[PATCH] net: sfp: add qurik enabling 2500Base-x for HG MXPD-483II

[Daniel Golle]

The HG MXPD-483II 1310nm SFP module is meant to operate with 2500Base-X,
however, in their EEPROM they incorrectly specify:
    Transceiver type                          : Ethernet: 1000BASE-LX
    ...
    BR, Nominal                               : 2600MBd

Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway.

https://forum.banana-pi.org/t/bpi-r3-sfp-module-compatibility/14573/60

Reported-by: chowtom <chowtom@xxxxxxxxx>
Tested-by: chowtom <chowtom@xxxxxxxxx>
Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx>
---
 drivers/net/phy/sfp.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index f0fcb06fbe829..5e515165ceab7 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -406,6 +406,10 @@ static const struct sfp_quirk sfp_quirks[] = {
 
 	SFP_QUIRK_F("HALNy", "HL-GSFP", sfp_fixup_halny_gsfp),
 
+	// HG MXPD-483II-F 2.5G supports 2500Base-X, but incorrectly reports
+	// 2600MBd in their EERPOM
+	SFP_QUIRK_M("HG GENUINE", "MXPD-483II", sfp_quirk_2500basex),
+
 	// Huawei MA5671A can operate at 2500base-X, but report 1.2GBd NRZ in
 	// their EEPROM
 	SFP_QUIRK("HUAWEI", "MA5671A", sfp_quirk_2500basex,

base-commit: d74aab2ca19842d16815a97d4dd605deaae73c69
-- 
2.40.0