[PATCH 7/9] arm64: dts: qcom: qcm2290: Add ADSP & modem

[Konrad Dybcio]

Add required nodes to support the ADSP and modem found on the QCM2290.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/qcm2290.dtsi | 73 +++++++++++++++++++++++++++++++++++
 1 file changed, 73 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index 228a1d94501b..825623243787 100644
--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -1013,6 +1013,79 @@ usb_dwc3: usb@4e00000 {
 			};
 		};
 
+		remoteproc_mpss: remoteproc@6080000 {
+			compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas";
+			reg = <0x0 0x06080000 0x0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack",
+					  "shutdown-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd QCM2290_VDDCX>;
+
+			memory-region = <&pil_modem_mem>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
+				label = "mpss";
+				qcom,remote-pid = <1>;
+				mboxes = <&apcs_glb 12>;
+			};
+		};
+
+		remoteproc_adsp: remoteproc@ab00000 {
+			compatible = "qcom,qcm2290-adsp-pas", "qcom,sm6115-adsp-pas";
+			reg = <0x0 0x0ab00000 0x0 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog",
+					  "fatal",
+					  "ready",
+					  "handover",
+					  "stop-ack";
+
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+			clock-names = "xo";
+
+			power-domains = <&rpmpd QCM2290_VDD_LPI_CX>,
+					<&rpmpd QCM2290_VDD_LPI_MX>;
+
+			memory-region = <&pil_adsp_mem>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
+				label = "lpass";
+				qcom,remote-pid = <2>;
+				mboxes = <&apcs_glb 8>;
+			};
+		};
+
 		apps_smmu: iommu@c600000 {
 			compatible = "qcom,qcm2290-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0x0 0x0c600000 0x0 0x80000>;

-- 
2.40.0