Re: [PATCH 2/2] phy: mtk-mipi-csi: add driver for CSI phy
From: Krzysztof Kozlowski
Date: Mon Apr 03 2023 - 05:53:13 EST
On 03/04/2023 09:19, Julien Stephan wrote:
> From: Phi-bang Nguyen <pnguyen@xxxxxxxxxxxx>
>
> This is a new driver that supports the MIPI CSI CD-PHY for mediatek
> mt8365 soc
>
> Signed-off-by: Louis Kuo <louis.kuo@xxxxxxxxxxxx>
> Signed-off-by: Phi-bang Nguyen <pnguyen@xxxxxxxxxxxx>
> [Julien Stephan: use regmap]
> [Julien Stephan: use GENMASK]
> Co-developed-by: Julien Stephan <jstephan@xxxxxxxxxxxx>
> Signed-off-by: Julien Stephan <jstephan@xxxxxxxxxxxx>
> ---
> .../bindings/phy/mediatek,csi-phy.yaml | 9 +-
> MAINTAINERS | 1 +
> drivers/phy/mediatek/Kconfig | 8 +
> drivers/phy/mediatek/Makefile | 2 +
> .../phy/mediatek/phy-mtk-mipi-csi-rx-reg.h | 435 ++++++++++++++++++
> drivers/phy/mediatek/phy-mtk-mipi-csi.c | 392 ++++++++++++++++
> 6 files changed, 845 insertions(+), 2 deletions(-)
> create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi-rx-reg.h
> create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi.c
>
> diff --git a/Documentation/devicetree/bindings/phy/mediatek,csi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,csi-phy.yaml
> index c026e43f35fd..ad4ba1d93a68 100644
> --- a/Documentation/devicetree/bindings/phy/mediatek,csi-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/mediatek,csi-phy.yaml
NAK, bindings are always separate patches. It also does not make any
sense - you just added it.
> @@ -33,9 +33,14 @@ additionalProperties: false
>
> examples:
> - |
> - phy@10011800 {
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + phy@11c10000 {
> compatible = "mediatek,mt8365-mipi-csi";
> - reg = <0 0x10011800 0 0x60>;
> + reg = <0 0x11c10000 0 0x4000>;
> #phy-cells = <1>;
> + };
> };
k_mipi_dphy_of_match[] = {
> + {.compatible = "mediatek,mt8365-mipi-csi"},
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, mtk_mipi_dphy_of_match);
> +
> +static struct platform_driver mipi_dphy_pdrv = {
> + .probe = mtk_mipi_dphy_probe,
> + .remove = mtk_mipi_dphy_remove,
> + .driver = {
> + .name = "mtk-mipi-csi",
> + .of_match_table = of_match_ptr(mtk_mipi_dphy_of_match),
Drop of_match_ptr(). You should see W=1 warnings when compile testing.
Best regards,
Krzysztof