[PATCH V3 0/5] Add regulator support for IPQ9574 SoC

[Devi Priya]

IPQ9574 SoC uses the PMIC MP5496 and SMPA1 regulator for APSS voltage scaling.
This patch series adds support for the same and also enables the RPM 
communication over the RPMSG framework.

DTS patch depends on the below series
https://lore.kernel.org/linux-arm-msm/20230406061314.10916-1-quic_devipriy@xxxxxxxxxxx/

[V3]:
	- Dropped PATCH [1/6] dt-bindings: soc: qcom: smd-rpm: Add IPQ9574 compatible
	  as it is available in linux-next/master
	- Dropped PATCH [4/6] regulator: qcom_smd: Add support to define the bootup voltage
	  and updated the nominal voltage in the Board DT as discussed
	- Splitted the board DT changes to a separate patch as suggested
	- Detailed change logs are added to the respective patches
[V2]:
	https://lore.kernel.org/linux-arm-msm/20230217142030.16012-1-quic_devipriy@xxxxxxxxxxx/
	- Reordered the patches to have the bindings and driver changes
	  in place before the device tree support
	- Dropped the 'soc: qcom: smd-rpm: Add IPQ9574 compatible' since
	  it is already part of the linux-next/master
	- Detailed change log is added to the respective patches
[V1]:
	https://lore.kernel.org/linux-arm-msm/20230113150310.29709-1-quic_devipriy@xxxxxxxxxxx/

Devi Priya (5):
  regulator: qcom_smd: Add s1 sub-node to mp5496 regulator
  regulator: qcom_smd: Add MP5496 S1 regulator
  arm64: dts: qcom: ipq9574: Add RPM related nodes
  arm64: dts: qcom: ipq9574: Add SMPA1 regulator node
  arm64: dts: qcom: ipq9574: Add cpufreq support

 .../regulator/qcom,smd-rpm-regulator.yaml     |  2 +-
 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts   | 19 +++++
 arch/arm64/boot/dts/qcom/ipq9574.dtsi         | 75 +++++++++++++++++++
 drivers/regulator/qcom_smd-regulator.c        | 10 +++
 4 files changed, 105 insertions(+), 1 deletion(-)


base-commit: 8417c8f5007bf4567ccffda850a3157c7d905f67
-- 
2.17.1