[PATCH v2 1/2] dt-bindings: leds: ROHM BD2606MVV LED driver

[Andreas Kemnade]

Document ROHM BD2606MVV LED driver devicetree bindings.

Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
---
 .../bindings/leds/rohm,bd2606mvv.yaml         | 83 +++++++++++++++++++
 1 file changed, 83 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml

diff --git a/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml b/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
new file mode 100644
index 0000000000000..7f53d09e7b054
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/rohm,bd2606mvv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BD2606MVV LED controller
+
+maintainers:
+  - Andreas Kemnade <andreas@xxxxxxxxxxxx>
+
+description:
+  The BD2606 MVV is a programmable LED controller connected via I2C that can
+  drive 6 separate lines. Each of them can be individually switched on and off
+  but the brightness setting is shared between two of them.
+
+  Datasheet is available at
+  https://fscdn.rohm.com/en/products/databook/datasheet/ic/power/led_driver/bd2606mvv_1-e.pdf
+
+properties:
+  compatible:
+    const: rohm,bd2606mvv
+
+  reg:
+    description: I2C slave address of the controller.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO pin to enable/disable the device.
+
+patternProperties:
+  "^led@[0-6]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 6
+
+    required:
+      - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/leds/common.h>
+
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@66 {
+            compatible = "rohm,bd2606mvv";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0x66>;
+
+            led@0 {
+                color = <LED_COLOR_ID_RED>;
+                function = LED_FUNCTION_POWER;
+                reg = <0x0>;
+            };
+
+            led@2 {
+                color = <LED_COLOR_ID_WHITE>;
+                function = LED_FUNCTION_STATUS;
+                reg = <0x2>;
+            };
+        };
+    };
+
+...
-- 
2.39.2