Re: [PATCH net-next v2 1/3] net: ethernet: ti: am65-cpsw: Move mode specific config to mac_config()

From: Russell King (Oracle)
Date: Mon Apr 03 2023 - 07:08:59 EST


On Mon, Apr 03, 2023 at 04:31:04PM +0530, Siddharth Vadapalli wrote:
> Move the interface mode specific configuration to the mac_config()
> callback am65_cpsw_nuss_mac_config().
>
> Signed-off-by: Siddharth Vadapalli <s-vadapalli@xxxxxx>
> ---
> drivers/net/ethernet/ti/am65-cpsw-nuss.c | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
> index d17757ecbf42..74e099828978 100644
> --- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
> +++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
> @@ -1504,12 +1504,17 @@ static void am65_cpsw_nuss_mac_config(struct phylink_config *config, unsigned in
> phylink_config);
> struct am65_cpsw_port *port = container_of(slave, struct am65_cpsw_port, slave);
> struct am65_cpsw_common *common = port->common;
> + u32 mac_control = 0;
>
> if (common->pdata.extra_modes & BIT(state->interface)) {
> - if (state->interface == PHY_INTERFACE_MODE_SGMII)
> + if (state->interface == PHY_INTERFACE_MODE_SGMII) {
> + mac_control |= CPSW_SL_CTL_EXT_EN;
> writel(ADVERTISE_SGMII,
> port->sgmii_base + AM65_CPSW_SGMII_MR_ADV_ABILITY_REG);
> + }
>
> + if (mac_control)
> + cpsw_sl_ctl_set(port->slave.mac_sl, mac_control);
> writel(AM65_CPSW_SGMII_CONTROL_MR_AN_ENABLE,
> port->sgmii_base + AM65_CPSW_SGMII_CONTROL_REG);
> }
> @@ -1553,8 +1558,7 @@ static void am65_cpsw_nuss_mac_link_up(struct phylink_config *config, struct phy
>
> if (speed == SPEED_1000)
> mac_control |= CPSW_SL_CTL_GIG;
> - if (interface == PHY_INTERFACE_MODE_SGMII)
> - mac_control |= CPSW_SL_CTL_EXT_EN;
> + /* TODO: Verify whether in-band is necessary for 10 Mbps RGMII */
> if (speed == SPEED_10 && phy_interface_mode_is_rgmii(interface))
> /* Can be used with in band mode only */
> mac_control |= CPSW_SL_CTL_EXT_EN;

I'm afraid I can see you haven't thought this patch through properly.

am65_cpsw_nuss_mac_link_down() will call
cpsw_sl_ctl_reset(port->slave.mac_sl); which has the effect of clearing
to zero the entire MAC control register. This will clear
CPSW_SL_CTL_EXT_EN that was set in am65_cpsw_nuss_mac_config() which is
not what you want to be doing.

Given that we have the 10Mbps issue with RGMII, I think what you want
to be doing is:

1. Set CPSW_SL_CTL_EXT_EN in am65_cpsw_nuss_mac_config() if in SGMII
mode, otherwise clear this bit.

2. Clear the mac_control register in am65_cpsw_nuss_mac_link_down()
if in RMGII mode, otherwise preserve the state of
CPSW_SL_CTL_EXT_EN but clear all other bits.

3. Set CPSW_SL_CTL_EXT_EN in am65_cpsw_nuss_mac_link_up() if in
RGMII mode and 10Mbps.

--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!