Re: [PATCH] thermal/drivers/intel/int340x: Add DLVR support

From: Rafael J. Wysocki
Date: Mon Apr 03 2023 - 14:37:43 EST

Next message: Krzysztof Kozlowski: "Re: [PATCH RFC 19/20] dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated"
Previous message: Paul Cercueil: "Re: [PATCH v3 11/11] Documentation: iio: Document high-speed DMABUF based API"
Next in thread: srinivas pandruvada: "Re: [PATCH] thermal/drivers/intel/int340x: Add DLVR support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Fri, Mar 31, 2023 at 6:53 PM Srinivas Pandruvada
<srinivas.pandruvada@xxxxxxxxxxxxxxx> wrote:
>
> Add support for DLVR (Digital Linear Voltage Regulator) attributes,
> which can be used to control RFIM.
> Here instead of "fivr" another directory "dlvr" is created with DLVR
> attributes:
>
> /sys/bus/pci/devices/0000:00:04.0/dlvr
> ├── dlvr_freq_mhz
> ├── dlvr_freq_select
> ├── dlvr_hardware_rev
> ├── dlvr_pll_busy
> ├── dlvr_rfim_enable
> └── dlvr_spread_spectrum_pct
>
> Attributes
> dlvr_freq_mhz (RO):
> Current DLVR PLL frequency in MHz.
>
> dlvr_freq_select (RW):
> Sets DLVR PLL clock frequency.
>
> dlvr_hardware_rev (RO):
> DLVR hardware revision.
>
> dlvr_pll_busy (RO):
> PLL can't accept frequency change when set.
>
> dlvr_rfim_enable (RW):
> 0: Disable RF frequency hopping, 1: Enable RF frequency hopping.
>
> dlvr_spread_spectrum_pct (RW)
> A write to this register updates the DLVR spread spectrum percent value.

How is this attribute going to be used by user space in practice?
Also should it be split like the frequency one (for consistency)?

> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
> ---
> .../driver-api/thermal/intel_dptf.rst | 25 ++++++
> .../processor_thermal_device.c | 3 +-
> .../processor_thermal_device.h | 1 +
> .../processor_thermal_device_pci.c | 2 +-
> .../int340x_thermal/processor_thermal_rfim.c | 80 +++++++++++++++++--
> 5 files changed, 104 insertions(+), 7 deletions(-)
>
> diff --git a/Documentation/driver-api/thermal/intel_dptf.rst b/Documentation/driver-api/thermal/intel_dptf.rst
> index f5c193cccbda..da906deb6a7d 100644
> --- a/Documentation/driver-api/thermal/intel_dptf.rst
> +++ b/Documentation/driver-api/thermal/intel_dptf.rst
> @@ -264,6 +264,31 @@ DVFS attributes
> ``rfi_disable (RW)``
> Disable DDR rate change feature
>
> +DLVR attributes
> +
> +:file:`/sys/bus/pci/devices/0000\:00\:04.0/dlvr/`
> +
> +``dlvr_hardware_rev`` (RO)
> + DLVR hardware revision.
> +
> +``dlvr_freq_mhz`` (RO)
> + Current DLVR PLL frequency in MHz.
> +
> +``dlvr_freq_select`` (RW)
> + Sets DLVR PLL clock frequency. Once set, and enabled via
> + dlvr_rfim_enable, the dlvr_freq_mhz will show the current
> + DLVR PLL frequency.
> +
> +``dlvr_pll_busy`` (RO)
> + PLL can't accept frequency change when set.
> +
> +``dlvr_rfim_enable`` (RW)
> + 0: Disable RF frequency hopping, 1: Enable RF frequency hopping.
> +
> +``dlvr_spread_spectrum_pct`` (RW)
> + Sets DLVR spread spectrum percent value.
> +
> +
> DPTF Power supply and Battery Interface
> ----------------------------------------
>
> diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
> index a1dc18be7609..3ca0a2f5937f 100644
> --- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
> +++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
> @@ -337,7 +337,8 @@ int proc_thermal_mmio_add(struct pci_dev *pdev,
> }
>
> if (feature_mask & PROC_THERMAL_FEATURE_FIVR ||
> - feature_mask & PROC_THERMAL_FEATURE_DVFS) {
> + feature_mask & PROC_THERMAL_FEATURE_DVFS ||
> + feature_mask & PROC_THERMAL_FEATURE_DLVR) {
> ret = proc_thermal_rfim_add(pdev, proc_priv);
> if (ret) {
> dev_err(&pdev->dev, "failed to add RFIM interface\n");
> diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
> index 7d52fcff4937..7acaa8f1b896 100644
> --- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
> +++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
> @@ -60,6 +60,7 @@ struct rapl_mmio_regs {
> #define PROC_THERMAL_FEATURE_FIVR 0x02
> #define PROC_THERMAL_FEATURE_DVFS 0x04
> #define PROC_THERMAL_FEATURE_MBOX 0x08
> +#define PROC_THERMAL_FEATURE_DLVR 0x10
>
> #if IS_ENABLED(CONFIG_PROC_THERMAL_MMIO_RAPL)
> int proc_thermal_rapl_add(struct pci_dev *pdev, struct proc_thermal_device *proc_priv);
> diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c
> index 90526f46c9b1..aaff67377250 100644
> --- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c
> +++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c
> @@ -352,7 +352,7 @@ static SIMPLE_DEV_PM_OPS(proc_thermal_pci_pm, proc_thermal_pci_suspend,
>
> static const struct pci_device_id proc_thermal_pci_ids[] = {
> { PCI_DEVICE_DATA(INTEL, ADL_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_MBOX) },
> - { PCI_DEVICE_DATA(INTEL, MTLP_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_MBOX) },
> + { PCI_DEVICE_DATA(INTEL, MTLP_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_MBOX | PROC_THERMAL_FEATURE_DLVR) },
> { PCI_DEVICE_DATA(INTEL, RPL_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_MBOX) },
> { },
> };
> diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c
> index 92ed1213fe37..951a0869982a 100644
> --- a/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c
> +++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_rfim.c
> @@ -39,6 +39,25 @@ static const struct mmio_reg tgl_fivr_mmio_regs[] = {
> { 1, 0x5A14, 2, 0x3, 1}, /* fivr_fffc_rev */
> };
>
> +static const char * const dlvr_strings[] = {
> + "dlvr_spread_spectrum_pct",
> + "dlvr_rfim_enable",
> + "dlvr_freq_select",
> + "dlvr_hardware_rev",
> + "dlvr_freq_mhz",
> + "dlvr_pll_busy",
> + NULL
> +};
> +
> +static const struct mmio_reg dlvr_mmio_regs[] = {
> + { 0, 0x15A08, 5, 0x1F, 0}, /* dlvr_spread_spectrum_pct */
> + { 0, 0x15A08, 1, 0x1, 7}, /* dlvr_rfim_enable */
> + { 0, 0x15A08, 12, 0xFFF, 8}, /* dlvr_freq_select */
> + { 1, 0x15A10, 2, 0x3, 30}, /* dlvr_hardware_rev */
> + { 1, 0x15A10, 16, 0xFFFF, 0}, /* dlvr_freq_mhz */
> + { 1, 0x15A10, 1, 0x1, 16}, /* dlvr_pll_busy */
> +};
> +
> /* These will represent sysfs attribute names */
> static const char * const dvfs_strings[] = {
> "rfi_restriction_run_busy",
> @@ -78,14 +97,16 @@ static ssize_t suffix##_show(struct device *dev,\
> int ret;\
> \
> proc_priv = pci_get_drvdata(pdev);\
> - if (table) {\
> + if (table == 1) {\
> match_strs = (const char **)dvfs_strings;\
> mmio_regs = adl_dvfs_mmio_regs;\
> - } else { \
> + } else if (table == 2) { \
> + match_strs = (const char **)dlvr_strings;\
> + mmio_regs = dlvr_mmio_regs;\
> + } else {\
> match_strs = (const char **)fivr_strings;\
> mmio_regs = tgl_fivr_mmio_regs;\
> } \
> - \
> ret = match_string(match_strs, -1, attr->attr.name);\
> if (ret < 0)\
> return ret;\
> @@ -109,10 +130,13 @@ static ssize_t suffix##_store(struct device *dev,\
> u32 mask;\
> \
> proc_priv = pci_get_drvdata(pdev);\
> - if (table) {\
> + if (table == 1) {\
> match_strs = (const char **)dvfs_strings;\
> mmio_regs = adl_dvfs_mmio_regs;\
> - } else { \
> + } else if (table == 2) { \
> + match_strs = (const char **)dlvr_strings;\
> + mmio_regs = dlvr_mmio_regs;\
> + } else {\
> match_strs = (const char **)fivr_strings;\
> mmio_regs = tgl_fivr_mmio_regs;\
> } \
> @@ -147,6 +171,39 @@ RFIM_STORE(spread_spectrum_clk_enable, 0)
> RFIM_STORE(rfi_vco_ref_code, 0)
> RFIM_STORE(fivr_fffc_rev, 0)
>
> +RFIM_SHOW(dlvr_spread_spectrum_pct, 2)
> +RFIM_SHOW(dlvr_hardware_rev, 2)
> +RFIM_SHOW(dlvr_freq_mhz, 2)
> +RFIM_SHOW(dlvr_pll_busy, 2)
> +RFIM_SHOW(dlvr_freq_select, 2)
> +RFIM_SHOW(dlvr_rfim_enable, 2)
> +
> +RFIM_STORE(dlvr_spread_spectrum_pct, 2)
> +RFIM_STORE(dlvr_rfim_enable, 2)
> +RFIM_STORE(dlvr_freq_select, 2)
> +
> +static DEVICE_ATTR_RW(dlvr_spread_spectrum_pct);
> +static DEVICE_ATTR_RW(dlvr_freq_select);
> +static DEVICE_ATTR_RO(dlvr_hardware_rev);
> +static DEVICE_ATTR_RO(dlvr_freq_mhz);
> +static DEVICE_ATTR_RO(dlvr_pll_busy);
> +static DEVICE_ATTR_RW(dlvr_rfim_enable);
> +
> +static struct attribute *dlvr_attrs[] = {
> + &dev_attr_dlvr_spread_spectrum_pct.attr,
> + &dev_attr_dlvr_freq_select.attr,
> + &dev_attr_dlvr_hardware_rev.attr,
> + &dev_attr_dlvr_freq_mhz.attr,
> + &dev_attr_dlvr_pll_busy.attr,
> + &dev_attr_dlvr_rfim_enable.attr,
> + NULL
> +};
> +
> +static const struct attribute_group dlvr_attribute_group = {
> + .attrs = dlvr_attrs,
> + .name = "dlvr"
> +};
> +
> static DEVICE_ATTR_RW(vco_ref_code_lo);
> static DEVICE_ATTR_RW(vco_ref_code_hi);
> static DEVICE_ATTR_RW(spread_spectrum_pct);
> @@ -277,12 +334,22 @@ int proc_thermal_rfim_add(struct pci_dev *pdev, struct proc_thermal_device *proc
> return ret;
> }
>
> + if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_DLVR) {
> + ret = sysfs_create_group(&pdev->dev.kobj, &dlvr_attribute_group);
> + if (ret)
> + return ret;
> + }
> +
> if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_DVFS) {
> ret = sysfs_create_group(&pdev->dev.kobj, &dvfs_attribute_group);
> if (ret && proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_FIVR) {
> sysfs_remove_group(&pdev->dev.kobj, &fivr_attribute_group);
> return ret;
> }
> + if (ret && proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_DLVR) {
> + sysfs_remove_group(&pdev->dev.kobj, &dlvr_attribute_group);
> + return ret;
> + }
> }
>
> return 0;
> @@ -296,6 +363,9 @@ void proc_thermal_rfim_remove(struct pci_dev *pdev)
> if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_FIVR)
> sysfs_remove_group(&pdev->dev.kobj, &fivr_attribute_group);
>
> + if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_DLVR)
> + sysfs_remove_group(&pdev->dev.kobj, &dlvr_attribute_group);
> +
> if (proc_priv->mmio_feature_mask & PROC_THERMAL_FEATURE_DVFS)
> sysfs_remove_group(&pdev->dev.kobj, &dvfs_attribute_group);
> }
> --
> 2.34.1
>

Next message: Krzysztof Kozlowski: "Re: [PATCH RFC 19/20] dt-bindings: interrupt-controller: arm,versatile-fpga-irq: mark oxnas compatible as deprecated"
Previous message: Paul Cercueil: "Re: [PATCH v3 11/11] Documentation: iio: Document high-speed DMABUF based API"
Next in thread: srinivas pandruvada: "Re: [PATCH] thermal/drivers/intel/int340x: Add DLVR support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]