[PATCH v2 5/8] regulator: fan53555: Make use of the bit macros

[Cristian Ciocaltea]

For consistency and improved clarity, use BIT() and GENMASK() macros for
defining the bitfields inside the registers. No functional changes
intended.

While here, also fix DIE_{ID,REV} inconsistent indentation.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
---
 drivers/regulator/fan53555.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index 68ebcd4ccef7..181e5eb00e7a 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -41,23 +41,23 @@
 #define FAN53555_MONITOR	0x05
 
 /* VSEL bit definitions */
-#define VSEL_BUCK_EN	(1 << 7)
-#define VSEL_MODE		(1 << 6)
+#define VSEL_BUCK_EN		BIT(7)
+#define VSEL_MODE		BIT(6)
 /* Chip ID and Verison */
-#define DIE_ID		0x0F	/* ID1 */
-#define DIE_REV		0x0F	/* ID2 */
+#define DIE_ID			0x0F	/* ID1 */
+#define DIE_REV			0x0F	/* ID2 */
 /* Control bit definitions */
-#define CTL_OUTPUT_DISCHG	(1 << 7)
-#define CTL_SLEW_MASK		(0x7 << 4)
-#define CTL_RESET			(1 << 2)
+#define CTL_OUTPUT_DISCHG	BIT(7)
+#define CTL_SLEW_MASK		GENMASK(6, 4)
+#define CTL_RESET		BIT(2)
 #define CTL_MODE_VSEL0_MODE	BIT(0)
 #define CTL_MODE_VSEL1_MODE	BIT(1)
 
 #define FAN53555_NVOLTAGES	64	/* Numbers of voltages */
 #define FAN53526_NVOLTAGES	128
 
-#define TCS_VSEL0_MODE		(1 << 7)
-#define TCS_VSEL1_MODE		(1 << 6)
+#define TCS_VSEL0_MODE		BIT(7)
+#define TCS_VSEL1_MODE		BIT(6)
 
 #define TCS_SLEW_MASK		GENMASK(4, 3)
 
-- 
2.40.0