Re: [PATCH 1/2] dt-bindings: hwmon: pwm-fan: Convert to DT schema

From: Rob Herring
Date: Tue Apr 04 2023 - 09:55:38 EST


On Mon, Apr 03, 2023 at 07:22:45PM +0300, Cristian Ciocaltea wrote:
> On 4/3/23 17:43, AngeloGioacchino Del Regno wrote:
> > Il 03/04/23 16:32, Cristian Ciocaltea ha scritto:
> >> On 4/3/23 16:10, Rob Herring wrote:
> >>>
> >>> On Mon, 03 Apr 2023 13:50:51 +0300, Cristian Ciocaltea wrote:
> >>>> Convert the PWM fan bindings to DT schema format.
> >>>>
> >>>> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
> >>>> ---
> >>>>    .../devicetree/bindings/hwmon/pwm-fan.txt     |  68 +----------
> >>>>    .../devicetree/bindings/hwmon/pwm-fan.yaml    | 109
> >>>> ++++++++++++++++++
> >>>>    2 files changed, 110 insertions(+), 67 deletions(-)
> >>>>    create mode 100644
> >>>> Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
> >>>>
> >>>
> >>> Running 'make dtbs_check' with the schema in this patch gives the
> >>> following warnings. Consider if they are expected or the schema is
> >>> incorrect. These may not be new warnings.
> >>>
> >>> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> >>> This will change in the future.
> >>>
> >>> Full log is available here:
> >>> https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230403105052.426135-2-cristian.ciocaltea@xxxxxxxxxxxxx
> >>>
> >>>
> >>> pwm-fan: 'cooling-max-state', 'cooling-min-state' do not match any of
> >>> the regexes: 'pinctrl-[0-9]+'
> >>>     arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dtb
> >>>     arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dtb
> >>>
> >>
> >> The only references to the offending cooling-{min|max}-state are located
> >> in a few DTS files. Assuming they are obsolete, may I simply drop them?
> >>
> >
> > If they're obsolete, you can mark them as `deprecated: true` in the
> > binding, but
> > dropping them entirely would be an ABI breakage, so no, you can't.
>
> >From the pwm-fan driver point of view, the properties are not supported
> and I couldn't find any indication that they could have been used in the
> past.
>
> Hence I'm not sure adding them to the binding is the proper way to
> handle this issue.

They can be omitted.

Rob