Re: [PATCH net-next 13/15] net: dsa: mt7530: add support for 10G link modes for CPU port

[Arınç ÜNAL]

On 30.03.2023 18:23, Daniel Golle wrote:
> The built-in switch of the MT7988 SoC is internally connected using
> a stateless 10G link. Add support for 10G interface modes to silence
> a warning otherwise occurring when the switch driver is setup.
>
> Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
> Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx>
> ---
>   drivers/net/dsa/mt7530.c | 7 ++++++-
>   1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
> index 3a4682e71e746..ac666da2d10dc 100644
> --- a/drivers/net/dsa/mt7530.c
> +++ b/drivers/net/dsa/mt7530.c
> @@ -2618,6 +2618,9 @@ mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
>   	case PHY_INTERFACE_MODE_1000BASEX:
>   	case PHY_INTERFACE_MODE_2500BASEX:
>   		/* handled in SGMII PCS driver */
> +	case PHY_INTERFACE_MODE_USXGMII:
> +	case PHY_INTERFACE_MODE_10GKR:
> +		/* internal stateless 10G link */
>   		return 0;
>   	default:
>   		return -EINVAL;

I think it'd be better to make this explicitly for the switch in the
MT7988 SoC.

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index e5347dd2521b..f7542c7f60e4 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2666,10 +2665,13 @@ mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
 	case PHY_INTERFACE_MODE_1000BASEX:
 	case PHY_INTERFACE_MODE_2500BASEX:
 		/* handled in SGMII PCS driver */
+		return 0;
 	case PHY_INTERFACE_MODE_USXGMII:
 	case PHY_INTERFACE_MODE_10GKR:
-		/* internal stateless 10G link */
-		return 0;
+		if (priv->id == ID_MT7988)
+			/* internal stateless 10G link */
+			return 0;
+
 	default:
 		return -EINVAL;
 	}

Arınç