Re: [PATCH V3 4/5] arm64: dts: qcom: ipq9574: Add SMPA1 regulator node

[Devi Priya]

On 4/7/2023 1:17 AM, Konrad Dybcio wrote:
> On 6.04.2023 09:00, Devi Priya wrote:
> > Add support for SMPA1 regulator node in IPQ9574.
> >
> > Co-developed-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
> > Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
> > Signed-off-by: Devi Priya <quic_devipriy@xxxxxxxxxxx>
> > ---
> >   Changes in V3:
> > 	- Updated the regulator-min-microvolt with the SVS voltage 725000uV
> >
> >   arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 19 +++++++++++++++++++
> >   1 file changed, 19 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> > index 3ae38cf327ea..06f579b1c590 100644
> > --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> > +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> > @@ -44,6 +44,25 @@
> >   	};
> >   };
> >   
> > +&rpm_requests {
> > +	regulators {
> > +		compatible = "qcom,rpm-mp5496-regulators";
> > +
> > +		ipq9574_s1: s1 {
> > +		/*
> > +		 * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders.
> > +		 * During regulator registration, kernel not knowing the initial voltage,
> > +		 * considers it as zero and brings up the regulators with minimum supported voltage.
>
> > +		 * Updating the regulator-min-microvolt with SVS voltage of 725000uV so that
> s/Updating/Update
> s/725000uV/725mV here and below (for consistency with the first mention
> of 800mV)
Sure, will update!
> Konrad
> > +		 * the regulators are brought up with 725000uV which is sufficient for all the
> > +		 * corner parts to operate at 800MHz
> > +		 */
> > +			regulator-min-microvolt = <725000>;
> > +			regulator-max-microvolt = <1075000>;
> > +		};
> > +	};
> > +};
> > +
> >   &pcie1_phy {
> >   	status = "okay";
> >   };