Re: [PATCH V3 2/5] regulator: qcom_smd: Add MP5496 S1 regulator

[Konrad Dybcio]

On 6.04.2023 09:00, Devi Priya wrote:
> Adding support for MP5496 S1 regulator on IPQ9574 SoC.
> 
> Co-developed-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
> Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
> Signed-off-by: Devi Priya <quic_devipriy@xxxxxxxxxxx>
> ---
>  Changes in V3:
> 	- No change
> 
>  drivers/regulator/qcom_smd-regulator.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
> index 6f722b2d682e..cb77b3bd1723 100644
> --- a/drivers/regulator/qcom_smd-regulator.c
> +++ b/drivers/regulator/qcom_smd-regulator.c
> @@ -749,6 +749,15 @@ static const struct regulator_desc pms405_pldo600 = {
>  	.ops = &rpm_smps_ldo_ops,
>  };
>  
> +static const struct regulator_desc mp5496_smpa1 = {
> +	.linear_ranges = (struct linear_range[]) {
> +		REGULATOR_LINEAR_RANGE(600000, 0, 127, 12500),
> +	},
> +	.n_linear_ranges = 1,
> +	.n_voltages = 128,
> +	.ops = &rpm_mp5496_ops,
> +};
> +
As far as I can tell, this is identical to struct mp5496_smpa2, so
this patch could come down to:

- static const struct regulator_desc mp5496_smpa1 = {
+ static const struct regulator_desc mp5496_smps = {



+	{ "s1", QCOM_SMD_RPM_SMPA, 1, &mp5496_smps, "s1" },
-  	{ "s2", QCOM_SMD_RPM_SMPA, 2, &mp5496_smpa2, "s2" },
+	{ "s2", QCOM_SMD_RPM_SMPA, 2, &mp5496_smps, "s2" },

Konrad
>  static const struct regulator_desc mp5496_smpa2 = {
>  	.linear_ranges = (struct linear_range[]) {
>  		REGULATOR_LINEAR_RANGE(600000, 0, 127, 12500),
> @@ -794,6 +803,7 @@ struct rpm_regulator_data {
>  };
>  
>  static const struct rpm_regulator_data rpm_mp5496_regulators[] = {
> +	{ "s1", QCOM_SMD_RPM_SMPA, 1, &mp5496_smpa1, "s1" },
>  	{ "s2", QCOM_SMD_RPM_SMPA, 2, &mp5496_smpa2, "s2" },
>  	{ "l2", QCOM_SMD_RPM_LDOA, 2, &mp5496_ldoa2, "l2" },
>  	{}