023 at 08:46:44PM +0200, Heiko Stübner wrote:
> Hi,
>
> Am Freitag, 31. März 2023, 20:41:35 CEST schrieb Conor Dooley:
> > On Fri, Mar 31, 2023 at 07:34:38PM +0100, Conor Dooley wrote:
> > > On Tue, Feb 21, 2023 at 10:30:18PM -0500, guoren@xxxxxxxxxx wrote:
> > > > From: Guo Ren <guoren@xxxxxxxxxxxxxxxxx>
> > > >
> > > > This patch converts riscv to use the generic entry infrastructure from
> > > > kernel/entry/*. The generic entry makes maintainers' work easier and
> > > > codes more elegant. Here are the changes:
> > > >
> > > > - More clear entry.S with handle_exception and ret_from_exception
> > > > - Get rid of complex custom signal implementation
> > > > - Move syscall procedure from assembly to C, which is much more
> > > > readable.
> > > > - Connect ret_from_fork & ret_from_kernel_thread to generic entry.
> > > > - Wrap with irqentry_enter/exit and syscall_enter/exit_from_user_mode
> > > > - Use the standard preemption code instead of custom
> > >
> > > This has unfortunately broken booting my usual NFS rootfs on both my D1
> > > and Icicle. It's one of the Fedora images from David, I think this one:
> > > http://fedora.riscv.rocks/kojifiles/work/tasks/3933/1313933/
> > >
> > > It gets pretty far into things, it's once systemd is operational that
> > > things go pear shaped:
> >
> > Shoulda said, can share the full logs if required of course, but they're
> > quite verbose cos systemd etc.
>
> I was just investigating the same thing just now. So that saves me some
> tracking down the culprit :-) .
>
> My main qemu is living as a "board" in my boardfarm (also doing nfsroot)
> as well as my d1 nezha with nfsroot was affected.
>
> Though my board is stuck in some failure loop with both the journal- as
> well as the timesyncd service failing again and again. And I haven't
> figured out how to get logs without a working login console yet.
I'll attach the full output from a run I guess. journald fails ad
infinitum for me too after I cut this log off.
Cheers,
Conor.
[ 0.000000] Linux version 6.3.0-rc2-gd5e0396cf8bf-dirty (conor@spud) (ClangBuiltLinux clang version 15.0.7 (/stuff/brsdk/llvm/clang 8dfdcc7b7bf66834a761bd8de445840ef68e4d1a), ClangBuiltLinux LLD 15.0.7) #1 SMP PREEMPT @7
[ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
[ 0.000000] Machine model: Microchip PolarFire-SoC Icicle Kit
[ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000020000000 (options '115200n8')
[ 0.000000] printk: bootconsole [ns16550a0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'region@BFC00000': base 0x00000000bfc00000, size 4 MiB
[ 0.000000] OF: reserved mem: 0x00000000bfc00000..0x00000000bfffffff (4096 KiB) nomap non-reusable region@BFC00000
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000080200000-0x00000000bfffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080200000-0x00000000bfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x00000000bfffffff]
[ 0.000000] On node 0, zone DMA32: 512 pages in unavailable ranges
[ 0.000000] SBI specification v0.3 detected
[ 0.000000] SBI implementation ID=0x1 Version=0x10000
[ 0.000000] SBI TIME extension detected
[ 0.000000] SBI IPI extension detected
[ 0.000000] SBI RFENCE extension detected
[ 0.000000] SBI SRST extension detected
[ 0.000000] SBI HSM extension detected
[ 0.000000] CPU with hartid=0 is not available
[ 0.000000] CPU with hartid=0 is not available
[ 0.000000] CPU with hartid=0 is not available
[ 0.000000] riscv: base ISA extensions acdfim
[ 0.000000] riscv: ELF capabilities acdfim
[ 0.000000] percpu: Embedded 29 pages/cpu s79648 r8192 d30944 u118784
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258055
[ 0.000000] Kernel command line: root=/dev/nfs rw ip=dhcp nfsroot=99.99.99.5:/stuff/nfs_share,tcp,v3 rdinit=/usr/sbin/init rootwait=10 earlycon
[ 0.000000] Unknown kernel command line parameters "rootwait=10", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] stackdepot: allocating hash table via alloc_large_system_hash
[ 0.000000] stackdepot hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] fixmap : 0xffffffc6fee00000 - 0xffffffc6ff000000 (2048 kB)
[ 0.000000] pci io : 0xffffffc6ff000000 - 0xffffffc700000000 ( 16 MB)
[ 0.000000] vmemmap : 0xffffffc700000000 - 0xffffffc800000000 (4096 MB)
[ 0.000000] vmalloc : 0xffffffc800000000 - 0xffffffd800000000 ( 64 GB)
[ 0.000000] modules : 0xffffffff0305f000 - 0xffffffff80000000 (1999 MB)
[ 0.000000] lowmem : 0xffffffd800000000 - 0xffffffd83fe00000 (1022 MB)
[ 0.000000] kasan : 0xfffffff700000000 - 0xffffffff00000000 ( 32 GB)
[ 0.000000] kernel : 0xffffffff80000000 - 0xffffffffffffffff (2047 MB)
[ 0.000000] Memory: 545616K/1046528K available (16518K kernel code, 8042K rwdata, 8192K rodata, 2303K init, 12559K bss, 500912K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] trace event string verifier disabled
[ 0.000000] Running RCU self tests
[ 0.000000] Running RCU synchronous self tests
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU lockdep checking is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] rcu: RCU debug extended QS entry/exit.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] Running RCU synchronous self tests
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] CPU with hartid=0 is not available
[ 0.000000] riscv-intc: unable to find hart id for /cpus/cpu@0/interrupt-controller
[ 0.000000] riscv-intc: 64 local interrupts mapped
[ 0.000000] plic: interrupt-controller@c000000: mapped 186 interrupts with 4 handlers for 9 contexts.
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] riscv-timer: riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [1]
[ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns
[ 0.000006] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps every 2199023255500ns
[ 0.015372] Console: colour dummy device 80x25
[ 0.020991] printk: console [tty0] enabled
[ 0.026672] printk: bootconsole [ns16550a0] disabled
[ 0.000000] Linux version 6.3.0-rc2-gd5e0396cf8bf-dirty (conor@spud) (ClangBuiltLinux clang version 15.0.7 (/stuff/brsdk/llvm/clang 8dfdcc7b7bf66834a761bd8de445840ef68e4d1a), ClangBuiltLinux LLD 15.0.7) #1 SMP PREEMPT @7
[ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
[ 0.000000] Machine model: Microchip PolarFire-SoC Icicle Kit
[ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000020000000 (options '115200n8')
[ 0.000000] printk: bootconsole [ns16550a0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'region@BFC00000': base 0x00000000bfc00000, size 4 MiB
[ 0.000000] OF: reserved mem: 0x00000000bfc00000..0x00000000bfffffff (4096 KiB) nomap non-reusable region@BFC00000
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000080200000-0x00000000bfffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080200000-0x00000000bfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x00000000bfffffff]
[ 0.000000] On node 0, zone DMA32: 512 pages in unavailable ranges
[ 0.000000] SBI specification v0.3 detected
[ 0.000000] SBI implementation ID=0x1 Version=0x10000
[ 0.000000] SBI TIME extension detected
[ 0.000000] SBI IPI extension detected
[ 0.000000] SBI RFENCE extension detected
[ 0.000000] SBI SRST extension detected
[ 0.000000] SBI HSM extension detected
[ 0.000000] CPU with hartid=0 is not available
[ 0.000000] CPU with hartid=0 is not available
[ 0.000000] CPU with hartid=0 is not available
[ 0.000000] riscv: base ISA extensions acdfim
[ 0.000000] riscv: ELF capabilities acdfim
[ 0.000000] percpu: Embedded 29 pages/cpu s79648 r8192 d30944 u118784
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258055
[ 0.000000] Kernel command line: root=/dev/nfs rw ip=dhcp nfsroot=99.99.99.5:/stuff/nfs_share,tcp,v3 rdinit=/usr/sbin/init rootwait=10 earlycon
[ 0.000000] Unknown kernel command line parameters "rootwait=10", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] stackdepot: allocating hash table via alloc_large_system_hash
[ 0.000000] stackdepot hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] fixmap : 0xffffffc6fee00000 - 0xffffffc6ff000000 (2048 kB)
[ 0.000000] pci io : 0xffffffc6ff000000 - 0xffffffc700000000 ( 16 MB)
[ 0.000000] vmemmap : 0xffffffc700000000 - 0xffffffc800000000 (4096 MB)
[ 0.000000] vmalloc : 0xffffffc800000000 - 0xffffffd800000000 ( 64 GB)
[ 0.000000] modules : 0xffffffff0305f000 - 0xffffffff80000000 (1999 MB)
[ 0.000000] lowmem : 0xffffffd800000000 - 0xffffffd83fe00000 (1022 MB)
[ 0.000000] kasan : 0xfffffff700000000 - 0xffffffff00000000 ( 32 GB)
[ 0.000000] kernel : 0xffffffff80000000 - 0xffffffffffffffff (2047 MB)
[ 0.000000] Memory: 545616K/1046528K available (16518K kernel code, 8042K rwdata, 8192K rodata, 2303K init, 12559K bss, 500912K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] trace event string verifier disabled
[ 0.000000] Running RCU self tests
[ 0.000000] Running RCU synchronous self tests
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU lockdep checking is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] rcu: RCU debug extended QS entry/exit.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] Running RCU synchronous self tests
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] CPU with hartid=0 is not available
[ 0.000000] riscv-intc: unable to find hart id for /cpus/cpu@0/interrupt-controller
[ 0.000000] riscv-intc: 64 local interrupts mapped
[ 0.000000] plic: interrupt-controller@c000000: mapped 186 interrupts with 4 handlers for 9 contexts.
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] riscv-timer: riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [1]
[ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 3526361616960 ns
[ 0.000006] sched_clock: 64 bits at 1000kHz, resolution 1000ns, wraps every 2199023255500ns
[ 0.015372] Console: colour dummy device 80x25
[ 0.020991] printk: console [tty0] enabled
[ 0.026672] printk: bootconsole [ns16550a0] disabled
[ 0.033749] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.035065] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.035844] ... MAX_LOCK_DEPTH: 48
[ 0.036633] ... MAX_LOCKDEP_KEYS: 8192
[ 0.037658] ... CLASSHASH_SIZE: 4096
[ 0.038478] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.039307] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.040135] ... CHAINHASH_SIZE: 32768
[ 0.040963] memory used by lock dependency info: 6365 kB
[ 0.042130] memory used for stack traces: 4224 kB
[ 0.043012] per task-struct memory footprint: 1920 bytes
[ 0.044452] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=4000)
[ 0.046447] pid_max: default: 32768 minimum: 301
[ 0.052917] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.054369] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.084506] Running RCU synchronous self tests
[ 0.085686] Running RCU synchronous self tests
[ 0.095405] CPU node for /cpus/cpu@0 exist but the possible cpu range is :0-3
[ 0.130236] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.133050] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.137669] cblist_init_generic: Setting shift to 2 and lim to 1.
[ 0.142192] Running RCU-tasks wait API self tests
[ 0.263638] riscv: ELF compat mode unsupported
[ 0.263807] ASID allocator disabled (0 bits)
[ 0.270226] Callback from call_rcu_tasks_trace() invoked.
[ 0.272903] rcu: Hierarchical SRCU implementation.
[ 0.274289] rcu: Max phase no-delay instances is 1000.
[ 0.302638] EFI services will not be available.
[ 0.315637] smp: Bringing up secondary CPUs ...
[ 0.396166] smp: Brought up 1 node, 4 CPUs
[ 0.422047] devtmpfs: initialized
[ 0.490692] Callback from call_rcu_tasks() invoked.
[ 0.681118] Running RCU synchronous self tests
[ 0.682861] Running RCU synchronous self tests
[ 0.691211] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.693981] futex hash table entries: 1024 (order: 5, 131072 bytes, linear)
[ 0.702882] pinctrl core: initialized pinctrl subsystem
[ 0.744067] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.758314] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[ 0.761255] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.795383] cpuidle: using governor menu
[ 1.272427] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 1.274292] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 1.411012] SCSI subsystem initialized
[ 1.431885] usbcore: registered new interface driver usbfs
[ 1.435740] usbcore: registered new interface driver hub
[ 1.439351] usbcore: registered new device driver usb
[ 1.462261] FPGA manager framework
[ 1.512290] vgaarb: loaded
[ 1.519890] clocksource: Switched to clocksource riscv_clocksource
[ 2.009122] NET: Registered PF_INET protocol family
[ 2.016053] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 2.052865] tcp_listen_portaddr_hash hash table entries: 512 (order: 3, 36864 bytes, linear)
[ 2.056616] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 2.059500] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 2.072933] TCP bind hash table entries: 8192 (order: 8, 1179648 bytes, linear)
[ 2.113517] TCP: Hash tables configured (established 8192 bind 8192)
[ 2.120319] UDP hash table entries: 512 (order: 4, 81920 bytes, linear)
[ 2.125390] UDP-Lite hash table entries: 512 (order: 4, 81920 bytes, linear)
[ 2.136344] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 2.161084] RPC: Registered named UNIX socket transport module.
[ 2.162843] RPC: Registered udp transport module.
[ 2.164402] RPC: Registered tcp transport module.
[ 2.165631] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.167599] PCI: CLS 0 bytes, default 64
[ 2.190148] Unpacking initramfs...
[ 2.251957] workingset: timestamp_bits=62 max_order=18 bucket_order=0
[ 2.296023] NFS: Registering the id_resolver key type
[ 2.299423] Key type id_resolver registered
[ 2.300826] Key type id_legacy registered
[ 2.303490] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 2.305408] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 2.314304] 9p: Installing v9fs 9p2000 file system support
[ 2.330388] NET: Registered PF_ALG protocol family
[ 2.335558] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 2.337681] io scheduler mq-deadline registered
[ 2.338886] io scheduler kyber registered
[ 2.341159] io scheduler bfq registered
[ 13.013052] String selftests succeeded
[ 13.014173] test_string_helpers: Running tests...
[ 13.386804] CCACHE: DataError @ 0x00000000.0807FFF8
[ 13.391444] CCACHE: DataFail @ 0x00000000.0807FFF0
[ 13.397053] CCACHE: 4 banks, 16 ways, sets/bank=512, bytes/block=64
[ 13.398602] CCACHE: Index of the largest way enabled: 11
[ 16.037879] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 16.149343] 20000000.serial: ttyS0 at MMIO 0x20000000 (irq = 15, base_baud = 9375000) is a 16550A
[ 16.156089] printk: console [ttyS0] enabled
[ 17.265279] 20100000.serial: ttyS1 at MMIO 0x20100000 (irq = 16, base_baud = 9375000) is a 16550A
[ 17.327497] 20102000.serial: ttyS2 at MMIO 0x20102000 (irq = 17, base_baud = 9375000) is a 16550A
[ 17.389076] 20104000.serial: ttyS3 at MMIO 0x20104000 (irq = 18, base_baud = 9375000) is a 16550A
[ 17.426517] of_serial: probe of 20106000.serial failed with error -28
[ 17.916595] loop: module loaded
[ 17.964831] zram: Added device: zram0
[ 18.086264] microchip-corespi 20108000.spi: Registered SPI controller 0
[ 18.121095] microchip-corespi 20109000.spi: Registered SPI controller 1
[ 18.203919] spi-nor spi3.0: w25q128 (16384 Kbytes)
[ 21.169496] Freeing initrd memory: 15668K
[ 21.395452] macb 20110000.ethernet eth0: Cadence GEM rev 0x0107010c at 0x20110000 irq 23 (00:04:a3:41:d0:fd)
[ 21.412679] e1000e: Intel(R) PRO/1000 Network Driver
[ 21.419777] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 21.460117] usbcore: registered new interface driver uas
[ 21.469638] usbcore: registered new interface driver usb-storage
[ 21.524504] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 21.540183] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[ 21.610837] hub 1-0:1.0: USB hub found
[ 21.621142] hub 1-0:1.0: 1 port detected
[ 21.680372] mpfs-musb 20201000.usb: Registered MPFS MUSB driver
[ 21.702517] mousedev: PS/2 mouse device common for all mice
[ 21.724021] i2c_dev: i2c /dev entries driver
[ 21.763554] microchip-corei2c 2010a000.i2c: registered CoreI2C bus driver
[ 21.797752] microchip-corei2c 2010b000.i2c: registered CoreI2C bus driver
[ 21.852615] sdhci: Secure Digital Host Controller Interface driver
[ 21.860773] sdhci: Copyright(c) Pierre Ossman
[ 21.868727] sdhci-pltfm: SDHCI platform and OF driver helper
[ 21.895884] usbcore: registered new interface driver usbhid
[ 21.902221] usbhid: USB HID core driver
[ 21.936265] mpfs-mailbox 37020000.mailbox: Registered MPFS mailbox controller driver
[ 21.966319] riscv-pmu-sbi: SBI PMU extension is available
[ 21.973922] riscv-pmu-sbi: 15 firmware and 4 hardware counters
[ 21.981727] riscv-pmu-sbi: Perf sampling/filtering is not supported as sscof extension is not available
[ 21.996006] mmc0: SDHCI controller on 20008000.mmc [20008000.mmc] using ADMA 64-bit
[ 22.032435] NET: Registered PF_INET6 protocol family
[ 22.080829] Segment Routing with IPv6
[ 22.087604] In-situ OAM (IOAM) with IPv6
[ 22.094555] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 22.132241] NET: Registered PF_PACKET protocol family
[ 22.143837] 9pnet: Installing 9P2000 support
[ 22.145445] mmc0: new HS200 MMC card at address 0001
[ 22.160350] Key type dns_resolver registered
[ 22.198172] mmcblk0: mmc0:0001 TB2916 14.6 GiB
[ 22.359675] mmcblk0boot0: mmc0:0001 TB2916 4.00 MiB
[ 22.472842] mmcblk0boot1: mmc0:0001 TB2916 4.00 MiB
[ 22.574290] mmcblk0rpmb: mmc0:0001 TB2916 4.00 MiB, chardev (242:0)
[ 23.619821] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers
[ 23.910330] mpfs-sys-controller syscontroller: Registered MPFS system controller
[ 23.955403] random: crng init done
[ 23.961736] mpfs-rng mpfs-rng: Registered MPFS hwrng
[ 24.040123] macb 20110000.ethernet eth0: PHY [20110000.ethernet-ffffffff:00] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
[ 24.055924] macb 20110000.ethernet eth0: configuring for phy/sgmii link mode
[ 28.254478] macb 20110000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 28.266341] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 28.275892] Sending DHCP requests ., OK
[ 28.306175] IP-Config: Got DHCP answer from 99.99.99.1, my address is 99.99.99.97
[ 28.316744] IP-Config: Complete:
[ 28.321357] device=eth0, hwaddr=00:04:a3:41:d0:fd, ipaddr=99.99.99.97, mask=255.255.255.0, gw=99.99.99.1
[ 28.334209] host=99.99.99.97, domain=, nis-domain=(none)
[ 28.341874] bootserver=99.99.99.1, rootserver=99.99.99.5, rootpath=
[ 28.342051] nameserver0=99.99.99.1
[ 28.684402] VFS: Mounted root (nfs filesystem) on device 0:16.
[ 28.708272] devtmpfs: mounted
[ 28.747831] Freeing unused kernel image (initmem) memory: 2300K
[ 28.757755] Run /sbin/init as init process
[ 39.469486] systemd[1]: System time before build time, advancing clock.
[ 41.382394] systemd[1]: systemd v246.15-1.0.riscv64.fc33 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 41.432906] systemd[1]: Detected architecture riscv64.
Welcome to [0;34mFedora 33 (Rawhide)[0m!
[ 41.587681] systemd[1]: Set hostname to <fedora-riscv>.
[ 50.761418] systemd-sysv-generator[95]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 51.527913] zram_generator::generator[97]: Creating dev-zram0.swap for /dev/zram0 (275MB)
[ 57.964444] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-udev.service:27: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 57.993549] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-udev.service:28: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[ 58.053419] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-trigger.service:23: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 58.081477] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-trigger.service:24: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[ 58.145535] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-pivot.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 58.174372] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-pivot.service:31: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[ 58.447602] systemd[1]: /usr/lib/systemd/system/gssproxy.service:13: PIDFile= references a path below legacy directory /var/run/, updating /var/run/gssproxy.pid → /run/gssproxy.pid; please update the unit file accordingly.
[ 59.596376] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-mount.service:22: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 59.624034] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-mount.service:23: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[ 59.682316] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-mount.service:22: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 59.709969] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-mount.service:23: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[ 59.766799] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-initqueue.service:24: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 59.795713] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-initqueue.service:25: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[ 59.854333] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-cmdline.service:26: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 59.882177] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-cmdline.service:27: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[ 63.677176] systemd[1]: /usr/lib/systemd/system/ip6tables.service:14: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 63.702465] systemd[1]: /usr/lib/systemd/system/ip6tables.service:15: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 63.755847] systemd[1]: /usr/lib/systemd/system/iptables.service:14: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 63.780923] systemd[1]: /usr/lib/systemd/system/iptables.service:15: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 64.176567] systemd[1]: Queued start job for default target Graphical Interface.
[ 64.280125] systemd[1]: Created slice Slice /system/getty.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/getty[0m.
[ 64.354451] systemd[1]: Created slice Slice /system/modprobe.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/modprobe[0m.
[ 64.419976] systemd[1]: Created slice Slice /system/serial-getty.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/serial-getty[0m.
[ 64.488102] systemd[1]: Created slice Slice /system/sshd-keygen.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/sshd-keygen[0m.
[ 64.554661] systemd[1]: Created slice Slice /system/swap-create.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/swap-create[0m.
[ 64.621316] systemd[1]: Created slice User and Session Slice.
[[0;32m OK [0m] Created slice [0;1;39mUser and Session Slice[0m.
[ 64.678839] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[[0;32m OK [0m] Started [0;1;39mForward Password R…uests to Wall Directory Watch[0m.
[ 64.732402] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
[ 64.749679] systemd[1]: Reached target Slices.
[[0;32m OK [0m] Reached target [0;1;39mSlices[0m.
[ 64.804090] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[[0;32m OK [0m] Listening on [0;1;39mDevice-mapper event daemon FIFOs[0m.
[ 64.868427] systemd[1]: Listening on LVM2 poll daemon socket.
[[0;32m OK [0m] Listening on [0;1;39mLVM2 poll daemon socket[0m.
[ 64.998827] systemd[1]: Listening on Process Core Dump Socket.
[[0;32m OK [0m] Listening on [0;1;39mProcess Core Dump Socket[0m.
[ 65.061733] systemd[1]: Listening on initctl Compatibility Named Pipe.
[[0;32m OK [0m] Listening on [0;1;39minitctl Compatibility Named Pipe[0m.
[ 65.762318] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
[ 65.803879] systemd[1]: Listening on Journal Socket (/dev/log).
[[0;32m OK [0m] Listening on [0;1;39mJournal Socket (/dev/log)[0m.
[ 65.870028] systemd[1]: Listening on Journal Socket.
[[0;32m OK [0m] Listening on [0;1;39mJournal Socket[0m.
[ 65.966580] systemd[1]: Listening on udev Control Socket.
[[0;32m OK [0m] Listening on [0;1;39mudev Control Socket[0m.
[ 66.016638] systemd[1]: Listening on udev Kernel Socket.
[[0;32m OK [0m] Listening on [0;1;39mudev Kernel Socket[0m.
[ 66.072113] systemd[1]: Listening on User Database Manager Socket.
[[0;32m OK [0m] Listening on [0;1;39mUser Database Manager Socket[0m.
[ 66.265196] systemd[1]: Mounting Huge Pages File System...
Mounting [0;1;39mHuge Pages File System[0m...
[ 66.477098] systemd[1]: Mounting POSIX Message Queue File System...
Mounting [0;1;39mPOSIX Message Queue File System[0m...
[ 66.717215] systemd[1]: Mounting Kernel Debug File System...
Mounting [0;1;39mKernel Debug File System[0m...
[ 67.000634] systemd[1]: Mounting Kernel Trace File System...
Mounting [0;1;39mKernel Trace File System[0m...
[ 67.061135] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 67.078706] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped.
[ 67.246059] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
Starting [0;1;39mMonitoring of LVM…meventd or progress polling[0m...
[ 67.451615] systemd[1]: Starting Load Kernel Module configfs...
Starting [0;1;39mLoad Kernel Module configfs[0m...
[ 67.643795] systemd[1]: Starting Load Kernel Module drm...
Starting [0;1;39mLoad Kernel Module drm[0m...
[ 67.889066] systemd[1]: Starting Load Kernel Module fuse...
Starting [0;1;39mLoad Kernel Module fuse[0m...
[ 68.223484] systemd[1]: Starting Preprocess NFS configuration convertion...
Starting [0;1;39mPreprocess NFS configuration convertion[0m...
[ 68.405239] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 68.685006] systemd[1]: Starting Load Kernel Modules...
Starting [0;1;39mLoad Kernel Modules[0m...
[ 68.936926] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting [0;1;39mRemount Root and Kernel File Systems[0m...
[ 69.026562] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[ 69.217824] systemd[1]: Starting Coldplug All udev Devices...
Starting [0;1;39mColdplug All udev Devices[0m...
[ 69.476888] systemd[1]: Starting Setup Virtual Console...
Starting [0;1;39mSetup Virtual Console[0m...
[ 69.908789] systemd[1]: Mounted Huge Pages File System.
[[0;32m OK [0m] Mounted [0;1;39mHuge Pages File System[0m.
[ 69.985603] systemd[1]: Mounted POSIX Message Queue File System.
[[0;32m OK [0m] Mounted [0;1;39mPOSIX Message Queue File System[0m.
[ 70.097151] systemd[1]: Mounted Kernel Debug File System.
[[0;32m OK [0m] Mounted [0;1;39mKernel Debug File System[0m.
[ 70.243463] systemd[1]: Mounted Kernel Trace File System.
[[0;32m OK [0m] Mounted [0;1;39mKernel Trace File System[0m.
[ 70.407632] systemd[1]: modprobe@configfs.service: Succeeded.
[ 70.493564] systemd[1]: Finished Load Kernel Module configfs.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module configfs[0m.
[ 71.599759] systemd[1]: modprobe@drm.service: Succeeded.
[ 71.667485] systemd[1]: Finished Load Kernel Module drm.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module drm[0m.
[ 71.800153] systemd[1]: modprobe@fuse.service: Succeeded.
[ 71.890649] systemd[1]: Finished Load Kernel Module fuse.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module fuse[0m.
[ 72.030929] systemd[1]: nfs-convert.service: Succeeded.
[ 72.143720] systemd[1]: Finished Preprocess NFS configuration convertion.
[[0;32m OK [0m] Finished [0;1;39mPreprocess NFS configuration convertion[0m.
[ 72.226306] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
[ 72.288874] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
[ 72.405669] systemd[1]: Failed to start Load Kernel Modules.
[[0;1;31mFAILED[0m] Failed to start [0;1;39mLoad Kernel Modules[0m.
See 'systemctl status systemd-modules-load.service' for details.
[ 72.490312] systemd[1]: systemd-modules-load.service: Consumed 1.437s CPU time.
[ 72.572603] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 72.596232] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[ 72.813113] systemd[1]: Starting Apply Kernel Variables...
Starting [0;1;39mApply Kernel Variables[0m...
[ 73.694614] systemd[1]: systemd-remount-fs.service: Main process exited, code=exited, status=1/FAILURE
[ 73.736508] systemd[1]: systemd-remount-fs.service: Failed with result 'exit-code'.
[ 73.781556] systemd[1]: Failed to start Remount Root and Kernel File Systems.
[[0;1;31mFAILED[0m] Failed to start [0;1;39mRemount Root and Kernel File Systems[0m.
See 'systemctl status systemd-remount-fs.service' for details.
[ 73.866320] systemd[1]: systemd-remount-fs.service: Consumed 2.933s CPU time.
[ 73.899554] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[ 73.988234] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 74.177164] systemd[1]: Starting Load/Save Random Seed...
Starting [0;1;39mLoad/Save Random Seed[0m...
[ 74.298545] systemd[1]: Condition check resulted in Create System Users being skipped.
[ 74.658647] systemd[1]: Starting Create Static Device Nodes in /dev...
Starting [0;1;39mCreate Static Device Nodes in /dev[0m...
[ 75.179823] systemd[1]: Finished Apply Kernel Variables.
[[0;32m OK [0m] Finished [0;1;39mApply Kernel Variables[0m.
Attachment:
signature.asc
Description: PGP signature