Re: [PATCH v5 00/12] Improve the MT8365 SoC and EVK board support

[Alexandre Mergnat]

+ To: Catalin Marinas <catalin.marinas@xxxxxxx>
+ To: Will Deacon <will@xxxxxxxxxx>

Sorry for the noise.

Regards,
Alexandre

Le ven. 7 avr. 2023 à 14:59, Alexandre Mergnat <amergnat@xxxxxxxxxxxx> a écrit :
>
> This commits are based on the Fabien Parent <fparent@xxxxxxxxxxxx> work.
>
> The purpose of this series is to add the following HWs / IPs support for
> the mt8365-evk board:
> - Watchdog
> - Power Management Integrated Circuit "PMIC" wrapper
> - MT6357 PMIC
> - MultiMediaCard "MMC" & Secure Digital "SD" controller
> - USB controller
> - Ethernet MAC controller
>
> Add CPU Freq & IDLE support for this board.
>
> This series depends to anothers which add support for MT8365 EVK board
> [1], add the MT8365 I2C support [2] (both are currently applied) and
> finally the pinctrl binding cleanup [3].
>
> === Build:
>
> To test this serie, cherry-pick patches from the dependent series ([1],[2],[3])
> and the applied patches from this serie (documented in the "Changes" below).
> Be carefull, the pinctrl serie [3] is rebased to linusw/linux-pinctrl,
> cherry-pick will not be straightforward.
> Finally, cherry-pick this serie.
>
> You can also take my branch [4] which have all the needed patches
> retrieved from the instructions above.
>
> Use the arm64 defconfig to make the build.
>
> Regards,
> Alex
>
> [1]: https://lore.kernel.org/all/20230309213501.794764-1-bero@xxxxxxxxxxxx/
> [2]: https://lore.kernel.org/all/20221122-mt8365-i2c-support-v6-0-e1009c8afd53@xxxxxxxxxxxx/
> [3]: https://lore.kernel.org/all/20230327-cleanup-pinctrl-binding-v3-0-6f56d5c7a8de@xxxxxxxxxxxx/
> [4]: https://gitlab.baylibre.com/baylibre/mediatek/bsp/linux/-/commits/amergnat/i350-evk-board-support
>
> Signed-off-by: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
> ---
> Changes in v5:
> - Add patches to build the MT6357 regulator driver and MTK PMIC keys by default
> - Remove "dt-bindings: pinctrl: mediatek,mt8365-pinctrl: add drive strength property"
>   patch from this serie and add it to the pinctrl serie [3]
> - Link to v4: https://lore.kernel.org/r/20230203-evk-board-support-v4-0-5cffe66a38c0@xxxxxxxxxxxx
>
> Changes in v4:
> - Remove v3 applied patch from the serie:
>   - arm64: dts: mediatek: add ethernet support for mt8365 SoC
>   - arm64: dts: mediatek: add mmc support for mt8365 SoC
>   - arm64: dts: mediatek: add mt6357 device-tree
>   - arm64: dts: mediatek: add pwrap support to mt8365 SoC
>   - arm64: dts: mediatek: Increase the size BL31 reserved memory
> - Drop "arm64: dts: mediatek: fix systimer properties" which is done [1]
> - Fix style, typo and re-order properties.
> - Use interrupts-extended for the PMIC node.
> - Link to v3: https://lore.kernel.org/r/20230203-evk-board-support-v3-0-0003e80e0095@xxxxxxxxxxxx
>
> Changes in v3:
> - Remove v2 applied patch from the serie:
>   - dt-bindings: mmc: mediatek,mtk-sd: add mt8365
> - Add trailers and simply resend.
> - Link to v2: https://lore.kernel.org/r/20230203-evk-board-support-v2-0-6ec7cdb10ccf@xxxxxxxxxxxx
>
> ---
> Alexandre Mergnat (10):
>       arm64: defconfig: enable MT6357 regulator
>       arm64: defconfig: enable Mediatek PMIC key
>       dt-bindings: watchdog: mediatek,mtk-wdt: add mt8365
>       arm64: dts: mediatek: add watchdog support for mt8365 SoC
>       arm64: dts: mediatek: add mt6357 PMIC support for  mt8365-evk
>       arm64: dts: mediatek: add mmc support for mt8365-evk
>       arm64: dts: mediatek: add usb controller support for mt8365-evk
>       arm64: dts: mediatek: add ethernet support for mt8365-evk
>       arm64: dts: mediatek: add OPP support for mt8365 SoC
>       arm64: dts: mediatek: add cpufreq support for mt8365-evk
>
> Amjad Ouled-Ameur (1):
>       arm64: dts: mediatek: Add CPU Idle support
>
> Fabien Parent (1):
>       arm64: dts: mediatek: set vmc regulator as always on
>
>  .../bindings/watchdog/mediatek,mtk-wdt.yaml        |   1 +
>  arch/arm64/boot/dts/mediatek/mt8365-evk.dts        | 249 +++++++++++++++++++++
>  arch/arm64/boot/dts/mediatek/mt8365.dtsi           | 142 ++++++++++++
>  arch/arm64/configs/defconfig                       |   3 +
>  4 files changed, 395 insertions(+)
> ---
> base-commit: 4f2a499a344b36ebb325e610265452ea88541116
> change-id: 20230203-evk-board-support-d5b7a839ed7b
>
> Best regards,
> --
> Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
>