[PATCH 0/2] Hwmon driver for MAX31827 temperature switch

[Daniel Matyas]

The driver was tested on Raspberry Pi 4 Model B.

The implemented functionalities of it are: reading a 1shot input value
and changing and reading the overtemperature and undertemperature alarm
and hysteresis values. The read values are raw: signed 16 bit int
format. To obtain the real value one must multiply the value with 0.0625.

Daniel Matyas (2):
  dt-bindings: hwmon: add MAX31827
  hwmon: max31827: add MAX31827 driver

 .../bindings/hwmon/adi,max31827.yaml          |  48 ++++
 .../devicetree/bindings/trivial-devices.yaml  |   2 +
 MAINTAINERS                                   |   8 +
 drivers/hwmon/Kconfig                         |  11 +
 drivers/hwmon/Makefile                        |   1 +
 drivers/hwmon/max31827.c                      | 240 ++++++++++++++++++
 6 files changed, 310 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/adi,max31827.yaml
 create mode 100644 drivers/hwmon/max31827.c

-- 
2.34.1