Re: [PATCH net-next v2 1/3] net: ethernet: ti: am65-cpsw: Move mode specific config to mac_config()

From: Siddharth Vadapalli
Date: Mon Apr 03 2023 - 09:02:44 EST




On 03-04-2023 16:38, Russell King (Oracle) wrote:
> On Mon, Apr 03, 2023 at 04:31:04PM +0530, Siddharth Vadapalli wrote:
>> Move the interface mode specific configuration to the mac_config()
>> callback am65_cpsw_nuss_mac_config().
>>
>> Signed-off-by: Siddharth Vadapalli <s-vadapalli@xxxxxx>
>> ---
>> drivers/net/ethernet/ti/am65-cpsw-nuss.c | 10 +++++++---
>> 1 file changed, 7 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
>> index d17757ecbf42..74e099828978 100644
>> --- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
>> +++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
>> @@ -1504,12 +1504,17 @@ static void am65_cpsw_nuss_mac_config(struct phylink_config *config, unsigned in
>> phylink_config);
>> struct am65_cpsw_port *port = container_of(slave, struct am65_cpsw_port, slave);
>> struct am65_cpsw_common *common = port->common;
>> + u32 mac_control = 0;
>>
>> if (common->pdata.extra_modes & BIT(state->interface)) {
>> - if (state->interface == PHY_INTERFACE_MODE_SGMII)
>> + if (state->interface == PHY_INTERFACE_MODE_SGMII) {
>> + mac_control |= CPSW_SL_CTL_EXT_EN;
>> writel(ADVERTISE_SGMII,
>> port->sgmii_base + AM65_CPSW_SGMII_MR_ADV_ABILITY_REG);
>> + }
>>
>> + if (mac_control)
>> + cpsw_sl_ctl_set(port->slave.mac_sl, mac_control);
>> writel(AM65_CPSW_SGMII_CONTROL_MR_AN_ENABLE,
>> port->sgmii_base + AM65_CPSW_SGMII_CONTROL_REG);
>> }
>> @@ -1553,8 +1558,7 @@ static void am65_cpsw_nuss_mac_link_up(struct phylink_config *config, struct phy
>>
>> if (speed == SPEED_1000)
>> mac_control |= CPSW_SL_CTL_GIG;
>> - if (interface == PHY_INTERFACE_MODE_SGMII)
>> - mac_control |= CPSW_SL_CTL_EXT_EN;
>> + /* TODO: Verify whether in-band is necessary for 10 Mbps RGMII */
>> if (speed == SPEED_10 && phy_interface_mode_is_rgmii(interface))
>> /* Can be used with in band mode only */
>> mac_control |= CPSW_SL_CTL_EXT_EN;
>
> I'm afraid I can see you haven't thought this patch through properly.
>
> am65_cpsw_nuss_mac_link_down() will call
> cpsw_sl_ctl_reset(port->slave.mac_sl); which has the effect of clearing
> to zero the entire MAC control register. This will clear
> CPSW_SL_CTL_EXT_EN that was set in am65_cpsw_nuss_mac_config() which is
> not what you want to be doing.
>
> Given that we have the 10Mbps issue with RGMII, I think what you want
> to be doing is:
>
> 1. Set CPSW_SL_CTL_EXT_EN in am65_cpsw_nuss_mac_config() if in SGMII
> mode, otherwise clear this bit.
>
> 2. Clear the mac_control register in am65_cpsw_nuss_mac_link_down()
> if in RMGII mode, otherwise preserve the state of
> CPSW_SL_CTL_EXT_EN but clear all other bits.
>
> 3. Set CPSW_SL_CTL_EXT_EN in am65_cpsw_nuss_mac_link_up() if in
> RGMII mode and 10Mbps.

I plan to implement it as follows:
1. Add a member "u32 mode_config" to "struct am65_cpsw_slave_data" in
"am65-cpsw-nuss.h".
2. In am65_cpsw_nuss_mac_config(), store the value of mac_control in
"port->slave.mode_config".
3. In am65_cpsw_nuss_mac_link_down(), after the reset via
cpsw_sl_ctl_reset(), execute:
cpsw_sl_ctl_set(port->slave.mac_sl, port->slave.mode_config) in order to
restore the configuration performed in am65_cpsw_nuss_mac_config().

Please let me know in case of any suggestions to implement it in a
better manner.

Regards,
Siddharth.