[PATCH 2/2] hwmon: max31827: add MAX31827 driver
From: Daniel Matyas
Date: Thu Apr 06 2023 - 12:46:00 EST
MAX31827 is a low-power temperature switch with I2C interface.
The device is a ±1°C accuracy from -40°C to +125°C
(12 bits) local temperature switch and sensor with I2C/SM-
Bus interface. The combination of small 6-bump wafer-lev-
el package (WLP) and high accuracy makes this temper-
ature sensor/switch ideal for a wide range of applications.
Signed-off-by: Daniel Matyas <daniel.matyas@xxxxxxxxxx>
---
MAINTAINERS | 1 +
drivers/hwmon/Kconfig | 11 ++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/max31827.c | 240 +++++++++++++++++++++++++++++++++++++++
4 files changed, 253 insertions(+)
create mode 100644 drivers/hwmon/max31827.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 549cea6bc340..63c17195a99b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12541,6 +12541,7 @@ L: linux-hwmon@xxxxxxxxxxxxxxx
S: Supported
W: http://ez.analog.com/community/linux-device-drivers
F: Documentation/devicetree/bindings/hwmon/adi,max31827.yaml
+F: drivers/hwmon/max31827.c
MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
L: linux-hwmon@xxxxxxxxxxxxxxx
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 5b3b76477b0e..80c44a787d42 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -2401,4 +2401,15 @@ config SENSORS_ASUS_EC
endif # ACPI
+config MAX31827
+ tristate "MAX31827 low-power temperature switch"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ If you say yes here you get support for MAX31827
+ low-power temperature switch and sensor connected with I2C.
+
+ This driver can also be built as a module. If so, the module
+ will be called max31827.
+
endif # HWMON
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 88712b5031c8..d00f0a1e73f6 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -224,3 +224,4 @@ obj-$(CONFIG_PMBUS) += pmbus/
ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG
+obj-$(CONFIG_MAX31827) += max31827.o
diff --git a/drivers/hwmon/max31827.c b/drivers/hwmon/max31827.c
new file mode 100644
index 000000000000..1c79bcf12d78
--- /dev/null
+++ b/drivers/hwmon/max31827.c
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * max31827.c - Support for Maxim Low-Power Switch
+ *
+ * Copyright (c) 2023 Daniel Matyas <daniel.matyas@xxxxxxxxxx>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+#define MAX31827_T_REG 0x0
+#define MAX31827_CONFIGURATION_REG 0x2
+#define MAX31827_TH_REG 0x4
+#define MAX31827_TL_REG 0x6
+#define MAX31827_TH_HYST_REG 0x8
+#define MAX31827_TL_HYST_REG 0xA
+
+#define MAX31827_CONFIGURATION_1SHOT_MASK BIT(0)
+#define MAX31827_CONFIGURATION_CNV_RATE_MASK GENMASK(3, 1)
+#define MAX31827_CONFIGURATION_RESOL_MASK GENMASK(7, 6)
+#define MAX31827_CONFIGURATION_U_TEMP_STAT_MASK BIT(14)
+#define MAX31827_CONFIGURATION_O_TEMP_STAT_MASK BIT(15)
+
+#define MAX31827_CNV_SHUTDOWN 0x0
+#define MAX31827_CNV_1_DIV_64_HZ 0x1
+#define MAX31827_CNV_1_DIV_32_HZ 0x2
+#define MAX31827_CNV_1_DIV_16_HZ 0x3
+#define MAX31827_CNV_1_DIV_4_HZ 0x4
+#define MAX31827_CNV_1_HZ 0x5
+#define MAX31827_CNV_4_HZ 0x6
+#define MAX31827_CNV_8_HZ 0x7
+
+#define MAX31827_1SHOT_EN(x) ((x) ? BIT(0) : 0)
+
+struct max31827_state {
+ struct regmap *regmap;
+ struct i2c_client *client;
+};
+
+static const struct regmap_config max31827_regmap = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .max_register = 0xA,
+};
+
+static umode_t max31827_is_visible(const void *state,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ if (type == hwmon_temp) {
+ switch (attr) {
+ case hwmon_temp_enable:
+ case hwmon_temp_max:
+ case hwmon_temp_min:
+ case hwmon_temp_max_hyst:
+ case hwmon_temp_min_hyst:
+ return 0644;
+ case hwmon_temp_input:
+ return 0444;
+ }
+ }
+
+ return 0;
+}
+
+static int max31827_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct max31827_state *st;
+ unsigned int uval;
+ int ret;
+
+ st = dev_get_drvdata(dev);
+ if (IS_ERR(st))
+ return PTR_ERR(st);
+
+ if (type != hwmon_temp)
+ return -EOPNOTSUPP;
+
+ switch (attr) {
+ case hwmon_temp_enable:
+ ret = regmap_read(st->regmap, MAX31827_CONFIGURATION_REG, &uval);
+ uval = FIELD_GET(MAX31827_CONFIGURATION_1SHOT_MASK, uval);
+ break;
+
+ case hwmon_temp_input:
+ ret = regmap_read(st->regmap, MAX31827_T_REG, &uval);
+ break;
+
+ case hwmon_temp_max:
+ ret = regmap_read(st->regmap, MAX31827_TH_REG, &uval);
+ break;
+
+ case hwmon_temp_max_hyst:
+ ret = regmap_read(st->regmap, MAX31827_TH_HYST_REG, &uval);
+ break;
+ case hwmon_temp_min:
+ ret = regmap_read(st->regmap, MAX31827_TL_REG, &uval);
+ break;
+
+ case hwmon_temp_min_hyst:
+ ret = regmap_read(st->regmap, MAX31827_TL_HYST_REG, &uval);
+ break;
+
+ default:
+ ret = -EOPNOTSUPP;
+ }
+
+ if (ret)
+ return ret;
+
+ *val = uval;
+
+ return 0;
+}
+
+static int max31827_write(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long val)
+{
+ struct max31827_state *st = dev_get_drvdata(dev);
+
+ if (IS_ERR(st))
+ return PTR_ERR(st);
+
+ switch (attr) {
+ case hwmon_temp_enable:
+ if (val >> 1)
+ return -EOPNOTSUPP;
+
+ return regmap_update_bits(st->regmap, MAX31827_CONFIGURATION_REG,
+ MAX31827_CONFIGURATION_1SHOT_MASK,
+ MAX31827_1SHOT_EN(val));
+
+ case hwmon_temp_max:
+ return regmap_write(st->regmap, MAX31827_TH_REG, val);
+
+ case hwmon_temp_max_hyst:
+ return regmap_write(st->regmap, MAX31827_TH_HYST_REG, val);
+
+ case hwmon_temp_min:
+ return regmap_write(st->regmap, MAX31827_TL_REG, val);
+
+ case hwmon_temp_min_hyst:
+ return regmap_write(st->regmap, MAX31827_TL_HYST_REG, val);
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int max31827_init_client(struct max31827_state *st)
+{
+ return regmap_update_bits(st->regmap, MAX31827_CONFIGURATION_REG,
+ MAX31827_CONFIGURATION_CNV_RATE_MASK |
+ MAX31827_CONFIGURATION_1SHOT_MASK,
+ MAX31827_1SHOT_EN(1));
+}
+
+static const struct hwmon_channel_info *max31827_info[] = {
+ HWMON_CHANNEL_INFO(temp, HWMON_T_ENABLE | HWMON_T_INPUT | HWMON_T_MIN |
+ HWMON_T_MIN_HYST | HWMON_T_MAX | HWMON_T_MAX_HYST),
+ NULL,
+};
+
+static const struct hwmon_ops max31827_hwmon_ops = {
+ .is_visible = max31827_is_visible,
+ .read = max31827_read,
+ .write = max31827_write,
+};
+
+static const struct hwmon_chip_info max31827_chip_info = {
+ .ops = &max31827_hwmon_ops,
+ .info = max31827_info,
+};
+
+static int max31827_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct device *hwmon_dev;
+ struct max31827_state *st;
+ int ret;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
+ return -EOPNOTSUPP;
+
+ st = devm_kzalloc(dev, sizeof(struct max31827_state), GFP_KERNEL);
+ if (!st)
+ return -ENOMEM;
+
+ st->client = client;
+
+ st->regmap = devm_regmap_init_i2c(client, &max31827_regmap);
+ if (IS_ERR(st->regmap))
+ return dev_err_probe(dev, PTR_ERR(st->regmap),
+ "Failed to allocate regmap: %ld\n",
+ PTR_ERR(st->regmap));
+
+ ret = max31827_init_client(st);
+ if (ret)
+ return ret;
+
+ hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, st,
+ &max31827_chip_info,
+ NULL);
+
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct i2c_device_id max31827_i2c_ids[] = {
+ { .name = "max31827" },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, max31827_i2c_ids);
+
+static const struct of_device_id max31827_of_match[] = {
+ { .compatible = "max31827" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, max31827_of_match);
+
+static struct i2c_driver max31827_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "max31827",
+ .of_match_table = max31827_of_match,
+ },
+ .probe_new = max31827_probe,
+ .id_table = max31827_i2c_ids,
+};
+module_i2c_driver(max31827_driver);
+
+MODULE_AUTHOR("Daniel Matyas <daniel.matyas@xxxxxxxxxx>");
+MODULE_DESCRIPTION("Maxim MAX31827 low-power temperature switch driver");
+MODULE_LICENSE("GPL");
--
2.34.1