[PATCH 05/12] net: phy: add phy_id_broken support

[Marco Felsch]

Some phy's don't report the correct phy-id, e.g. the TJA1102 dual-port
report 0 for the 2nd port. To fix this a driver needs to supply the
phyid instead and tell the phy framework to not try to readout the
phyid. The latter case is done via the new 'phy_id_broken' flag which
tells the phy framework to skip phyid readout for the corresponding phy.

Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
---
 drivers/net/phy/nxp-tja11xx.c | 1 +
 drivers/net/phy/phy_device.c  | 3 +++
 include/linux/phy.h           | 3 +++
 3 files changed, 7 insertions(+)

diff --git a/drivers/net/phy/nxp-tja11xx.c b/drivers/net/phy/nxp-tja11xx.c
index b5e03d66b7f5..2a4c0f6d74eb 100644
--- a/drivers/net/phy/nxp-tja11xx.c
+++ b/drivers/net/phy/nxp-tja11xx.c
@@ -560,6 +560,7 @@ static void tja1102_p1_register(struct work_struct *work)
 			.mii_bus = bus,
 			/* Real PHY ID of Port 1 is 0 */
 			.phy_id = PHY_ID_TJA1102,
+			.phy_id_broken = true,
 		};
 		struct phy_device *phy;
 
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index bb465a324eef..7e4b3b3caba9 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -969,6 +969,9 @@ static int phy_device_detect(struct phy_device_config *config)
 	int addr = config->phy_addr;
 	int r;
 
+	if (config->phy_id_broken)
+		return 0;
+
 	if (is_c45)
 		r = get_phy_c45_ids(bus, addr, c45_ids);
 	else
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 498f4dc7669d..0f0cb72a08ab 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -764,6 +764,8 @@ static inline struct phy_device *to_phy_device(const struct device *dev)
  * @phy_id: UID for this device found during discovery
  * @c45_ids: 802.3-c45 Device Identifiers if is_c45.
  * @is_c45: If true the PHY uses the 802.3 clause 45 protocol
+ * @phy_id_broken: Skip the phy_id detection instead use the supplied phy_id or
+ *                 c45_ids.
  *
  * The struct contain possible configuration parameters for a PHY device which
  * are used to setup the struct phy_device.
@@ -775,6 +777,7 @@ struct phy_device_config {
 	u32 phy_id;
 	struct phy_c45_device_ids c45_ids;
 	bool is_c45;
+	bool phy_id_broken;
 };
 
 /**

-- 
2.39.2