Re: [PATCH v2 7/7] soundwire: qcom: use tabs for indentation in defines

[Konrad Dybcio]

On 3.04.2023 15:25, Krzysztof Kozlowski wrote:
> Use consistently only tabs to indent the value in defines.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>  drivers/soundwire/qcom.c | 34 +++++++++++++++++-----------------
>  1 file changed, 17 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
> index f2e1135ef113..77a5e4cbbe9b 100644
> --- a/drivers/soundwire/qcom.c
> +++ b/drivers/soundwire/qcom.c
> @@ -58,9 +58,9 @@
>  #define SWRM_INTERRUPT_STATUS_SPECIAL_CMD_ID_FINISHED		BIT(10)
>  #define SWRM_INTERRUPT_STATUS_AUTO_ENUM_FAILED			BIT(11)
>  #define SWRM_INTERRUPT_STATUS_AUTO_ENUM_TABLE_IS_FULL		BIT(12)
> -#define SWRM_INTERRUPT_STATUS_BUS_RESET_FINISHED_V2             BIT(13)
> -#define SWRM_INTERRUPT_STATUS_CLK_STOP_FINISHED_V2              BIT(14)
> -#define SWRM_INTERRUPT_STATUS_EXT_CLK_STOP_WAKEUP               BIT(16)
> +#define SWRM_INTERRUPT_STATUS_BUS_RESET_FINISHED_V2		BIT(13)
> +#define SWRM_INTERRUPT_STATUS_CLK_STOP_FINISHED_V2		BIT(14)
> +#define SWRM_INTERRUPT_STATUS_EXT_CLK_STOP_WAKEUP		BIT(16)
>  #define SWRM_INTERRUPT_MAX					17
>  #define SWRM_V1_3_INTERRUPT_MASK_ADDR				0x204
>  #define SWRM_V1_3_INTERRUPT_CLEAR				0x208
> @@ -125,20 +125,20 @@
>  #define SWRM_REG_VAL_PACK(data, dev, id, reg)	\
>  			((reg) | ((id) << 16) | ((dev) << 20) | ((data) << 24))
>  
> -#define MAX_FREQ_NUM		1
> -#define TIMEOUT_MS		100
> -#define QCOM_SWRM_MAX_RD_LEN	0x1
> -#define QCOM_SDW_MAX_PORTS	14
> -#define DEFAULT_CLK_FREQ	9600000
> -#define SWRM_MAX_DAIS		0xF
> -#define SWR_INVALID_PARAM 0xFF
> -#define SWR_HSTOP_MAX_VAL 0xF
> -#define SWR_HSTART_MIN_VAL 0x0
> -#define SWR_BROADCAST_CMD_ID    0x0F
> -#define SWR_MAX_CMD_ID	14
> -#define MAX_FIFO_RD_RETRY 3
> -#define SWR_OVERFLOW_RETRY_COUNT 30
> -#define SWRM_LINK_STATUS_RETRY_CNT 100
> +#define MAX_FREQ_NUM						1
> +#define TIMEOUT_MS						100
> +#define QCOM_SWRM_MAX_RD_LEN					0x1
> +#define QCOM_SDW_MAX_PORTS					14
> +#define DEFAULT_CLK_FREQ					9600000
> +#define SWRM_MAX_DAIS						0xF
> +#define SWR_INVALID_PARAM					0xFF
> +#define SWR_HSTOP_MAX_VAL					0xF
> +#define SWR_HSTART_MIN_VAL					0x0
> +#define SWR_BROADCAST_CMD_ID					0x0F
> +#define SWR_MAX_CMD_ID						14
> +#define MAX_FIFO_RD_RETRY					3
> +#define SWR_OVERFLOW_RETRY_COUNT				30
> +#define SWRM_LINK_STATUS_RETRY_CNT				100
>  
>  enum {
>  	MASTER_ID_WSA = 1,