[PATCH 0/9] RB1 + QCM2290 support
From: Konrad Dybcio
Date: Mon Apr 03 2023 - 13:36:38 EST
This series brings basic support for the Qualcomm Robotics RB1 board,
including but not limited to:
- TSENS-connected thermal management
- USB2
- eMMC (uSD depends requires regulators to work, will be sent separately)
- the necessary plumbing for *DSP + Wi-Fi (that also needs regulators)
- buttons
A compatible in the SCM C driver is not added on purpose, as:
1. it's not neccessary before we figure out disabling rpmcc, the dt
part is in regardless (the clock it consumes is always-on today)
2. a point to get rid of SoC-specific compatibles in there was raised
See also:
https://www.thundercomm.com/product/qualcomm-robotics-rb1-platform/
https://www.qualcomm.com/products/internet-of-things/industrial/industrial-automation/qualcomm-robotics-rb1-platform
Dependencies:
- https://lore.kernel.org/linux-arm-msm/20230314-topic-2290_compats-v1-0-47e26c3c0365@xxxxxxxxxx/
- https://lore.kernel.org/linux-arm-msm/20230315183231.3562580-1-konrad.dybcio@xxxxxxxxxx/
- https://lore.kernel.org/linux-arm-msm/20230323173019.3706069-1-dianders@xxxxxxxxxxxx/
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
Konrad Dybcio (9):
dt-bindings: firmware: document Qualcomm QCM2290 SCM
dt-bindings: arm: qcom: Add QRB2210/QCM2290 and RB1 board
arm64: dts: qcom: Add initial QCM2290, PM2250 & RB1 device trees
arm64: dts: qcom: qcm2290: Add most QUPs
arm64: dts: qcom: qcm2290: Add thermal zones
arm64: dts: qcom: qcm2290: Add SMP2P
arm64: dts: qcom: qcm2290: Add ADSP & modem
arm64: dts: qcom: qcm2290: Add WCN3990 Wi-Fi node
arm64: dts: qcom: qrb2210-rb1: Enable RESIN Volume Down
Documentation/devicetree/bindings/arm/qcom.yaml | 8 +
.../devicetree/bindings/firmware/qcom,scm.yaml | 3 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/pm2250.dtsi | 63 +
arch/arm64/boot/dts/qcom/qcm2290.dtsi | 1561 ++++++++++++++++++++
arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 112 ++
6 files changed, 1748 insertions(+)
---
base-commit: 31bd35b66249699343d2416658f57e97314a433a
change-id: 20230403-topic-rb1_qcm-78a8826b34b6
Best regards,
--
Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>