[PATCH] arm64: dts: qcom: apq8016: remove superfluous "input-enable"

[Krzysztof Kozlowski]

Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers.  Since
patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
input-enable") the property is not accepted anymore.

Cc: Douglas Anderson <dianders@xxxxxxxxxxxx>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index 27ceaa94c8bd..59860a2223b8 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -729,7 +729,6 @@ usb_id_default: usb-id-default-state {
 		function = "gpio";
 
 		drive-strength = <8>;
-		input-enable;
 		bias-pull-up;
 	};
 
@@ -770,7 +769,6 @@ msm_key_volp_n_default: msm-key-volp-n-default-state {
 		function = "gpio";
 
 		drive-strength = <8>;
-		input-enable;
 		bias-pull-up;
 	};
 };
-- 
2.34.1