[PATCH v8 4/7] PCI: Initialize `link_active_reporting' earlier

[Maciej W. Rozycki]

Determine whether Data Link Layer Link Active Reporting is available 
ahead of calling any fixups so that the cached value can be used there 
and later on.

Signed-off-by: Maciej W. Rozycki <macro@xxxxxxxxxxx>
---
Changes from v7:

- Reorder from 3/7.

Changes from v6:

- Regenerate against 6.3-rc5.

New change in v6.
---
 drivers/pci/probe.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

linux-pcie-link-active-reporting-early.diff
Index: linux-macro/drivers/pci/probe.c
===================================================================
--- linux-macro.orig/drivers/pci/probe.c
+++ linux-macro/drivers/pci/probe.c
@@ -820,7 +820,6 @@ static void pci_set_bus_speed(struct pci
 
 		pcie_capability_read_dword(bridge, PCI_EXP_LNKCAP, &linkcap);
 		bus->max_bus_speed = pcie_link_speed[linkcap & PCI_EXP_LNKCAP_SLS];
-		bridge->link_active_reporting = !!(linkcap & PCI_EXP_LNKCAP_DLLLARC);
 
 		pcie_capability_read_word(bridge, PCI_EXP_LNKSTA, &linksta);
 		pcie_update_link_speed(bus, linksta);
@@ -1829,6 +1828,7 @@ int pci_setup_device(struct pci_dev *dev
 	int pos = 0;
 	struct pci_bus_region region;
 	struct resource *res;
+	u32 linkcap;
 
 	hdr_type = pci_hdr_type(dev);
 
@@ -1876,6 +1876,10 @@ int pci_setup_device(struct pci_dev *dev
 	/* "Unknown power state" */
 	dev->current_state = PCI_UNKNOWN;
 
+	/* Set it early to make it available to fixups, etc.  */
+	pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, &linkcap);
+	dev->link_active_reporting = !!(linkcap & PCI_EXP_LNKCAP_DLLLARC);
+
 	/* Early fixups, before probing the BARs */
 	pci_fixup_device(pci_fixup_early, dev);