Re: [PATCH 2/2] dt-bindings: input: cirrus,cs40l26: Add bindings

[Rob Herring]

On Thu, 06 Apr 2023 17:20:13 -0500, Fred Treven wrote:
> Add devicetree bindings for CS40L26 driver.
> 
> Signed-off-by: Fred Treven <fred.treven@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/input/cs40l26.yaml         | 92 ++++++++++++++++++++++
>  MAINTAINERS                                        |  1 +
>  2 files changed, 93 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/cs40l26.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/input/cs40l26.example.dts:24.13-26: Warning (reg_format): /example-0/i2c/cs40l26@58:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/input/cs40l26.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/input/cs40l26.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/input/cs40l26.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/input/cs40l26.example.dts:21.13-34.11: Warning (i2c_bus_bridge): /example-0/i2c: incorrect #address-cells for I2C bus
Documentation/devicetree/bindings/input/cs40l26.example.dts:21.13-34.11: Warning (i2c_bus_bridge): /example-0/i2c: incorrect #size-cells for I2C bus
Documentation/devicetree/bindings/input/cs40l26.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/input/cs40l26.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'i2c_bus_bridge'
Documentation/devicetree/bindings/input/cs40l26.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/input/cs40l26.example.dts:22.31-33.13: Warning (avoid_default_addr_size): /example-0/i2c/cs40l26@58: Relying on default #address-cells value
Documentation/devicetree/bindings/input/cs40l26.example.dts:22.31-33.13: Warning (avoid_default_addr_size): /example-0/i2c/cs40l26@58: Relying on default #size-cells value
Documentation/devicetree/bindings/input/cs40l26.example.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size'
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/input/cs40l26.example.dtb: cs40l26@58: 'cirrus,bst-exploratory-mode-disabled', 'reset-gpios' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/input/cs40l26.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/1680819613-29256-1-git-send-email-fred.treven@xxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.