[PATCH] net/mlx5: stop waiting for PCI link if reset is required

[Niklas Schnelle]

after an error on the PCI link, the driver does not need to wait
for the link to become functional again as a reset is required. Stop
the wait loop in this case to accelerate the recovery flow.

Co-developed-by: Alexander Schmidt <alexs@xxxxxxxxxxxxx>
Signed-off-by: Alexander Schmidt <alexs@xxxxxxxxxxxxx>
Signed-off-by: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
---
 drivers/net/ethernet/mellanox/mlx5/core/health.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/health.c b/drivers/net/ethernet/mellanox/mlx5/core/health.c
index f9438d4e43ca..81ca44e0705a 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/health.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/health.c
@@ -325,6 +325,8 @@ int mlx5_health_wait_pci_up(struct mlx5_core_dev *dev)
 	while (sensor_pci_not_working(dev)) {
 		if (time_after(jiffies, end))
 			return -ETIMEDOUT;
+		if (pci_channel_offline(dev->pdev))
+			return -EIO;
 		msleep(100);
 	}
 	return 0;
@@ -332,10 +334,16 @@ int mlx5_health_wait_pci_up(struct mlx5_core_dev *dev)
 
 static int mlx5_health_try_recover(struct mlx5_core_dev *dev)
 {
+	int rc;
+
 	mlx5_core_warn(dev, "handling bad device here\n");
 	mlx5_handle_bad_state(dev);
-	if (mlx5_health_wait_pci_up(dev)) {
-		mlx5_core_err(dev, "health recovery flow aborted, PCI reads still not working\n");
+	rc = mlx5_health_wait_pci_up(dev);
+	if (rc) {
+		if (rc == -ETIMEDOUT)
+			mlx5_core_err(dev, "health recovery flow aborted, PCI reads still not working\n");
+		else
+			mlx5_core_err(dev, "health recovery flow aborted, PCI channel offline\n");
 		return -EIO;
 	}
 	mlx5_core_err(dev, "starting health recovery flow\n");

base-commit: 7e364e56293bb98cae1b55fd835f5991c4e96e7d
-- 
2.37.2