Re: [net-next PATCH v6 12/16] dt-bindings: net: dsa: qca8k: add LEDs definition example

[Rob Herring]

On Mon, Mar 27, 2023 at 04:10:27PM +0200, Christian Marangi wrote:
> Add LEDs definition example for qca8k Switch Family to describe how they
> should be defined for a correct usage.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> ---
>  .../devicetree/bindings/net/dsa/qca8k.yaml    | 24 +++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> index 389892592aac..ad354864187a 100644
> --- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> @@ -18,6 +18,8 @@ description:
>    PHY it is connected to. In this config, an internal mdio-bus is registered and
>    the MDIO master is used for communication. Mixed external and internal
>    mdio-bus configurations are not supported by the hardware.
> +  Each phy has at most 3 LEDs connected and can be declared
> +  using the standard LEDs structure.
>  
>  properties:
>    compatible:
> @@ -117,6 +119,7 @@ unevaluatedProperties: false
>  examples:
>    - |
>      #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/leds/common.h>
>  
>      mdio {
>          #address-cells = <1>;
> @@ -226,6 +229,27 @@ examples:
>                      label = "lan1";
>                      phy-mode = "internal";
>                      phy-handle = <&internal_phy_port1>;
> +
> +                    leds {
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +
> +                        led@0 {
> +                            reg = <0>;
> +                            color = <LED_COLOR_ID_WHITE>;
> +                            function = LED_FUNCTION_LAN;
> +                            function-enumerator = <1>;
> +                            default-state = "keep";
> +                        };
> +
> +                        led@1 {
> +                            reg = <1>;
> +                            color = <LED_COLOR_ID_AMBER>;
> +                            function = LED_FUNCTION_LAN;
> +                            function-enumerator = <1>;

Isn't function-enumerator supposed to be unique within a given 
'function'?

> +                            default-state = "keep";
> +                        };
> +                    };
>                  };
>  
>                  port@2 {
> -- 
> 2.39.2
>