Re: [PATCH net] net: sfp: initialize sfp->i2c_block_size at sfp allocation

[Jakub Kicinski]

On Wed,  5 Apr 2023 18:39:00 +0300 Ivan Bornyakov wrote:
> sfp->i2c_block_size is initialized at SFP module insertion in
> sfp_sm_mod_probe(). Because of that, if SFP module was not inserted
> since boot, ethtool -m leads to zero-length I2C read attempt.
> 
>   # ethtool -m xge0
>   i2c i2c-3: adapter quirk: no zero length (addr 0x0050, size 0, read)
>   Cannot get Module EEPROM data: Operation not supported
> 
> If SFP module was plugged then removed at least once,
> sfp->i2c_block_size will be initialized and ethtool -m will fail with
> different error
> 
>   # ethtool -m xge0
>   Cannot get Module EEPROM data: Remote I/O error
> 
> Fix this by initializing sfp->i2_block_size at struct sfp allocation
> stage so ethtool -m with SFP module removed will fail the same way, i.e.
> -EREMOTEIO, in both cases and without errors from I2C adapter.

Hi Russell - yes / no / come back when both patches are ready?